lfs/appendices/dependencies.xml

<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE appendix PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
  "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
  <!ENTITY % general-entities SYSTEM "../general.ent">
  %general-entities;
  <!-- Convenient entity for "Systemd" or "Udev" -->
  <!ENTITY systemd-udev "<phrase revision='systemd'>Systemd</phrase>
                         <phrase revision='sysv'>Udev</phrase>">
]>

<appendix id="appendixc" xreflabel="Appendix C">
  <?dbhtml dir="appendices"?>
  <?dbhtml filename="dependencies.html"?>

  <title>Dependencies</title>

  <para>Every package built in LFS relies on one or more other packages in
  order to build and install properly. Some packages even participate in
  circular dependencies, that is, the first package depends on the second which
  in turn depends on the first. Because of these dependencies, the order in
  which packages are built in LFS is very important. The purpose of this page
  is to document the dependencies of each package built in LFS.</para>

  <para>For each package that is built, there are three, and sometimes up to
  five types of dependencies listed below. The first lists what other packages
  need to be available in order to compile and install the package in question.
  The second lists the packages that must be available when any programs or
  libraries from the package are used at runtime. The third lists what packages,
  in addition to those on the first list, need to be available in order to run
  the test suites. The fourth list of dependencies are packages that require
  this package to be built and installed in its final location before they are
  built and installed. In most cases, this is because these packages will hard
  code paths to binaries within their scripts. If not built in a certain order,
  this could result in paths of /tools/bin/[binary] being placed inside scripts
  installed to the final system. This is obviously not desirable.</para>

  <para>The last list of dependencies are optional packages that are not
  addressed in LFS, but could be useful to the user. These packages may have
  additional mandatory or optional dependencies of their own. For these
  dependencies, the recommended practice is to install them after completion of
  the LFS book and then go back and rebuild the LFS package. In several cases,
  re-installation is addressed in BLFS.</para>

<!-- Begin Acl dependency info -->
  <bridgehead renderas="sect2" id="acl-dep">Acl</bridgehead>

      <segmentedlist id="acl-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Attr, Bash, Binutils, Coreutils, GCC,  Gettext, Grep, M4, Make,
          Perl, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="acl-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Attr and Glibc</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="acl-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>Automake, Diffutils, Findutils, and
          Libtool</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="acl-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>Coreutils, Sed, Tar, and Vim</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="acl-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Attr dependency info -->
  <bridgehead renderas="sect2" id="attr-dep">Attr</bridgehead>

      <segmentedlist id="attr-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, GCC, Gettext, Glibc, Grep, M4, Make,
          Perl, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="attr-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="attr-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>Automake, Diffutils, Findutils, and Libtool</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="attr-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>Acl and Libcap</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="attr-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Autoconf dependency info -->
  <bridgehead renderas="sect2" id="autoconf-dep">Autoconf</bridgehead>

      <segmentedlist id="autoconf-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Coreutils, Grep, M4, Make, Perl, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="autoconf-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Bash, Coreutils, Grep, M4, Make, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="autoconf-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>Automake, Diffutils, Findutils, GCC, and Libtool</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="autoconf-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>Automake and Coreutils</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="autoconf-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>
            <ulink url="&blfs-book;postlfs/emacs.html">Emacs</ulink>
          </seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Automake dependency info -->
  <bridgehead renderas="sect2" id="automake-dep">Automake</bridgehead>

      <segmentedlist id="automake-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Autoconf, Bash, Coreutils, Gettext, Grep, M4, Make, Perl, Sed,
          and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="automake-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Bash, Coreutils, Grep, M4, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="automake-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>Binutils, Bison, Bzip2, DejaGNU, Diffutils, Expect, Findutils,
          Flex, GCC, Gettext, Gzip, Libtool, and Tar</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="automake-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>Coreutils</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="automake-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Bash dependency info -->
  <bridgehead renderas="sect2" id="bash-dep">Bash</bridgehead>

      <segmentedlist id="bash-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Bison, Coreutils, Diffutils, Gawk, GCC, Glibc,
          Grep, Make, Ncurses, Patch, Readline, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="bash-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc, Ncurses, and Readline</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="bash-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>Expect and Shadow</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="bash-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="bash-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>
            <ulink url="&blfs-book;x/installing.html">Xorg</ulink>
          </seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Bc dependency info -->
  <bridgehead renderas="sect2" id="bc-dep">Bc</bridgehead>

      <segmentedlist id="bc-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, GCC, Glibc, Grep, Make, and Readline</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="bc-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc, Ncurses, and Readline</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="bc-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>Gawk</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="bc-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>Linux</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="bc-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Binutils dependency info -->
  <bridgehead renderas="sect2" id="binutils-dep">Binutils</bridgehead>

      <segmentedlist id="binutils-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, Diffutils, File, Flex, Gawk, GCC,
          Glibc, Grep, Make, Perl, Sed, Texinfo, and Zlib</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="binutils-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc and Zlib</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="binutils-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>DejaGNU and Expect</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="binutils-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="binutils-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>
            <ulink url="https://sourceware.org/elfutils/">Elfutils</ulink> and
            <ulink url="&blfs-book;general/jansson.html">Jansson</ulink>
          </seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Bison dependency info -->
  <bridgehead renderas="sect2" id="bison-dep">Bison</bridgehead>

      <segmentedlist id="bison-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, GCC, Gettext, Glibc, Grep, M4, Make,
          Perl, and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="bison-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="bison-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>Diffutils, Findutils, and Flex</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="bison-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>Kbd and Tar</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="bison-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>
            <ulink url="&blfs-book;general/doxygen.html">Doxygen</ulink>
          </seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Bzip2 dependency info -->
  <bridgehead renderas="sect2" id="bzip2-dep">Bzip2</bridgehead>

