Because long polling may have to be informed that the scopep was cancelled, the isActive checks are added so it can't happen that messages are added when they shouldn't.
I could not reproduce the scenario, anyway the checks should make sense in my opinion.
Signed-off-by: Marcel Hibbe <dev@mhibbe.de>
This is necessary especially to cancel the long polling when configuration change was made, e.g. screen was rotated. Otherwise multiple long polling requests would be running after configuration changes.
Because it not possible to launch a new coroutine in a scope that was canceled, it is necessary to re-initialize the scope.
Signed-off-by: Marcel Hibbe <dev@mhibbe.de>
if chatMessageList is empty after handleSystemMessages it makes no sense to call the following methods.
Also processMessagesFromTheFuture was executed which caused that the popup was shown.
A better solution for the future should be to handle(remove) the "to-hide" system messages already in the repo or viewmodel
Signed-off-by: Marcel Hibbe <dev@mhibbe.de>
The idea to show the progress bar (aka shimmer animation) was that it show not be shown at all if loading messages happens in less than a second (this was a better UX in my opinion).
The idea was to hide the progress bar when
ChatMessageStartState was triggered.
However there can be moment when adapter is still empty after ChatMessageStartState and if in this moment the DELAY_TO_SHOW_PROGRESS_BAR is reached before the adapter is actually filled, the overlay happens.
It could be a solution to move the hiding of the progress bar, however then special cases might have to be handled.
For simplicity, the logic for DELAY_TO_SHOW_PROGRESS_BAR is removed. Progress bar is always shown without a delay so it wont be triggered on a later moment and can't overlay the chat.
Signed-off-by: Marcel Hibbe <dev@mhibbe.de>
By using
networkMonitor.isOnline.first()
the function
unregisterNetworkCallback
was triggered, which sometimes causes the ConnectivityManager$TooManyRequestsException.
So each time isOnline.first() was called, the callbackFlow would:
- Register a new NetworkCallback.
- Emit a value and cancel the flow.
- Unregister the NetworkCallback.
The exception was:
Exception android.net.ConnectivityManager$TooManyRequestsException:
at android.net.ConnectivityManager.convertServiceException (ConnectivityManager.java:3771)
at android.net.ConnectivityManager.sendRequestForNetwork (ConnectivityManager.java:3960)
at android.net.ConnectivityManager.sendRequestForNetwork (ConnectivityManager.java:3967)
at android.net.ConnectivityManager.registerNetworkCallback (ConnectivityManager.java:4349)
at android.net.ConnectivityManager.registerNetworkCallback (ConnectivityManager.java:4319)
at com.nextcloud.talk.data.network.NetworkMonitorImpl$isOnline$1.invokeSuspend (NetworkMonitorImpl.kt:61)
To fix this, the cold flow from callbackFlow is converted to a StateFlow.
Signed-off-by: Marcel Hibbe <dev@mhibbe.de>
It seems there could have been a race condition because currentUser was initialized too late.
I was not able to reproduce but hopefully this fixes it:
- initialize currentUser earlier (moved from onResume to onCreate)
- use currentUserProvider instead userManager
NPEs were reported via gplay:
1)
Exception java.lang.NullPointerException:
at com.nextcloud.talk.conversationlist.ConversationsListActivity.addToConversationItems (ConversationsListActivity.kt:851)
at com.nextcloud.talk.conversationlist.ConversationsListActivity.access$addToConversationItems (ConversationsListActivity.kt:151)
at com.nextcloud.talk.conversationlist.ConversationsListActivity$initObservers$5$1.invokeSuspend (ConversationsListActivity.kt:394)
at com.nextcloud.talk.conversationlist.ConversationsListActivity$initObservers$5$1.invoke (Unknown Source:8)
at com.nextcloud.talk.conversationlist.ConversationsListActivity$initObservers$5$1.invoke (Unknown Source:4)
2)
Exception java.lang.RuntimeException:
at android.app.ActivityThread.performResumeActivity (ActivityThread.java:5427)
at android.app.ActivityThread.handleResumeActivity (ActivityThread.java:5508)
...
Caused by java.lang.NullPointerException:
at com.nextcloud.talk.conversationlist.ConversationsListActivity.shouldShowNotificationWarning (ConversationsListActivity.kt:1557)
Signed-off-by: Marcel Hibbe <dev@mhibbe.de>
by moving networkMonitor.isOnline to separate check and by setting
binding.checkMark.visibility = View.INVISIBLE
binding.sendingProgress.visibility = View.GONE
before setting the status icons
to to handle recyclerview behavior
Signed-off-by: Marcel Hibbe <dev@mhibbe.de>
If user sent a message as a first message in today's chat, the temp message will be deleted when messages are retrieved from server, but also the date has to be deleted as it will be added again when the chat messages are added from server. Otherwise date "Today" would be shown twice.
