damn release

- Can't really use BLOB (creates issue with HTTP visualizer)
- Player was stuck after WiFi loss b/c with some race conditions, BT deinit crashes and creates the reboot wanted after 5*5 failures. But when BT does not crash, reboot was not happening and player was stuck with slimproto not exited and player not rebooted

README.md

@@ -68,7 +68,7 @@ NB: You can use the pre-build binaries SqueezeAMP4MBFlash which has all the hard
 - spdif_config: bck=33,ws=25,do=15
 
 ### ESP32-A1S
-Works with [ESP32-A1S](https://docs.ai-thinker.com/esp32-a1s) module that includes audio codec and headset output. You still need to use a demo board like [this](https://www.aliexpress.com/item/4000765857347.html?spm=2114.12010615.8148356.11.5d963cd0j669ns) or an external amplifier if you want direct speaker connection. 
+Works with [ESP32-A1S](https://docs.ai-thinker.com/esp32-a1s) module that includes audio codec and headset output. You still need to use a demo board like [this](https://www.aliexpress.com/item/4001060963585.html) or an external amplifier if you want direct speaker connection. 
 
 The board shown above has the following IO set
 - amplifier: GPIO21
@@ -188,10 +188,10 @@ SPI,width=<pixels>,height=<pixels>,cs=<gpio>[,back=<gpio>][,reset=<gpio>][,speed
 - Default speed is 8000000 (8MHz) but SPI can work up to 26MHz or even 40MHz
 - SH1106 is 128x64 monochrome I2C/SPI [here]((https://www.waveshare.com/wiki/1.3inch_OLED_HAT))
 - SSD1306 is 128x32 monochrome I2C/SPI [here](https://www.buydisplay.com/i2c-blue-0-91-inch-oled-display-module-128x32-arduino-raspberry-pi)
-- SSD1322 is 128x128 16-level grayscale SPI [here](https://www.amazon.com/gp/product/B079N1LLG8/ref=ox_sc_act_title_1?smid=A1N6DLY3NQK2VM&psc=1) - artwork can be up to 96x96 with vertical vu-meter/spectrum
-- SSD1351 is 128x128 65k/262k color SPI [here](https://www.waveshare.com/product/displays/lcd-oled/lcd-oled-3/1.5inch-rgb-oled-module.htm)
+- SSD1322 is 256x64 grayscale 16-levels SPI in multiple sizes [here](https://www.buydisplay.com/oled-display/oled-display-module?resolution=159) - it is very nice
 - SSD1326 is 256x32 monochrome or grayscale 16-levels SPI [here](https://www.aliexpress.com/item/32833603664.html?spm=a2g0o.productlist.0.0.2d19776cyQvsBi&algo_pvid=c7a3db92-e019-4095-8a28-dfdf0a087f98&algo_expid=c7a3db92-e019-4095-8a28-dfdf0a087f98-1&btsid=0ab6f81e15955375483301352e4208&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_)
-- SSD1327 is 256x64 grayscale 16-levels SPI in multiple sizes [here](https://www.buydisplay.com/oled-display/oled-display-module?resolution=159) - it is very nice
+- SSD1327 is 128x128 16-level grayscale SPI [here](https://www.amazon.com/gp/product/B079N1LLG8/ref=ox_sc_act_title_1?smid=A1N6DLY3NQK2VM&psc=1) - artwork can be up to 96x96 with vertical vu-meter/spectrum
+- SSD1351 is 128x128 65k/262k color SPI [here](https://www.waveshare.com/product/displays/lcd-oled/lcd-oled-3/1.5inch-rgb-oled-module.htm)
 - SSD1675 is an e-ink paper and is experimental as e-ink is really not suitable for LMS du to its very low refresh rate
 - ST7735 is a 128x160 65k color SPI [here](https://www.waveshare.com/product/displays/lcd-oled/lcd-oled-3/1.8inch-lcd-module.htm). This needs a backlight control
 - ST7789 is a 240x320 65k (262k not enabled) color SPI [here](https://www.waveshare.com/product/displays/lcd-oled/lcd-oled-3/2inch-lcd-module.htm). It also exist with 240x240 displays. See **rotate** for use in portrait mode

components/driver_bt/bt_app_sink.c

@@ -133,12 +133,14 @@ static void bt_next(bool pressed) {
 }
 
 const static actrls_t controls = {
+	NULL, // power
 	bt_volume_up, bt_volume_down,	// volume up, volume down
 	bt_toggle, bt_play,	// toggle, play
 	bt_pause, bt_stop,	// pause, stop
 	NULL, NULL,			// rew, fwd
 	bt_prev, bt_next,	// prev, next
 	NULL, NULL, NULL, NULL, // left, right, up, down
+	NULL, NULL, NULL, NULL, NULL, NULL, // pre1-6
 	bt_volume_down, bt_volume_up, bt_toggle// knob left, knob_right, knob push
 };
 

components/raop/raop_sink.c

@@ -81,12 +81,14 @@ static void raop_next(bool pressed) {
 }
 
 const static actrls_t controls = {
+	NULL,								// power
 	raop_volume_up, raop_volume_down,	// volume up, volume down
 	raop_toggle, raop_play,				// toggle, play
 	raop_pause, raop_stop,				// pause, stop
 	NULL, NULL,							// rew, fwd
 	raop_prev, raop_next,				// prev, next
 	NULL, NULL, NULL, NULL, // left, right, up, down
+	NULL, NULL, NULL, NULL, NULL, NULL, NULL, // pre1-6
 	raop_volume_down, raop_volume_up, raop_toggle// knob left, knob_right, knob push
 };
 

components/services/audio_controls.c

@@ -55,6 +55,7 @@ static const actrls_config_map_t actrls_config_map[] =
 		};
 
