gronod/AutoFilm-ESP32
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Update README.MD

Browse Source 
Formatting
This commit is contained in:
gronod 2024-06-28 17:22:08 +01:00
parent ac9423c9cc
commit e6c12a2f03
1 changed files with 11 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
README.MD
View File

@ -57,29 +57,29 @@ Open the project in your preferred IDE (e.g., Arduino IDE, PlatformIO).
Configure the project settings, including Wi-Fi credentials if necessary.
Upload the code to the ESP32 microcontroller.
###Usage
1. Setup:
### Usage
1. ## Setup:
- Ensure the development tank is clean and dry.
- Prepare the water bath and set the desired temperature using a sous vide heater or another closed-loop temperature control device.
- Submerge the development tank in the water bath.
2. Initialization:
2. ## Initialization:
- Power on the device and wait for the initial setup to complete.
3. Sequence Selection:
3. ## Sequence Selection:
- Select the desired development sequence from the options provided.
4. Processing Steps:
4. ## Processing Steps:
- For each processing step, follow these instructions:
1. Add Chemistry: Fill the tank with the required volume of the developing chemical.
2. Start Step: Begin the step by pressing the appropriate button on the keypad. The device will rotate and agitate as per the defined sequence.
3. Monitor Temperature: Ensure the water bath maintains the correct temperature range.
4. Drain Chemistry: At the end of the step, drain the developing chemical from the tank.
5. Rinse and Repeat: Repeat the process for each subsequent step, adding and draining the appropriate chemicals as needed.
1. ** Add Chemistry: ** Fill the tank with the required volume of the developing chemical.
2. ** Start Step: ** Begin the step by pressing the appropriate button on the keypad. The device will rotate and agitate as per the defined sequence.
3. ** Monitor Temperature: ** Ensure the water bath maintains the correct temperature range.
4. ** Drain Chemistry: ** At the end of the step, drain the developing chemical from the tank.
5. ** Rinse and Repeat: ** Repeat the process for each subsequent step, adding and draining the appropriate chemicals as needed.
5. Completion:
5. ## Completion:
- Follow standard procedures to dry the film.