Signed-off-by: Marcel Hibbe <dev@mhibbe.de>
reason was that the UI was not yet loaded but isScrolledToBottom was already called, so findFirstVisibleItemPosition returned -1.
Fix for now is to return true for isScrolledToBottom when position is -1
They does not solve the root cause for now. It should be made sure the code is not executed until UI is ready.
A quick try with
repeatOnLifecycle(Lifecycle.State.STARTED)
when collecting getMessageFlow did not help.
Signed-off-by: Marcel Hibbe <dev@mhibbe.de>
TODO:
check id type --> see TODO "currentTimeMillies fails as id because later on in the model it's not Long but Int!!!!" in OfflineFirstChatRepository.kt
Signed-off-by: Marcel Hibbe <dev@mhibbe.de>
(as datasources should be only used in repositories)
use coroutines instead RxJava for api calls triggered by MessageInputViewModel
Signed-off-by: Marcel Hibbe <dev@mhibbe.de>
The speaking state is still sent only through data channels, as it is
not currently handled by other clients when sent through signaling
messages.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Note that this implicitly send the current state to remote participants
when the local participant joins, as in that case all the remote
participants already in the call join from the point of view of the
local participant
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
This is not possible when Janus is used, as Janus only allows
broadcasting data channel messages to all the subscribers of the
publisher connection.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The LocalStateBroadcaster observes changes in the
LocalCallParticipantModel and notifies other participants in the call as
needed. Although it is created right before joining the call there is a
slim chance of the state changing before the local participant is
actually in the call, but even in that case other participants would not
be notified about the state due to the MessageSender depending on the
list of call participants / peer connections passed to it, which should
not be initialized before the local participant is actually in the call.
There is, however, a race condition that could cause participants to not
be added to the participant list if they join at the same time as the
local participant and a signaling message listing them but not the local
participant as in the call is received once the CallParticipantList was
created, but that is unrelated to the broadcaster and will be fixed
in another commit.
Currently only changes in the audio, speaking and video state are
notified, although in the future it should also notify about the nick,
the raised hand or any other state (but not one-time events, like
reactions). The notifications right now are sent only through data
channels, but at a later point they will be sent also through signaling
messages as needed.
Similarly, although right now it only notifies of changes in the state
it will also take care of notifying other participants about the current
state when they join the call (or the local participant joins).
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
This is the counterpart of CallParticipantModel for the local
participant. For now it just stores whether audio and video are enabled
or not, and whether the local participant is speaking or not, but it
will be eventually extended with further properties.
It is also expected that the views, like the button with the microphone
state, will update themselves based on the model. Similarly the model
should be moved from the CallActivity to a class similar to
CallParticipant but for the local participant. In any case, all that is
something for the future; the immediate use of the model will be to know
when the local state changes to notify other participants.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Data channel messages are expected to be sent only to peer connections
with "video" type, which provide the audio and video tracks of the
participant (and, in fact, peer connections for screen shares do not
even have data channels enabled in the WebUI).
Note that this could change if at some point several audio/video tracks
are sent in the same peer connection, or if "speaking" messages are
added to screen shares, but that will be addressed if/when that happens.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
For now it just provides support for sending a data channel message to
all participants, so notifying all participants when the media is
toggled or the speaking status change can be directly refactored to use
it.
While it would have been fine to use a single class for both MCU and no
MCU they were split for easier and cleaner unit testing in future
stages.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
"hasMCU" (which has always been the wrong name, because it is an SFU
rather than an MCU, but it is wrong even in the signaling server so for
now the legacy name is kept) was set again and again whenever the call
participant list changed. Now it is set instead once its value is known,
that is, when it is known that the internal signaling server is used (as
no "MCU" is used in that case), or when the connection with the external
signaling server is established, as its supported features are not known
until then.
This change should have no effect in the usages of "hasMCU", as it is
used when the call participant list change, which will happen only after
joining the call in the signaling server, or when sending "isSpeaking"
and toggling media, in both cases guarded by "isConnectionEstablished",
which will be true only once "performCall" was called or if the call is
active with other participants.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The SDP constraints for publisher connections when the MCU is used were
set for all connections. Those constraints set "OfferToReceiveAudio" and
"OfferToReceiveVideo" to false, which disables receiving audio and video
when the local participant is the one sending the offer. Therefore,
audio and video was not received when the MCU was not used and the local
participant was the one initiating the connection.