      <segmentedlist id="bzip2-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, Diffutils, GCC, Glibc, Make, and
          Patch</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="bzip2-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="bzip2-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="bzip2-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>File and Libelf</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="bzip2-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Check dependency info -->
  <bridgehead renderas="sect2" id="check-dep">Check</bridgehead>

      <segmentedlist id="check-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Gawk, GCC, Grep, Make, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="check-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Bash and Gawk</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="check-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="check-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="check-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>
            <ulink url='&github;/testing-cabal/subunit'>libsubunit</ulink>
          </seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Coreutils dependency info -->
  <bridgehead renderas="sect2" id="coreutils-dep">Coreutils</bridgehead>

      <segmentedlist id="coreutils-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Autoconf, Automake, Bash, Binutils, Coreutils, GCC, Gettext,
          Glibc, GMP, Grep, Libcap, Make, OpenSSL, Patch, Perl, Sed, and
          Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="coreutils-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="coreutils-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>Diffutils, E2fsprogs, Findutils, Shadow, and  Util-linux</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="coreutils-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>Bash, Diffutils, Findutils, Man-DB, and &systemd-udev;</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="coreutils-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>
            <ulink url="https://metacpan.org/pod/Expect">Expect.pm</ulink>
            and
            <ulink url="https://metacpan.org/pod/IO::Tty">IO::Tty</ulink>
          </seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin D-Bus dependency info -->

  <bridgehead renderas="sect2" id="dbus-dep" revision="systemd">D-Bus</bridgehead>

      <segmentedlist id="dbus-depends" revision="systemd">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, Diffutils, Gawk, GCC, Glibc, Grep,
          Make, Pkgconf, Sed, Systemd, and Util-linux</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="dbus-rundeps" revision="systemd">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc and Systemd</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="dbus-testdeps" revision="systemd">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>Several packages in BLFS</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="dbus-before" revision="systemd">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="dbus-optdeps" revision="systemd">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg><ulink url="&blfs-book;x/x7lib.html">Xorg Libraries</ulink></seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin DejaGNU dependency info -->
  <bridgehead renderas="sect2" id="dejagnu-dep">DejaGNU</bridgehead>

      <segmentedlist id="dejagnu-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Coreutils, Diffutils, Expect, GCC, Grep, Make, Sed, and
          Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="dejagnu-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Expect and Bash</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="dejagnu-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="dejagnu-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="dejagnu-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Diffutils dependency info -->
  <bridgehead renderas="sect2" id="diffutils-dep">Diffutils</bridgehead>

      <segmentedlist id="diffutils-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, Gawk, GCC, Gettext, Glibc, Grep,
          Make, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="diffutils-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="diffutils-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>Perl</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="diffutils-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="diffutils-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin E2fsprogs dependency info -->
  <bridgehead renderas="sect2" id="e2fsprogs-dep">E2fsprogs</bridgehead>

      <segmentedlist id="e2fsprogs-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, Diffutils, Gawk, GCC, Glibc, Grep,
          Gzip, Make, Pkgconf, Sed,
          <phrase revision='systemd'>Systemd, </phrase>Texinfo, and
          Util-linux</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="e2fsprogs-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc and Util-linux</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="e2fsprogs-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>Procps-ng and Psmisc</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="e2fsprogs-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="e2fsprogs-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Expat dependency info -->
  <bridgehead renderas="sect2" id="expat-dep">Expat</bridgehead>

      <segmentedlist id="expat-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, Gawk, GCC, Glibc, Grep, Make, and
          Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="expat-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="expat-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="expat-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>Python and XML::Parser</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="expat-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Expect dependency info -->
  <bridgehead renderas="sect2" id="expect-dep">Expect</bridgehead>

      <segmentedlist id="expect-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, Diffutils, GCC, Glibc, Grep, Make,
          Patch, Sed, and Tcl</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="expect-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc and Tcl</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="expect-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="expect-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="expect-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>
            <ulink url="&blfs-book;general/tk.html">Tk</ulink>
          </seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin File dependency info -->
  <bridgehead renderas="sect2" id="file-dep">File</bridgehead>

      <segmentedlist id="file-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Bzip2, Coreutils, Diffutils, Gawk, GCC, Glibc,
          Grep, Make, Sed, Xz, and Zlib</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="file-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc, Bzip2, Xz, and Zlib</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="file-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="file-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="file-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>
            <ulink url="&blfs-book;general/libseccomp.html">libseccomp</ulink>
          </seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Findutils dependency info -->
  <bridgehead renderas="sect2" id="findutils-dep">Findutils</bridgehead>

      <segmentedlist id="findutils-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, GCC, Gettext, Glibc, Grep, Make, Sed,
          and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="findutils-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Bash and Glibc</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="findutils-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>DejaGNU, Diffutils, and Expect</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="findutils-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="findutils-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Flex dependency info -->
  <bridgehead renderas="sect2" id="flex-dep">Flex</bridgehead>

      <segmentedlist id="flex-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, GCC, Gettext, Glibc, Grep, M4, Make,
          Patch, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="flex-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Bash, Glibc, and M4</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="flex-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>Bison and Gawk</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="flex-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>Binutils, IProute2, Kbd, Kmod, and Man-DB</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="flex-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Flit-core dependency info -->
  <bridgehead renderas="sect2" id="flit-core-dep">Flit-Core</bridgehead>

      <segmentedlist id="flit-core-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Python</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="flit-core-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Python</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="flit-core-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="flit-core-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>Wheel</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="flit-core-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>
            <ulink url='&blfs-book;general/python-modules.html#pytest'>pytest</ulink>
            and
            <ulink url='&pypi-home;/testpath'>testpath</ulink>
          </seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Gawk dependency info -->
  <bridgehead renderas="sect2" id="gawk-dep">Gawk</bridgehead>

