Moving Mounting proc to before Chroot, dropping Util-linux, adding an arch script to Perl.

git-svn-id: http://svn.linuxfromscratch.org/LFS/trunk/BOOK@3220 4aa44e1e-78dd-0310-a6d2-fbcd4c07a689

chapter01/changelog.xml

@@ -62,6 +62,10 @@
 </itemizedlist>
 </listitem>
 
+<listitem><para>February 4th, 2004 [alex]: Chapters 5 + 6 - Moved the Mounting
+of proc and devpts to before Chrooting, dropped Util-linux from the tools, and
+added a little arch script for Perl.</para></listitem>
+
 <listitem><para>February 1st, 2004 [gerard]: LFS-5.1-PRE1
 release.</para></listitem>
 

chapter05/chapter05.xml

@@ -568,7 +568,6 @@ can now be used to build the rest of the temporary tools.</para>
 &c5-tar;
 &c5-texinfo;
 &c5-bash;
-&c5-utillinux;
 &c5-perl;
 
 

chapter05/gcc-pass2.xml

@@ -128,7 +128,7 @@ through to completion and not stop at the first failure. The GCC test suite is
 very comprehensive and is almost guaranteed to generate a few failures. To get
 a summary of the test suite results, run this:</para>
  
-<screen><userinput>../&gcc-dir;/contrib/test_summary | more</userinput></screen>
+<screen><userinput>../&gcc-dir;/contrib/test_summary | grep -A7 Summ</userinput></screen>
 
 <para>You can compare your results to those posted to the gcc-testresults
 mailing list for similar configurations to your own. For an example of how

chapter05/perl.xml

@@ -17,7 +17,13 @@
 
 <screen><userinput>patch -Np1 -i ../&perl-libc-patch;</userinput></screen>
 
-<para>Now prepare Perl for compilation (make sure to get the 'IO Fcntl'
+<para>Perl insists on using the <command>arch</command> program to find out
+the machine type. Create a little script to mimick this command:</para>
+
+<screen><userinput>echo "uname -m" &gt; /tools/bin/arch
+chmod 755 /tools/bin/arch</userinput></screen>
+
+<para>Now prepare Perl for compilation (make sure you get the 'IO Fcntl'
 right, they are all letters):</para>
 
 <screen><userinput>./configure.gnu --prefix=/tools -Dstatic_ext='IO Fcntl'</userinput></screen>

chapter06/chapter06.xml

@@ -60,23 +60,22 @@ with a series of short descriptions of these.</para>
 
 </sect1>
 
+&c6-mountproc;
 
 <sect1 id="ch-system-chroot">
 <title>Entering the chroot environment</title>
 <?dbhtml filename="chroot.html" dir="chapter06"?>
 
-<para>It is time to enter the chroot environment in order to begin installing
+<para>It is time to enter the chroot environment in order to begin building
-the packages we need. Before you can chroot, however, you need to become
+and installing your final LFS system.</para>
-<emphasis>root</emphasis>, since only <emphasis>root</emphasis>
-can execute the <command>chroot</command> command.</para>
 
-<para>Just like earlier, ensure the LFS environment variable is set up properly
+<para>First check, just like earlier, that the LFS environment variable is set
-by running <userinput>echo $LFS</userinput> and ensuring it shows the path to
+up properly by running <userinput>echo $LFS</userinput> and making sure it
-your LFS partition's mount point, which is
+shows the path to your LFS partition's mount point, which is
 <filename class="directory">/mnt/lfs</filename> if you followed our example.</para>
 
-<para>Become <emphasis>root</emphasis> and run the following command
+<para>As <emphasis>root</emphasis>, run the following command to enter the
-to enter the chroot environment:</para>
+chroot environment:</para>
 
 <screen><userinput>chroot $LFS /tools/bin/env -i \
 &nbsp;&nbsp;&nbsp;&nbsp;HOME=/root TERM=$TERM PS1='\u:\w\$ ' \
@@ -108,12 +107,12 @@ is switched off by passing the <emphasis>+h</emphasis> option to
 <para>You have to make sure all the commands in the rest of this chapter and
 in the following chapters are run from within the chroot environment.
 If you ever leave this environment for any reason (rebooting for example),
-you must remember to again enter chroot and mount the proc and devpts
+you must remember to first mount the proc and devpts file systems (discussed
-file systems (discussed later) before continuing with the installations.</para>
+in the previous section) <emphasis>and</emphasis> enter chroot again before
+continuing with the installations.</para>
 
-<para>Note that the bash prompt will say "I have no name!" This is
+<para>Note that the bash prompt will say "I have no name!" This is normal, as
-normal, as the <filename>/etc/passwd</filename> file has not been
+the <filename>/etc/passwd</filename> file has not been created yet.</para>
-created yet.</para>
 
 </sect1>
 
@@ -209,9 +208,6 @@ isn't precise, so we created here the directories that we think are needed.</par
 </sect1>
 
 
-&c6-mountproc;
-
-
 <sect1 id="ch-system-createfiles">
 <title>Creating essential symlinks</title>
 <?dbhtml filename="createfiles.html" dir="chapter06"?>

chapter06/mountproc.xml

@@ -6,29 +6,19 @@
 <emphasis>proc</emphasis> and <emphasis>devpts</emphasis> file systems must be
 available within the chroot environment. Since kernel version 2.4 a file system
 can be mounted as many times and in as many places as you like, thus it's not a
-problem that these file systems are already mounted on your host system --
+problem that these file systems are already mounted on your host system,
 especially so because they are virtual file systems.</para>
 
+<para>First you need to become <emphasis>root</emphasis>, since probably only
+<emphasis>root</emphasis> can mount these file systems.</para>
+
 <para>The <emphasis>proc</emphasis> file system is the process information
 pseudo file system through which the kernel provides information about the
-status of the system.</para>
+status of the system. Mount it on <filename class="directory">/proc</filename>
-
+with:</para>
-<para>The proc file system is mounted on
-<filename class="directory">/proc</filename> by running the following
-command:</para>
 
 <screen><userinput>mount proc /proc -t proc</userinput></screen>
 
-<para>You might get warning messages from the mount command, such as
-these:</para>
-
-<blockquote><screen>warning: can't open /etc/fstab: No such file or directory
-not enough memory</screen></blockquote>
-
-<para>Ignore these, they're just due to the fact that the system
-isn't installed completely yet and some files are missing. The mount itself
-will be successful and that's all we care about at this point.</para>
-
 <para>The <emphasis>devpts</emphasis> file system was mentioned earlier and is
 now the most common way for pseudo terminals (PTYs) to be implemented.</para>
 
@@ -54,8 +44,8 @@ environment. We'll cover this shortly in the aforementioned
 <xref linkend="ch-system-MAKEDEV"/> section.</para>
 
 <para>Remember, if for any reason you stop working on your LFS, and start again
-later, it's important to check that these file systems are still mounted inside
+later, it's important to check that these file systems are mounted again before
-the chroot environment, otherwise problems are likely to occur.</para>
+entering the chroot environment, otherwise some problems could occur.</para>
 
 </sect1>