 // BEWARE: the actions below need to stay aligned with the corresponding enum to properly support json parsing
+//   along with the actrls_t controls in LMS_controls, bt_sink and raop_sink
 #define EP(x) [x] = #x  /* ENUM PRINT */
 static const char * actrls_action_s[ ] = { EP(ACTRLS_POWER),EP(ACTRLS_VOLUP),EP(ACTRLS_VOLDOWN),EP(ACTRLS_TOGGLE),EP(ACTRLS_PLAY),
 									EP(ACTRLS_PAUSE),EP(ACTRLS_STOP),EP(ACTRLS_REW),EP(ACTRLS_FWD),EP(ACTRLS_PREV),EP(ACTRLS_NEXT),

components/squeezelite/equalizer.c

@@ -7,13 +7,14 @@
  *  https://opensource.org/licenses/MIT
  *
  */
- 
+
+#include "platform_config.h"
 #include "squeezelite.h" 
 #include "equalizer.h"
 #include "esp_equalizer.h"
- 
-#define EQ_BANDS	10
 
+#define EQ_BANDS 10
+ 
 static log_level loglevel = lINFO;
  
 static struct {
@@ -21,6 +22,25 @@ static struct {
 	float gain[EQ_BANDS];
 	bool update;
 } equalizer = { .update = true };
+
+/****************************************************************************************
+ * initialize equalizer
+ */
+void equalizer_init(void) {
+	s8_t gain[EQ_BANDS] = { };
+	char *config = config_alloc_get(NVS_TYPE_STR, "equalizer");
+	char *p = strtok(config, ", !");	
+	
+	for (int i = 0; p && i < EQ_BANDS; i++) {
+		gain[i] = atoi(p);
+		p = strtok(NULL, ", :");
+	}
+			
+	free(config);	
+	equalizer_update(gain);
+		
+	LOG_INFO("initializing equalizer");
+}	
  
 /****************************************************************************************
  * open equalizer
@@ -68,7 +88,18 @@ void equalizer_close(void) {
  * update equalizer gain
  */
 void equalizer_update(s8_t *gain) {
-	for (int i = 0; i < EQ_BANDS; i++) equalizer.gain[i] = gain[i];
+	char config[EQ_BANDS * 4 + 1] = { };
+	char *p = config;
+	
+	for (int i = 0; i < EQ_BANDS; i++) {
+		equalizer.gain[i] = gain[i];
+		if (gain[i] < 0) *p++ = '-';
+		*p++ = (gain[i] / 10) + 0x30;
+		*p++ = (gain[i] % 10) + 0x30;
+		if (i < EQ_BANDS - 1) *p++ = ',';
+	}
+	
+	config_set_value(NVS_TYPE_STR, "equalizer", config);					
 	equalizer.update = true;
 }
 

components/squeezelite/equalizer.h

@@ -10,6 +10,7 @@
  
 #pragma once
 
+void equalizer_init(void);
 void equalizer_open(u32_t sample_rate);
 void equalizer_close(void);
 void equalizer_update(s8_t *gain);

components/squeezelite/output_embedded.c

@@ -73,11 +73,15 @@ void output_init_embedded(log_level level, char *device, unsigned output_buf_siz
 	slimp_handler_chain = slimp_handler;
 	slimp_handler = handler;
 	
+	// init equalizer before backends
+	equalizer_init();
+	
 	memset(&output, 0, sizeof(output));
 	output_init_common(level, device, output_buf_size, rates, idle);
 	output.start_frames = FRAME_BLOCK;
 	output.rate_delay = rate_delay;
 	
+	
 	if (strcasestr(device, "BT ") || !strcasecmp(device, "BT")) {
 		LOG_INFO("init Bluetooth");
 		close_cb = &output_close_bt;

components/squeezelite/output_i2s.c

@@ -573,10 +573,11 @@ static void output_thread_i2s(void *arg) {
 		SET_MIN_MAX( TIME_MEASUREMENT_GET(timer_start),i2s_time);
 		
 	}
-	
-	vTaskDelete(NULL);
+
 	if (spdif.enabled) free(spdif.buf);
 	ended = true;
+
+	vTaskDelete(NULL);	
 }
 
 /****************************************************************************************

main/esp_app_main.c

@@ -326,6 +326,9 @@ void register_default_nvs(){
 	ESP_LOGD(TAG,"Registering default value for key %s, value %s", "bypass_wm", "0");
 	config_set_default(NVS_TYPE_STR, "bypass_wm", "0", 0);
 
+	ESP_LOGD(TAG,"Registering default value for equalizer");
+	config_set_default(NVS_TYPE_STR, "equalizer", "", 0);
+
 	ESP_LOGD(TAG,"Registering default Audio control board type %s, value ","actrls_config");
 	config_set_default(NVS_TYPE_STR, "actrls_config", "", 0);