      <segmentedlist id="gawk-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, GCC, Gettext, Glibc, GMP, Grep, Make,
          MPFR, Patch, Readline, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="gawk-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Bash, Glibc, and Mpfr</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="gawk-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>Diffutils</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="gawk-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="gawk-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>
            <ulink url="&blfs-book;general/libsigsegv.html">libsigsegv</ulink>
          </seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin GCC dependency info -->
  <bridgehead renderas="sect2" id="gcc-dep">GCC</bridgehead>

      <segmentedlist id="gcc-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, Diffutils, Findutils, Gawk, GCC,
          Gettext, Glibc, GMP, Grep, Libxcrypt, M4, Make, MPC, MPFR, Patch,
          Perl, Sed, Tar, Texinfo, and Zstd</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="gcc-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Glibc, Mpc, and Python</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="gcc-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>DejaGNU, Expect, and Shadow</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="gcc-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="gcc-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>
             <ulink url="https://www.gdcproject.org/">GDC</ulink>,
             <ulink url="https://gcc.gnu.org/wiki/GNAT">GNAT</ulink>,
             and
             <ulink url="https://repo.or.cz/isl.git">ISL</ulink>
          </seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin GDBM dependency info -->
  <bridgehead renderas="sect2" id="gdbm">GDBM</bridgehead>

      <segmentedlist id="gdbm-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, Diffutils, GCC, Grep, Make, and
          Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="gdbm-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Bash, Glibc, and Readline</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="gdbm-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="gdbm-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="gdbm-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Gettext dependency info -->
  <bridgehead renderas="sect2" id="gettext-dep">Gettext</bridgehead>

      <segmentedlist id="gettext-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, Gawk, GCC, Glibc, Grep, Make, Ncurses,
          Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="gettext-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Acl, Bash, Gcc, and Glibc</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="gettext-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>Diffutils, Perl, and Tcl</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="gettext-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>Automake and Bison</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="gettext-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Glibc dependency info -->
  <bridgehead renderas="sect2" id="glibc-dep">Glibc</bridgehead>

      <segmentedlist id="glibc-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Bison, Coreutils, Diffutils, Gawk, GCC, Gettext,
          Grep, Gzip, Linux API Headers, Make, Perl, Python, Sed, and
          Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="glibc-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="glibc-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>File</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="glibc-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="glibc-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin GMP dependency info -->
  <bridgehead renderas="sect2" id="gmp-dep">GMP</bridgehead>

      <segmentedlist id="gmp-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, Diffutils, Gawk, GCC, Glibc, Grep, M4,
          Make, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="gmp-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>GCC and Glibc</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="gmp-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="gmp-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>MPFR and GCC</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="gmp-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Gperf dependency info -->
  <bridgehead renderas="sect2" id="gperf-dep">Gperf</bridgehead>

      <segmentedlist id="gperf-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
         <seg>Bash, Binutils, Coreutils, GCC, Glibc, and Make</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="gperf-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>GCC and Glibc</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="gperf-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>Diffutils and Expect</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="gperf-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="gperf-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Grep dependency info -->
  <bridgehead renderas="sect2" id="grep-dep">Grep</bridgehead>

      <segmentedlist id="grep-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, Diffutils, GCC, Gettext, Glibc, Grep,
          Make, Patch, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="grep-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="grep-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>Gawk</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="grep-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>Man-DB</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="grep-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>
            <ulink url="&blfs-book;general/pcre2.html">PCRE2</ulink>
            and
            <ulink url="&blfs-book;general/libsigsegv.html">libsigsegv</ulink>
          </seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Groff dependency info -->
  <bridgehead renderas="sect2" id="groff-dep">Groff</bridgehead>

      <segmentedlist id="groff-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Bison, Coreutils, Gawk, GCC, Glibc, Grep, Make,
          Patch, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="groff-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>GCC, Glibc, and Perl</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="groff-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="groff-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>Man-DB and Perl</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="groff-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>
            <ulink url="&blfs-book;pst/gs.html">ghostscript</ulink>
            and
            <ulink url="&blfs-book;general/uchardet.html">Uchardet</ulink>
          </seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin GRUB dependency info -->
  <bridgehead renderas="sect2" id="grub-dep">GRUB</bridgehead>

      <segmentedlist id="grub-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Bison, Coreutils, Diffutils, GCC, Gettext, Glibc,
          Grep, Make, Ncurses, Sed, Texinfo, and Xz</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="grub-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Bash, GCC, Gettext, Glibc, Xz, and Sed.</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="grub-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="grub-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="grub-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Gzip dependency info -->
  <bridgehead renderas="sect2" id="gzip-dep">Gzip</bridgehead>

      <segmentedlist id="gzip-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, GCC, Glibc, Grep, Make, Sed, and
          Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="gzip-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Bash and Glibc</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="gzip-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>Diffutils and Less</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="gzip-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>Man-DB</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="gzip-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Iana-Etc dependency info -->
  <bridgehead renderas="sect2" id="iana-etc-dep">Iana-Etc</bridgehead>

      <segmentedlist id="iana-etc-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
         <seg>Coreutils</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="iana-etc-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="iana-etc-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="iana-etc-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>Perl</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="iana-etc-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Inetutils dependency info -->
  <bridgehead renderas="sect2" id="inetutils-dep">Inetutils</bridgehead>

      <segmentedlist id="inetutils-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, GCC, Glibc, Grep, Make, Ncurses,
          Patch, Sed, Texinfo, and Zlib</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="inetutils-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>GCC, Glibc, Ncurses, and Readline</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="inetutils-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="inetutils-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>Tar</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="inetutils-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Intltool dependency info -->
  <bridgehead renderas="sect2" id="intltool-dep">Intltool</bridgehead>