The "OfferToReceiveXXX" configurations have no effect when set on an
answer (and thus are not even set, an empty MediaConstraints is used in
that case). However, when "OfferToReceiveVideo = false" is set the video
transceiver is explicitly stopped (which is used to avoid receiving
video when joining a call with audio only). Therefore, as
"OfferToReceiveVideo = false" was always set, video was never received
in subscriber connections when the MCU is used, or connections initiated
by the other peer when the MCU is not used.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The SDP constraints should be set when the MCU is used, but only for
publisher connections; receiver connections should use the general SDP
constraints.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
When the data channel is not open yet data channel messages are queued
and then sent once opened. "onStateChange" is called from the WebRTC
signaling thread, while "send" can be called potentially from any
thread, so to send the data channel messages in the same order that they
were added new messages need to be enqueued until all the pending
messages have been sent. Otherwise, even if there is synchronization
already, it could happen that "onStateChange" was called but, before
getting the lock, "send" gets it and sends the new message before the
pending messages were sent.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Adding and disposing remote data channels is done from different
threads; they are added from the WebRTC signaling thread when
"onDataChannel" is called, while they can be disposed potentially from
any thread when "removePeerConnection" is called. To prevent race
conditions between them now both operations are synchronized.
However, as "onDataChannel" belongs to an inner class it needs to use a
synchronized statement with the outer class lock. This could still cause
a race condition if the same data channel was added again; this should
not happen, but it is handled just in case.
Moreover, once a data channel is disposed it can be no longer used, and
trying to call any of its methods throws an "IllegalStateException". Due
to this, as sending can be also done potentially from any thread, it
needs to be synchronized too with removing the peer connection.
State changes on data channels as well as receiving messages are also
done in the WebRTC signaling thread. State changes needs synchronization
as well, although receiving messages should not, as it does not directly
use the data channel (and it is assumed that using the buffers of a
disposed data channel is safe). Nevertheless a little check (which in
this case requires synchronization) was added to ignore the received
messages if the peer connection was removed already.
Finally, the synchronization added to "send" and "onStateChange" had the
nice side effect of making the pending data channel messages thread-safe
too, as before it could happen that a message was enqueued when the
pending messages were being sent, which caused a
"ConcurrentModificationException".
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Getting the label is no longer possible once the data channel has been
disposed. This will help to make the observer thread-safe.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Data channel messages can be sent only when the data channel is open.
Otherwise the message is simply lost. Clients of the
PeerConnectionWrapper do not need to be aware of that detail or keep
track of whether the data channel was open already or not, so now data
channel messages sent before the data channel is open are queued and
sent once the data channel is opened.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Data channel messages are expected to be sent using the "status" data
channel that is locally created. However, if another data channel was
opened by the remote peer the reference to the "status" data channel was
overwritten with the new data channel, and messages were sent instead on
the remote data channel.
In current Talk versions that was not a problem, and the change makes no
difference either, because since the support for Janus 1.x was added
data channel messages are listened on all data channels, independently
of their label or whether they were created by the local or remote peer.
However, in older Talk versions this fixes a regression introduced with
the support for Janus 1.x. In those versions only messages coming from
the "status" or "JanusDataChannel" data channels were taken into
account. When Janus is not used the WebUI opens the legacy
"simplewebrtc" data channel, so that data channel may be the one used to
send data channel messages (if it is open after the "status" data
channel), but the messages received on that data channel were ignored by
the WebUI. Nevertheless, at this point this is more an academic problem
than a real world problem, as it is unlikely that there are many
Nextcloud servers with Talk < 16 and without HPB being used.
Independently of all that, when the peer connection is removed only the
"status" data channel is disposed, but none of the remote data channels
are. This is just a variation of an already existing bug (the last open
data channel was the one disposed due to being the last saved reference,
but the rest were not) and it will be fixed in another commit.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The legacy name was a bit strange, so now it is renamed to just "send"
as the parameter type ("DataChannelMessage") gives enough context.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
This implicitly fixes trying to send the initial state on the latest
remote data channel found (which is the one stored in the "dataChannel"
attribute of the "PeerConnectionWrapper") when any other existing data
channel changes its status to open. Nevertheless, as all this will be
reworked, no unit test was added for it.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Log methods are static, so they can not be mocked using Mockito.
Although it might be possible to use PowerMockito a dummy implementation
was added instead, as Log uses are widespread and it is not something
worth mocking anyway.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The PeerConnectionWrapper does not need to be injected in the
application, nor the Context needs to be injected in the
PeerConnectionWrapper. This all seems to be leftovers from the past, and
removing them would ease adding unit tests for the
PeerConnectionWrapper.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
