gronod
2458a61625
Lock P00–P08 with in/out scope, frozen APIs, verify commands, and one-phase-per-session protocol for the IDF modular UI work.
41 lines
1.7 KiB
Markdown
41 lines
1.7 KiB
Markdown
# P08 — Arduino debt burn-down
|
|
|
|
STATUS: TODO
|
|
DEPENDS: P06 (behaviour parity). P07 optional.
|
|
READ: this file, `components/hal_motor/**`, HAL headers from P03
|
|
OUT: recipe edits; UI redesign; LVGL-by-default
|
|
FORBIDDEN: behaviour change of times/stop/resume; dropping cooperative stop
|
|
|
|
## IN
|
|
|
|
Replace Arduino libs with IDF peripherals **behind the same HAL**. Remove Arduino-as-component from the S3 image first, then WROOM.
|
|
|
|
Order (one commit each, tests+builds green after each):
|
|
|
|
1. **Audio:** LEDC / `ledc_timer` tones; delete `tone()`.
|
|
2. **Motor:** RMT TX pulse train for STEP, GPIO DIR/EN. `hal_motor_request_stop` aborts RMT + EN HIGH. Delete AccelStepper. Same 4800 steps/rev, 60 RPM, accel ≈9600 (RMT may use a short ramp table).
|
|
3. **Temp:** RMT or `onewire_bus` IDF component; keep +0.4 °C offset. Delete Dallas/OneWire Arduino.
|
|
4. **Keypad:** GPIO matrix scan in `hal_input` (no Keypad lib). Same keymap.
|
|
5. **LCD 2004:** IDF I2C + HD44780 nibble commands (or `esp_lcd` panel io i2c). Delete LiquidCrystal_I2C.
|
|
6. Drop `espressif/arduino-esp32` from `idf_component.yml` when nothing includes Arduino.h.
|
|
|
|
Do not change `hal_*` public headers except adding RMT-specific internals in `.c`.
|
|
|
|
## VERIFY
|
|
|
|
Host tests pass (stubs unchanged).
|
|
|
|
Both boards build without Arduino component.
|
|
|
|
Hardware WROOM: Custom 10 s, Esc mid-step EN off, Resume remaining, temp display, beep Stop/Resume, complete alarm cancellable.
|
|
|
|
## COMMITS
|
|
|
|
Per numbered item above, e.g. `Replace AccelStepper with RMT step pulse HAL`.
|
|
|
|
## DoD
|
|
|
|
- [ ] `rg -n "Arduino.h|AccelStepper|LiquidCrystal|DallasTemperature|#include <Keypad.h>|#include <OneWire.h>"` empty in `main/` `components/`
|
|
- [ ] Stop still EN-off first
|
|
- [ ] STATUS→DONE
|