      <segmentedlist id="intltool-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Gawk, Glibc, Make, Perl, Sed, and XML::Parser</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="intltool-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Autoconf, Automake, Bash, Glibc, Grep, Perl, and
          Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="intltool-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>Perl</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="intltool-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="intltool-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin IProute2 dependency info -->
  <bridgehead renderas="sect2" id="iproute2-dep">IProute2</bridgehead>

      <segmentedlist id="iproute2-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
         <seg>Bash, Bison, Coreutils, Flex, GCC, Glibc, Make, Libcap, Libelf,
         Linux API Headers, Pkgconf, and Zlib</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="iproute2-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Bash, Coreutils, Glibc, Libcap, Libelf, and Zlib</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="iproute2-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="iproute2-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="iproute2-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>
            <ulink url="&blfs-book;server/db.html">Berkeley DB</ulink>,
            <ulink url="&blfs-book;postlfs/iptables.html">iptables</ulink>,
            <ulink url="&github;/libbpf/libbpf">libbpf</ulink>,
            <ulink url="&blfs-book;basicnet/libmnl.html">libmnl</ulink>, and
            <ulink url="&blfs-book;basicnet/libtirpc.html">libtirpc</ulink>
          </seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Jinja2 dependency info -->
  <bridgehead revision='systemd' renderas="sect2" id="jinja2-dep">Jinja2</bridgehead>

      <segmentedlist id="jinja2-depends" revision='systemd'>
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>MarkupSafe and Python</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="jinja2-rundeps" revision='systemd'>
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>MarkupSafe and Python</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="jinja2-testdeps" revision='systemd'>
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="jinja2-before" revision='systemd'>
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>&systemd-udev;</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="jinja2-optdeps" revision='systemd'>
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Kbd dependency info -->
  <bridgehead renderas="sect2" id="kbd-dep">Kbd</bridgehead>

      <segmentedlist id="kbd-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
         <seg>Bash, Binutils, Bison, Check, Coreutils, Flex, GCC, Gettext,
         Glibc, Gzip, Make, Patch, and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="kbd-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Bash, Coreutils, and Glibc</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="kbd-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="kbd-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="kbd-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Kmod dependency info -->
  <bridgehead renderas="sect2" id="kmod-dep">Kmod</bridgehead>

      <segmentedlist id="kmod-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Bison, Coreutils, Flex, GCC, Gettext, Glibc,
          Gzip, Make, OpenSSL, Pkgconf, Sed, Xz, and Zlib</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="kmod-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc, Xz, and Zlib</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="kmod-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="kmod-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>&systemd-udev;</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="kmod-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Less dependency info -->
  <bridgehead renderas="sect2" id="less-dep">Less</bridgehead>

      <segmentedlist id="less-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, Diffutils, GCC, Glibc, Grep, Make,
          Ncurses, and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="less-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc and Ncurses</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="less-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="less-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>Gzip</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="less-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>
            <ulink url="&blfs-book;general/pcre2.html">PCRE2</ulink> or
            <ulink url="&blfs-book;general/pcre.html">PCRE</ulink>
          </seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Libcap dependency info -->
  <bridgehead renderas="sect2" id="libcap-dep">Libcap</bridgehead>

      <segmentedlist id="libcap-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Attr, Bash, Binutils, Coreutils, GCC, Glibc, Perl, Make, and
          Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="libcap-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="libcap-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="libcap-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>IProute2 and Shadow</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="libcap-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>
            <ulink url="&blfs-book;postlfs/linux-pam.html">Linux-PAM</ulink>
          </seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Libelf dependency info -->
  <bridgehead renderas="sect2" id="libelf-dep">Libelf</bridgehead>

      <segmentedlist id="libelf-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Bzip2, Coreutils, GCC, Glibc, Make, Xz,
          Zlib, and Zstd</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="libelf-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Bzip2, Glibc, Xz, Zlib, and Zstd</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="libelf-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="libelf-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>IProute2 and Linux</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="libelf-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Libffi dependency info -->
  <bridgehead renderas="sect2" id="libffi-dep">Libffi</bridgehead>

      <segmentedlist id="libffi-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
         <seg>Bash, Binutils, Coreutils, GCC, Glibc, Make,
         and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="libffi-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="libffi-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>DejaGnu</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="libffi-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>Python</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="libffi-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Libpipeline dependency info -->
  <bridgehead renderas="sect2" id="libpipeline-dep">Libpipeline</bridgehead>

      <segmentedlist id="libpipeline-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, Diffutils, Gawk, GCC, Glibc, Grep,
          Make, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="libpipeline-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="libpipeline-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>Check and Pkgconf</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="libpipeline-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>Man-DB</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="libpipeline-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Libtool dependency info -->
  <bridgehead renderas="sect2" id="libtool-dep">Libtool</bridgehead>

      <segmentedlist id="libtool-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, Diffutils, Gawk, GCC, Glibc, Grep,
          Make, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="libtool-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Autoconf, Automake, Bash, Binutils, Coreutils, File, GCC, Glibc,
          Grep, Make, and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="libtool-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>Autoconf, Automake, and Findutils</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="libtool-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="libtool-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Libxcrypt dependency info -->
  <bridgehead renderas="sect2" id="libxcrypt-dep">Libxcrypt</bridgehead>

      <segmentedlist id="libxcrypt-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, Diffutils, Gawk, GCC, Glibc, Grep,
          Make, Perl, and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="libxcrypt-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="libxcrypt-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="libxcrypt-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>GCC, Perl, Python, Shadow, and &systemd-udev;</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="libxcrypt-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Linux dependency info -->
  <bridgehead renderas="sect2" id="linux-dep">Linux</bridgehead>

