🔨 Migrate old-style base scripts s6-rc

tvheadend/rootfs/etc/s6-overlay/s6-rc.d/cron/finish

@@ -0,0 +1,27 @@
+#!/command/with-contenv bashio
+# shellcheck shell=bash
+# ==============================================================================
+# Home Assistant Community Add-on: TVHeadend
+# Take down the S6 supervision tree when cron fails
+# ==============================================================================
+declare exit_code
+readonly exit_code_container=$(</run/s6-linux-init-container-results/exitcode)
+readonly exit_code_service="${1}"
+readonly exit_code_signal="${2}"
+readonly service="cron"
+
+bashio::log.info \
+  "Service ${service} exited with code ${exit_code_service}" \
+  "(by signal ${exit_code_signal})"
+
+if [[ "${exit_code_service}" -eq 256 ]]; then
+  if [[ "${exit_code_container}" -eq 0 ]]; then
+    echo $((128 + $exit_code_signal)) > /run/s6-linux-init-container-results/exitcode
+  fi
+  [[ "${exit_code_signal}" -eq 15 ]] && exec /run/s6/basedir/bin/halt
+elif [[ "${exit_code_service}" -ne 0 ]]; then
+  if [[ "${exit_code_container}" -eq 0 ]]; then
+    echo "${exit_code_service}" > /run/s6-linux-init-container-results/exitcode
+  fi
+  exec /run/s6/basedir/bin/halt
+fi

tvheadend/rootfs/etc/s6-overlay/s6-rc.d/cron/run

@@ -1,4 +1,5 @@
 #!/usr/bin/with-contenv bashio
+# shellcheck shell=bash
 # ==============================================================================
 # Home Assistant Community Add-on: TVHeadend
 # Runs the cron daemon

tvheadend/rootfs/etc/s6-overlay/s6-rc.d/cron/type

@@ -0,0 +1 @@
+longrun

tvheadend/rootfs/etc/s6-overlay/s6-rc.d/init-customizations/run

@@ -1,4 +1,5 @@
 #!/usr/bin/with-contenv bashio
+# shellcheck shell=bash
 # ==============================================================================
 # Home Assistant Community Add-on: TVHeadend
 # Executes user customizations on startup

tvheadend/rootfs/etc/s6-overlay/s6-rc.d/init-customizations/type

@@ -0,0 +1 @@
+oneshot

tvheadend/rootfs/etc/s6-overlay/s6-rc.d/init-customizations/up

@@ -0,0 +1 @@
+/etc/s6-overlay/s6-rc.d/init-customizations/run

tvheadend/rootfs/etc/s6-overlay/s6-rc.d/init-tvheadend/run

@@ -1,4 +1,5 @@
 #!/usr/bin/with-contenv bashio
+# shellcheck shell=bash
 # ==============================================================================
 # Home Assistant Community Add-on: TVHeadend
 # Executes user customizations on startup

tvheadend/rootfs/etc/s6-overlay/s6-rc.d/init-tvheadend/type

@@ -0,0 +1 @@
+oneshot

tvheadend/rootfs/etc/s6-overlay/s6-rc.d/init-tvheadend/up

@@ -0,0 +1 @@
+/etc/s6-overlay/s6-rc.d/init-tvheadend/run

tvheadend/rootfs/etc/s6-overlay/s6-rc.d/tvheadend/finish

@@ -0,0 +1,27 @@
+#!/command/with-contenv bashio
+# shellcheck shell=bash
+# ==============================================================================
+# Home Assistant Community Add-on: TVHeadend
+# Take down the S6 supervision tree when tvheadend fails
+# ==============================================================================
+declare exit_code
+readonly exit_code_container=$(</run/s6-linux-init-container-results/exitcode)
+readonly exit_code_service="${1}"
+readonly exit_code_signal="${2}"
+readonly service="tvheadend"
+
+bashio::log.info \
+  "Service ${service} exited with code ${exit_code_service}" \
+  "(by signal ${exit_code_signal})"
+
+if [[ "${exit_code_service}" -eq 256 ]]; then
+  if [[ "${exit_code_container}" -eq 0 ]]; then
+    echo $((128 + $exit_code_signal)) > /run/s6-linux-init-container-results/exitcode
+  fi
+  [[ "${exit_code_signal}" -eq 15 ]] && exec /run/s6/basedir/bin/halt
+elif [[ "${exit_code_service}" -ne 0 ]]; then
+  if [[ "${exit_code_container}" -eq 0 ]]; then
+    echo "${exit_code_service}" > /run/s6-linux-init-container-results/exitcode
+  fi
+  exec /run/s6/basedir/bin/halt
+fi

tvheadend/rootfs/etc/s6-overlay/s6-rc.d/tvheadend/run

@@ -1,4 +1,5 @@
 #!/usr/bin/with-contenv bashio
+# shellcheck shell=bash
 # ==============================================================================
 # Home Assistant Community Add-on: TVHeadend
 # Starts TVHeadend

tvheadend/rootfs/etc/s6-overlay/s6-rc.d/tvheadend/type

@@ -0,0 +1 @@
+longrun

tvheadend/rootfs/etc/services.d/cron/finish

@@ -1,9 +0,0 @@
-#!/usr/bin/execlineb -S0
-# ==============================================================================
-# Home Assistant Community Add-on: TVHeadend
-# Take down the S6 supervision tree when crond fails
-# ==============================================================================
-if -n { s6-test $# -ne 0 }
-if -n { s6-test ${1} -eq 256 }
-
-s6-svscanctl -t /var/run/s6/services

tvheadend/rootfs/etc/services.d/tvheadend/finish

@@ -1,9 +0,0 @@
-#!/usr/bin/execlineb -S0
-# ==============================================================================
-# Home Assistant Community Add-on: TVHeadend
-# Take down the S6 supervision tree when TVHeadend fails
-# ==============================================================================
-if -n { s6-test $# -ne 0 }
-if -n { s6-test ${1} -eq 256 }
-
-s6-svscanctl -t /var/run/s6/services