Merge remote-tracking branch 'origin/trunk' into xry111/arm64

chapter01/changelog.xml

@@ -39,6 +39,54 @@
     <listitem revision="sysv"> or <listitem revision="systemd"> as
     appropriate for the entry or if needed the entire day's listitem.
     -->
+    <listitem>
+      <para>2022-12-01</para>
+      <itemizedlist>
+        <listitem>
+          <para>[bdubbs] - Update to linux-6.0.11 (Security update). Fixes
+          <ulink url="&lfs-ticket-root;5175">#5175</ulink>.</para>
+        </listitem>
+      </itemizedlist>
+    </listitem>
+
+    <listitem>
+      <para>2022-12-01</para>
+      <itemizedlist>
+        <listitem>
+          <para>[bdubbs] - Update to iana-etc-20221122. Addresses
+          <ulink url="&lfs-ticket-root;5006">#5006</ulink>.</para>
+        </listitem>
+        <listitem>
+          <para>[bdubbs] - Update to xz-5.2.9. Fixes
+          <ulink url="&lfs-ticket-root;5174">#5174</ulink>.</para>
+        </listitem>
+        <listitem>
+          <para>[bdubbs] - Update to tzdata-2022g. Fixes
+          <ulink url="&lfs-ticket-root;5172">#5172</ulink>.</para>
+        </listitem>
+        <listitem>
+          <para>[bdubbs] - Update to texinfo-7.0.1. Fixes
+          <ulink url="&lfs-ticket-root;5173">#5173</ulink>.</para>
+        </listitem>
+        <listitem>
+          <para>[bdubbs] - Update to tcl-8.6.13. Fixes
+          <ulink url="&lfs-ticket-root;5170">#5170</ulink>.</para>
+        </listitem>
+        <listitem>
+          <para>[bdubbs] - Update to meson-0.64.1. Fixes
+          <ulink url="&lfs-ticket-root;5169">#5169</ulink>.</para>
+        </listitem>
+        <listitem>
+          <para>[bdubbs] - Update to linux-6.0.10. Fixes
+          <ulink url="&lfs-ticket-root;5171">#5171</ulink>.</para>
+        </listitem>
+        <listitem>
+          <para>[bdubbs] - Update to gawk-5.2.1. Fixes
+          <ulink url="&lfs-ticket-root;5168">#5168</ulink>.</para>
+        </listitem>
+      </itemizedlist>
+    </listitem>
+
     <listitem>
       <para>2022-11-22</para>
       <itemizedlist>

chapter01/whatsnew.xml

@@ -247,9 +247,9 @@
     <!--<listitem>
       <para>Tar-&tar-version;</para>
     </listitem>-->
-    <!--<listitem>
+    <listitem>
       <para>Tcl-&tcl-version;</para>
-    </listitem>-->
+    </listitem>
    <listitem>
       <para>Texinfo-&texinfo-version;</para>
     </listitem>

chapter04/creatingminlayout.xml

@@ -8,7 +8,7 @@
 <sect1 id="ch-tools-creatingminlayout">
   <?dbhtml filename="creatingminlayout.html"?>
 
-  <title>Creating a limited directory layout in LFS filesystem</title>
+  <title>Creating a Limited Directory Layout in the LFS Filesystem</title>
 
   <para>In this section, we begin populating the LFS filesystem with the
   pieces that will constitute the final Linux system. The first step is to
@@ -35,4 +35,16 @@ done</userinput></screen>
 
 <screen><userinput>mkdir -pv $LFS/tools</userinput></screen>
 
+  <note>
+    <para>
+      The LFS editors have deliberately decided not to use a
+      <filename class="directory">/usr/lib64</filename> directory.  Several
+      steps are taken to be sure the toolchain will not use it. If for any
+      reason this directory appears (either because you made an error in
+      following the instructions, or because you installed a binary package that
+      created it after finishing LFS), it may break your system.
+      You should always be sure this directory does not exist.
+    </para>
+  </note>
+
 </sect1>

chapter05/gcc-pass1.xml

@@ -160,15 +160,15 @@ cd       build</userinput></screen>
       </varlistentry>
 
       <varlistentry>
-        <term><parameter>--disable-decimal-float, --disable-threads,
+        <term><parameter>--disable-threads,
-              --disable-libatomic, --disable-libgomp,
+        --disable-libatomic, --disable-libgomp,
         --disable-libquadmath, --disable-libssp, --disable-libvtv,
         --disable-libstdcxx</parameter></term>
         <listitem>
-          <para>These switches disable support for the decimal floating point
+          <para>These switches disable support for
-          extension, threading, libatomic, libgomp, libquadmath, libssp,
+          threading, libatomic, libgomp, libquadmath, libssp,
           libvtv, and the C++ standard library respectively. These features
-          will fail to compile when building a cross-compiler and are not
+          may fail to compile when building a cross-compiler and are not
           necessary for the task of cross-compiling the temporary libc.</para>
         </listitem>
       </varlistentry>

chapter07/creatingdirs.xml

@@ -68,6 +68,17 @@ install -dv -m 1777 /tmp /var/tmp</userinput></screen>
     directories that are really necessary. However, feel free to create more
     directories, if you wish.  </para>
 