      <segmentedlist id="linux-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Bc, Binutils, Coreutils, Diffutils, Findutils, GCC, Glibc,
          Grep, Gzip, Kmod, Libelf, Make, Ncurses, OpenSSL, Perl, and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="linux-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="linux-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="linux-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="linux-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>
            <ulink url="&blfs-book;general/cpio.html">cpio</ulink> and
            <ulink url="&blfs-book;general/llvm.html">LLVM</ulink>
            (with Clang)
          </seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Linux dependency info -->
  <bridgehead renderas="sect2" id="linux-api-headers-dep">Linux API Headers</bridgehead>

      <segmentedlist id="linux-api-headers-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, Findutils, GCC, Glibc, Grep, Gzip,
          Make, Perl, and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="linux-api-headers-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="linux-api-headers-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="linux-api-headers-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="linux-api-headers-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin M4 dependency info -->
  <bridgehead renderas="sect2" id="m4-dep">M4</bridgehead>

      <segmentedlist id="m4-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, GCC, Glibc, Grep, Make, Sed, and
          Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="m4-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Bash and Glibc</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="m4-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>Diffutils</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="m4-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>Autoconf and Bison</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="m4-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>
            <ulink url="&blfs-book;general/libsigsegv.html">libsigsegv</ulink>
          </seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Make dependency info -->
  <bridgehead renderas="sect2" id="make-dep">Make</bridgehead>

      <segmentedlist id="make-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, GCC, Gettext, Glibc, Grep, Make, Sed,
          and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="make-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="make-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>Perl and Procps-ng</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="make-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="make-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>
            <ulink url="&blfs-book;general/guile.html">Guile</ulink>
          </seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Man-DB dependency info -->
  <bridgehead renderas="sect2" id="man-db-dep">Man-DB</bridgehead>

      <segmentedlist id="man-db-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Bzip2, Coreutils, Flex, GCC, GDBM, Gettext,
          Glibc, Grep, Groff, Gzip, Less, Libpipeline, Make, Pkgconf, Sed,
          <phrase revision='systemd'>Systemd, </phrase>and Xz</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="man-db-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Bash, GDBM, Groff, Glibc, Gzip, Less, Libpipeline, and Zlib</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="man-db-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>Util-linux</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="man-db-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="man-db-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>
            <ulink url="&blfs-book;general/libseccomp.html">libseccomp</ulink> and
            <ulink url="https://po4a.org/index.php.en">po4a</ulink>
          </seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Man-Pages dependency info -->
  <bridgehead renderas="sect2" id="man-pages-dep">Man-Pages</bridgehead>

      <segmentedlist id="man-pages-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
         <seg>Bash, Coreutils, and Make</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="man-pages-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="man-pages-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="man-pages-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="man-pages-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin MarkupSafe dependency info -->
  <bridgehead renderas="sect2" id="markupsafe-dep" revision='systemd'>MarkupSafe</bridgehead>

      <segmentedlist id="markupsafe-depends" revision='systemd'>
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Python</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="markupsafe-rundeps" revision='systemd'>
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Python</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="markupsafe-testdeps" revision='systemd'>
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="markupsafe-before" revision='systemd'>
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>Jinja2</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="markupsafe-optdeps" revision='systemd'>
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Meson dependency info -->
  <bridgehead renderas="sect2" id="meson-dep">Meson</bridgehead>

      <segmentedlist id="meson-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Ninja and Python</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="meson-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Python</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="meson-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="meson-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>&systemd-udev;</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="meson-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin MPC dependency info -->
  <bridgehead renderas="sect2" id="mpc-dep">MPC</bridgehead>

      <segmentedlist id="mpc-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, Diffutils, Gawk, GCC, Glibc, Grep,
          GMP, Make, MPFR, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="mpc-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc, GMP, and MPFR</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="mpc-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="mpc-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>GCC</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="mpc-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin MPFR dependency info -->
  <bridgehead renderas="sect2" id="mpfr-dep">MPFR</bridgehead>

      <segmentedlist id="mpfr-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, Diffutils, Gawk, GCC, Glibc, Grep,
          GMP, Make, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="mpfr-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc and GMP</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="mpfr-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="mpfr-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>Gawk and GCC</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="mpfr-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Ncurses dependency info -->
  <bridgehead renderas="sect2" id="ncurses-dep">Ncurses</bridgehead>

      <segmentedlist id="ncurses-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, Diffutils, Gawk, GCC, Glibc, Grep,
          Make, Patch, and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="ncurses-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="ncurses-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="ncurses-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>Bash, GRUB, Inetutils, Less, Procps-ng, Psmisc, Readline,
          Texinfo, Util-linux, and Vim</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="ncurses-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Ninja dependency info -->
  <bridgehead renderas="sect2" id="ninja-dep">Ninja</bridgehead>

      <segmentedlist id="ninja-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Binutils, Coreutils, GCC, and Python</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="ninja-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>GCC and Glibc</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="ninja-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="ninja-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>Meson</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="ninja-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>
            <ulink url="&blfs-book;general/asciidoc.html">Asciidoc</ulink>,
            <ulink url="&blfs-book;general/doxygen.html">Doxygen</ulink>,
            <ulink url="&blfs-book;postlfs/emacs.html">Emacs</ulink>, and
            <ulink url="https://re2c.org/">re2c</ulink>
          </seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin OpenSSL dependency info -->
  <bridgehead renderas="sect2" id="openssl-dep">OpenSSL</bridgehead>

