Update README.MD

Formatting
This commit is contained in:
gronod 2024-06-28 17:22:08 +01:00
parent ac9423c9cc
commit e6c12a2f03

View File

@ -58,28 +58,28 @@ Configure the project settings, including Wi-Fi credentials if necessary.
Upload the code to the ESP32 microcontroller. Upload the code to the ESP32 microcontroller.
### Usage ### Usage
1. Setup: 1. ## Setup:
- Ensure the development tank is clean and dry. - Ensure the development tank is clean and dry.
- Prepare the water bath and set the desired temperature using a sous vide heater or another closed-loop temperature control device. - Prepare the water bath and set the desired temperature using a sous vide heater or another closed-loop temperature control device.
- Submerge the development tank in the water bath. - Submerge the development tank in the water bath.
2. Initialization: 2. ## Initialization:
- Power on the device and wait for the initial setup to complete. - Power on the device and wait for the initial setup to complete.
3. Sequence Selection: 3. ## Sequence Selection:
- Select the desired development sequence from the options provided. - Select the desired development sequence from the options provided.
4. Processing Steps: 4. ## Processing Steps:
- For each processing step, follow these instructions: - For each processing step, follow these instructions:
1. Add Chemistry: Fill the tank with the required volume of the developing chemical. 1. ** Add Chemistry: ** Fill the tank with the required volume of the developing chemical.
2. Start Step: Begin the step by pressing the appropriate button on the keypad. The device will rotate and agitate as per the defined sequence. 2. ** Start Step: ** Begin the step by pressing the appropriate button on the keypad. The device will rotate and agitate as per the defined sequence.
3. Monitor Temperature: Ensure the water bath maintains the correct temperature range. 3. ** Monitor Temperature: ** Ensure the water bath maintains the correct temperature range.
4. Drain Chemistry: At the end of the step, drain the developing chemical from the tank. 4. ** Drain Chemistry: ** At the end of the step, drain the developing chemical from the tank.
5. Rinse and Repeat: Repeat the process for each subsequent step, adding and draining the appropriate chemicals as needed. 5. ** Rinse and Repeat: ** Repeat the process for each subsequent step, adding and draining the appropriate chemicals as needed.
5. Completion: 5. ## Completion:
- Follow standard procedures to dry the film. - Follow standard procedures to dry the film.