15 lines
1.5 KiB
Markdown
15 lines
1.5 KiB
Markdown
# JC4827W543 pin audit - ERRATA
|
|
|
|
*Based on verification against the official vendor repository at <https://github.com/lsdlsd88/JC4827W543>.*
|
|
|
|
**No errors were found in the original `JC4827W543_PIN_AUDIT.md` document.**
|
|
|
|
### Verification Notes:
|
|
- **Vendor IO pin distribution:** The `4.3 inches IO pin distribution.xlsx` file perfectly matches the pinout matrix in the audit document (e.g., IO45 for LCD_CS, IO47 for LCD_CLK, etc., and SPECK_LRCLK / SPECK_DIN / SPECK_BCLK correctly documented as I2S lines).
|
|
- **Display Configuration:** `Arduino_ESP32QSPI` code in `LvglWidgets.ino` verifies the QSPI display pins as `CS:45, SCK:47, D0:21, D1:48, D2:40, D3:39` matching the audit exactly.
|
|
- **Touch Controller:** Capacitive GT911 configuration uses `TOUCH_SDA = 8`, `TOUCH_SCL = 4`, `TOUCH_RES = 38`, `TOUCH_INT = 3` which aligns with the undocumented `RTP_CS (38)` being effectively co-opted for capacitive reset, confirming the finding in the original document.
|
|
- **Demos:** The DHT11 demo at `1-Demo/Demo_Arduino/4_9_WIFI Web Servers DHT11` indeed uses `GPIO 27`, and the `4_7_WIFI Web Servers LED` demo uses `GPIO 16/17`. These assignments are generic demo choices as noted in the original document and correctly do not conflict with the board specifications.
|
|
- **Proposed GPIOs:** The suggested GPIOs for motor control (`16`, `15`, `17`, `18`, `9`, `14`, `5`, `6`, `7`) are correctly identified as free based on the schematic and code.
|
|
|
|
The original document is factually sound and can be completely trusted as the authoritative reference for this project.
|