      <segmentedlist id="openssl-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Binutils, Coreutils, GCC, Make, and Perl</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="openssl-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc and Perl</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="openssl-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="openssl-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>Coreutils, Kmod, Linux, and &systemd-udev;</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="openssl-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Patch dependency info -->
  <bridgehead renderas="sect2" id="patch-dep">Patch</bridgehead>

      <segmentedlist id="patch-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, GCC, Glibc, Grep, Make, and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="patch-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="patch-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>Diffutils</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="patch-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="patch-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>
            <ulink url="&blfs-book;postlfs/ed.html">Ed</ulink>
          </seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Perl dependency info -->
  <bridgehead renderas="sect2" id="perl-dep">Perl</bridgehead>

      <segmentedlist id="perl-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, Gawk, GCC, GDBM, Glibc, Grep, Groff,
          Libxcrypt, Make, Sed, and Zlib</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="perl-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>GDBM, Glibc, and Libxcrypt</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="perl-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>Iana-Etc, Less. and Procps-ng</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="perl-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>Autoconf</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="perl-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>
            <ulink url="&blfs-book;server/db.html">Berkeley DB</ulink>
          </seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Pkg-config dependency info -->
  <bridgehead renderas="sect2" id="pkgconf-dep">Pkgconf</bridgehead>

      <segmentedlist id="pkgconf-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, Gawk, GCC, Glibc, Grep, Make,
          and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="pkgconf-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="pkgconf-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="pkgconf-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg><phrase revision='systemd'>D-Bus, </phrase>E2fsprogs,
          IProute2, Kmod, Man-DB, Procps-ng, Python,
          &systemd-udev;, and Util-linux</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="pkgconf-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Procps dependency info -->
  <bridgehead renderas="sect2" id="procps-dep">Procps-ng</bridgehead>

      <segmentedlist id="procps-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, GCC, Glibc, Make, Ncurses,
          <phrase revision='sysv'>and </phrase>Pkgconf<phrase
          revision='systemd'>, and Systemd</phrase></seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="procps-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="procps-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>DejaGNU</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="procps-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="procps-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>
            <phrase revision='systemd'>None</phrase>
            <phrase revision='sysv'>
              <ulink url='&blfs-book;general/elogind.html'>elogind</ulink>
            </phrase>
          </seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Psmisc dependency info -->
  <bridgehead renderas="sect2" id="psmisc-dep">Psmisc</bridgehead>

      <segmentedlist id="psmisc-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, GCC, Gettext, Glibc, Grep, Make,
          Ncurses, and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="psmisc-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc and Ncurses</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="psmisc-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="psmisc-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="psmisc-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Python dependency info -->
  <bridgehead renderas="sect2" id="python-dep">Python</bridgehead>

      <segmentedlist id="python-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, Expat, GCC, Gdbm, Gettext, Glibc,
          Grep, Libffi, Libxcrypt, Make, Ncurses, OpenSSL, Pkgconf, Sed, and
          Util-linux</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="python-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Bzip2, Expat, Gdbm, Glibc, Libffi, Libxcrypt, Ncurses,
          OpenSSL, and Zlib</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="python-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>GDB and Valgrind</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="python-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>Ninja</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="python-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>
            <ulink url="&blfs-book;server/db.html">Berkeley DB</ulink>,
            <ulink url="&blfs-book;basicnet/libnsl.html">libnsl</ulink>,
            <ulink url="&blfs-book;server/sqlite.html">SQLite</ulink>, and
            <ulink url="&blfs-book;general/tk.html">Tk</ulink>
          </seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Readline dependency info -->
  <bridgehead renderas="sect2" id="readline-dep">Readline</bridgehead>

      <segmentedlist id="readline-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, Gawk, GCC, Glibc, Grep, Make, Ncurses,
          Patch, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="readline-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc and Ncurses</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="readline-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="readline-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>Bash, Bc, and Gawk</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="readline-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Sed dependency info -->
  <bridgehead renderas="sect2" id="sed-dep">Sed</bridgehead>

      <segmentedlist id="sed-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, GCC, Gettext, Glibc, Grep, Make, Sed,
          and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="sed-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Acl, Attr, and Glibc</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="sed-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>Diffutils and Gawk</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="sed-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>E2fsprogs, File, Libtool, and Shadow</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="sed-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Shadow dependency info -->
  <bridgehead renderas="sect2" id="shadow-dep">Shadow</bridgehead>

      <segmentedlist id="shadow-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Acl, Attr, Bash, Binutils, Coreutils, Diffutils, Findutils, Gawk,
          GCC, Gettext, Glibc, Grep, Libcap, Libxcrypt, Make, and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="shadow-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc and Libxcrypt</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="shadow-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="shadow-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>Coreutils</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="shadow-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>
            <ulink url="&blfs-book;postlfs/cracklib.html">CrackLib</ulink>
            and
            <ulink url="&blfs-book;postlfs/linux-pam.html">Linux-PAM</ulink>
          </seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Sysklogd dependency info -->
  <bridgehead renderas="sect2" id="sysklogd-dep" revision="sysv">Sysklogd</bridgehead>

      <segmentedlist id="sysklogd-depends" revision="sysv">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Binutils, Coreutils, GCC, Glibc, Make, and Patch</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="sysklogd-rundeps" revision="sysv">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="sysklogd-testdeps" revision="sysv">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="sysklogd-before" revision="sysv">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="sysklogd-optdeps" revision="sysv">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin systemd dependency info -->
  <bridgehead renderas="sect2" id="systemd-dep" revision='systemd'>Systemd</bridgehead>

      <segmentedlist id="systemd-depends" revision='systemd'>
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
         <seg>Acl, Bash, Binutils, Coreutils, Diffutils, Gawk,
         GCC, Glibc, Gperf, Grep, Jinja2, Libcap, Libxcrypt, Meson,
         OpenSSL, Pkgconf, Sed, Util-linux, and Zstd</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="systemd-rundeps" revision='systemd'>
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Acl, Glibc, Libcap, Libxcrypt, OpenSSL, Util-linux, Xz,
          Zlib, and Zstd</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="systemd-testdeps" revision='systemd'>
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="systemd-before" revision='systemd'>
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>D-Bus, E2fsprogs, Man-DB, Procps-ng, and Util-linux</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="systemd-optdeps" revision='systemd'>
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>
            <ulink url="https://www.apparmor.net/">AppArmor</ulink>,
            <ulink url="&github;/linux-audit/audit-userspace">
              audit-userspace</ulink>,
            <ulink url="&github;/scop/bash-completion">
              bash-completion</ulink>,
            <ulink
              url="&blfs-book;postlfs/btrfs-progs.html">btrfs-progs</ulink>,
            <ulink url="&blfs-book;basicnet/curl.html">cURL</ulink>,
            <ulink url="&blfs-book;postlfs/cryptsetup.html">cryptsetup</ulink>,
            <ulink url="&blfs-book;pst/docbook.html">docbook-xml</ulink>,
            <ulink
              url="&blfs-book;pst/docbook-xsl.html">docbook-xsl-nons</ulink>,
            <ulink url="&blfs-book;general/git.html">Git</ulink>,
            <ulink url="&blfs-book;postlfs/gnutls.html">GnuTLS</ulink>,
            <ulink url="&blfs-book;postlfs/iptables.html">iptables</ulink>,
            <ulink url='https://jekyllrb.com/'>jekyll</ulink>,
            <ulink url="https://www.kernel.org/pub/linux/utils/kernel/kexec/">
              kexec-tools</ulink>,
            <ulink url='&github;/libbpf/libbpf'>libbpf</ulink>,
            <ulink url="https://sourceware.org/elfutils/">libdw</ulink>,
            <ulink
              url="https://developers.yubico.com/libfido2/">libfido2</ulink>,
            <ulink url="&blfs-book;general/libgcrypt.html">libgcrypt</ulink>,
            <ulink url="&blfs-book;general/libidn2.html">libidn2</ulink>,
            <ulink url="https://www.gnu.org/software/libmicrohttpd/">
              libmicrohttpd</ulink>,
            <ulink
              url="&blfs-book;postlfs/libpwquality.html">libpwquality</ulink>,
            <ulink url="&blfs-book;general/libseccomp.html">libseccomp</ulink>,
            <ulink
              url="&blfs-book;general/libxkbcommon.html">libxkbcommon</ulink>,
            <ulink url="&blfs-book;general/libxslt.html">libxslt</ulink>,
            <ulink url="&blfs-book;postlfs/linux-pam.html">Linux-PAM</ulink>,
            <ulink
              url="&blfs-book;general/python-modules.html#lxml">lxml</ulink>,
            <ulink url="https://lz4.github.io/lz4/">LZ4</ulink>,
            <ulink url="&blfs-book;postlfs/make-ca.html">make-ca</ulink>,
            <ulink url="&blfs-book;postlfs/p11-kit.html">p11-kit</ulink>,
            <ulink url="&blfs-book;general/pcre2.html">PCRE2</ulink>,
            <ulink url="&blfs-book;postlfs/polkit.html">Polkit</ulink>,
            <ulink url='&pypi-home;/pyelftools'>pyelftools</ulink>,
            <ulink url="&blfs-book;postlfs/qemu.html">qemu</ulink>,
            <ulink url="&blfs-book;general/qrencode.html">qrencode</ulink>,
            <ulink url="https://sourceforge.net/projects/linuxquota/"
              >quota-tools</ulink>,
            <ulink url="https://rpm.org">rpm</ulink>,
            <ulink url="&blfs-book;basicnet/rsync.html">rsync</ulink>,
            <ulink url="&github;/SELinuxProject/selinux">
              SELinux</ulink>,
            <ulink url="&blfs-book;general/python-modules.html#sphinx">
              Sphinx</ulink>,
            <ulink url="https://sourceware.org/systemtap/">
              systemtap</ulink>,
            <ulink url="https://tpm2-tss.readthedocs.io/en/latest/">
              tpm2-tss</ulink>,
            <ulink url="&blfs-book;general/valgrind.html">Valgrind</ulink>,
            <ulink url="https://xenproject.org">Xen</ulink>,
            and
            <ulink url="&blfs-book;postlfs/zsh.html">zsh</ulink>
          </seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Sysvinit dependency info -->
  <bridgehead renderas="sect2" id="sysvinit-dep" revision='sysv'>Sysvinit</bridgehead>

      <segmentedlist id="sysvinit-depends" revision='sysv'>
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Binutils, Coreutils, GCC, Glibc, Make, and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="sysvinit-rundeps" revision='sysv'>
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="sysvinit-testdeps" revision='sysv'>
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="sysvinit-before" revision='sysv'>
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="sysvinit-optdeps" revision='sysv'>
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Tar dependency info -->
  <bridgehead renderas="sect2" id="tar-dep">Tar</bridgehead>

      <segmentedlist id="tar-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Acl, Attr, Bash, Binutils, Bison, Coreutils, GCC, Gettext, Glibc,
          Grep, Inetutils, Make, Sed, and Texinfo</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="tar-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Acl, Attr, Bzip2, Glibc, Gzip, and Xz</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="tar-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>Autoconf, Diffutils, Findutils, Gawk, and
          Gzip</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="tar-befors">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="tar-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Tcl dependency info -->
  <bridgehead renderas="sect2" id="tcl-dep">Tcl</bridgehead>

      <segmentedlist id="tcl-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, Diffutils, GCC, Glibc, Grep, Make, and
          Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="tcl-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc and Zlib</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="tcl-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="tcl-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="tcl-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Texinfo dependency info -->
  <bridgehead renderas="sect2" id="texinfo-dep">Texinfo</bridgehead>

      <segmentedlist id="texinfo-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, GCC, Gettext, Glibc, Grep, Make,
          Ncurses, Patch, and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="texinfo-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc and Ncurses</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="texinfo-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="texinfo-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="texinfo-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Udev dependency info -->
  <bridgehead renderas="sect2" id="udev-dep" revision="sysv">Udev</bridgehead>

      <segmentedlist id="udev-depends" revision="sysv">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
         <seg>Acl, Bash, Binutils, Coreutils, Diffutils, Gawk,
         GCC, Glibc, Gperf, Grep, Jinja2, Libcap, Libxcrypt, Meson,
         OpenSSL, Pkgconf, Sed, Util-linux, and Zstd</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="udev-rundeps" revision="sysv">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Acl, Glibc, Libcap, OpenSSL, and Util-linux</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="udev-testdeps" revision="sysv">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="udev-before" revision="sysv">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>Util-linux</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="udev-optdeps" revision="sysv">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Util-linux dependency info -->
  <bridgehead renderas="sect2" id="util-linux-dep">Util-linux</bridgehead>

      <segmentedlist id="util-linux-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, Diffutils, File, Findutils, Gawk,
          GCC, Gettext, Glibc, Grep, Make, Ncurses, Pkgconf, Sed,
          &systemd-udev;, and Zlib</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="util-linux-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc, Ncurses, Readline, &systemd-udev;, and Zlib</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="util-linux-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="util-linux-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="util-linux-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>
            <ulink
              url="https://people.redhat.com/sgrubb/libcap-ng/">Libcap-NG</ulink>,
            <ulink url="&github;/openSUSE/libeconf">libeconf</ulink>,
            <ulink url="https://pagure.io/libuser/">libuser</ulink>,
            <ulink url="&github;/altlinux/libutempter">libutempter</ulink>,
            <ulink
              url="&blfs-book;postlfs/linux-pam.html">Linux-PAM</ulink>,
            <ulink
              url="&blfs-book;postlfs/smartmontools.html">smartmontools</ulink>, and
            <ulink url="&blfs-book;general/slang.html">slang</ulink>
          </seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Vim dependency info -->
  <bridgehead renderas="sect2" id="vim-dep">Vim</bridgehead>

      <segmentedlist id="vim-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Acl, Attr, Bash, Binutils, Coreutils, Diffutils, GCC, Glibc,
          Grep, Make, Ncurses, and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="vim-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Acl, Attr, Glibc, Python, Ncurses, and Tcl</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="vim-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="vim-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="vim-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>
            <ulink url="&blfs-book;x/installing.html">Xorg</ulink>,
            <ulink url="&blfs-book;x/gtk2.html">GTK+2</ulink>,
            <ulink url="https://lesstif.sourceforge.net/">LessTif</ulink>,
            <ulink url="&blfs-book;general/ruby.html">Ruby</ulink>, and
            <ulink url="&blfs-book;general/gpm.html">GPM</ulink>
          </seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Wheel dependency info -->
  <bridgehead renderas="sect2" id="wheel-dep">wheel</bridgehead>

      <segmentedlist id="wheel-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Python and Flit-core</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="wheel-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Python</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="wheel-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>No test suite available</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="wheel-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>
            <phrase revision='sysv'>None</phrase>
            <phrase revision='systemd'>Jinja2</phrase>
          </seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="wheel-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin XML::Parser dependency info -->
  <bridgehead renderas="sect2" id="xml-parser-dep">XML::Parser</bridgehead>

      <segmentedlist id="xml-parser-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, Expat, GCC, Glibc, Make, and
          Perl</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="xml-parser-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Expat, Glibc, and Perl</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="xml-parser-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>Perl</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="xml-parser-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>Intltool</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="xml-parser-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Xz-utils dependency info -->
  <bridgehead renderas="sect2" id="xz-dep">Xz</bridgehead>

      <segmentedlist id="xz-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, Diffutils, GCC, Glibc, and Make</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="xz-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="xz-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="xz-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>File, GRUB, Kmod, Libelf, Man-DB, and &systemd-udev;</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="xz-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Zlib dependency info -->
  <bridgehead renderas="sect2" id="zlib-dep">Zlib</bridgehead>

      <segmentedlist id="zlib-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Bash, Binutils, Coreutils, GCC, Glibc, Make, and Sed</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="zlib-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="zlib-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="zlib-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>File, Kmod, Libelf, Perl, and Util-linux</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="zlib-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

<!-- Begin Zstd dependency info -->
  <bridgehead renderas="sect2" id="zstd-dep">Zstd</bridgehead>

      <segmentedlist id="zstd-depends">
        <segtitle>&dependencies;</segtitle>
        <seglistitem>
          <seg>Binutils, Coreutils, GCC, Glibc, Gzip, Make, Xz, and Zlib</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="zstd-rundeps">
        <segtitle>&runtime;</segtitle>
        <seglistitem>
          <seg>Glibc</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="zstd-testdeps">
        <segtitle>&testsuites;</segtitle>
        <seglistitem>
          <seg>None</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="zstd-before">
        <segtitle>&before;</segtitle>
        <seglistitem>
          <seg>GCC, Libelf, and &systemd-udev;</seg>
        </seglistitem>
      </segmentedlist>

      <segmentedlist id="zstd-optdeps">
        <segtitle>&external;</segtitle>
        <seglistitem>
          <seg>
            <ulink url="https://lz4.github.io/lz4/">LZ4</ulink>
          </seg>
        </seglistitem>
      </segmentedlist>

</appendix>