+  <warning>
+    <para>
+      The FHS does not mandate the existence of the directory
+      <filename class="directory">/usr/lib64</filename>, and the LFS editors
+      have decided not to use it. For the instructions in LFS and BLFS to work correctly,
+      it is imperative that this directory be non-existent. From time to time you should
+      verify that it does not exist, because it is easy to create it
+      inadvertently, and this will probably break your system.
+    </para>
+  </warning>
+
   </sect2>
 
 </sect1>

chapter08/bash.xml

@@ -23,7 +23,7 @@
   <sect2 role="package">
     <title/>
 
-    <para>The Bash package contains the Bourne-Again SHell.</para>
+    <para>The Bash package contains the Bourne-Again Shell.</para>
 
     <segmentedlist>
       <segtitle>&buildtime;</segtitle>
@@ -73,8 +73,8 @@
 
 <screen><userinput remap="test">chown -Rv tester .</userinput></screen>
 
-    <para>The testsuite of the package is designed to be run as a non-&root;
+    <para>The test suite of this package is designed to be run as a non-&root;
-    user that owns the terminal connected to standard input.  To satisfy the
+    user who owns the terminal connected to standard input.  To satisfy the
     requirement, spawn a new pseudo terminal using
     <application>Expect</application> and run the tests as the <systemitem
     class="username">tester</systemitem> user:</para>

chapter08/gawk.xml

@@ -44,10 +44,6 @@
 
 <screen><userinput remap="pre">sed -i 's/extras//' Makefile.in</userinput></screen>
 
-    <para>Now fix a programming error identified upstream:</para>
-
-<screen><userinput remap="pre">sed -i '241i UPREF(m);' interpret.h</userinput></screen>
-
     <para>Prepare Gawk for compilation:</para>
 
 <screen><userinput remap="configure">./configure --prefix=/usr</userinput></screen>

chapter08/gcc.xml

@@ -76,8 +76,8 @@ cd       build</userinput></screen>
              --disable-bootstrap      \
              --with-system-zlib</userinput></screen>
 
-    <para>Note that for other programming languages there are some prerequisites that
+    <para>GCC supports seven different computer languages, but the
-    are not yet available. See the
+    prerequisites for most of them have not yet been installed. See the
     <ulink url="&blfs-book;general/gcc.html">BLFS Book GCC page</ulink>
     for instructions on how to build all of GCC's supported languages.</para>
 
@@ -87,8 +87,8 @@ cd       build</userinput></screen>
       <varlistentry>
         <term><parameter>LD=ld</parameter></term>
         <listitem>
-          <para>This parameter makes the configure script use the ld installed
+          <para>This parameter makes the configure script use the ld program installed
-          by the binutils built earlier in this chapter, rather than
+          by the Binutils package built earlier in this chapter, rather than
           the cross-built version which would otherwise be used.</para>
         </listitem>
       </varlistentry>
@@ -97,7 +97,7 @@ cd       build</userinput></screen>
         <term><parameter>--with-system-zlib</parameter></term>
         <listitem>
           <para>This switch tells GCC to link to the system installed copy of
-          the zlib library, rather than its own internal copy.</para>
+          the Zlib library, rather than its own internal copy.</para>
         </listitem>
       </varlistentry>
     </variablelist>
@@ -105,21 +105,21 @@ cd       build</userinput></screen>
     <note>
       <anchor id="pie-ssp-info" xreflabel="note on PIE and SSP"/>
       <para>
-        PIE (position-independent executable) is a technique to produce
+        PIE (position-independent executables) are
         binary programs that can be loaded anywhere in memory.  Without PIE,
         the security feature named ASLR (Address Space Layout Randomization)
-        can be applied for the shared libraries, but not the executable
+        can be applied for the shared libraries, but not for the executables
-        itself.  Enabling PIE allows ASLR for the executables in addition to
+        themselves.  Enabling PIE allows ASLR for the executables in addition to
         the shared libraries, and mitigates some attacks based on fixed
         addresses of sensitive code or data in the executables.
       </para>
       <para>
         SSP (Stack Smashing Protection) is a technique to ensure
-        that the parameter stack is not corrupted. Stack corruption can
+        that the parameter stack is not corrupted. Stack corruption can,
-        for example alter the return address of a subroutine,
+        for example, alter the return address of a subroutine,
-        which would allow transferring control to some dangerous code
+        thus transferring control to some dangerous code
         (existing in the program or shared libraries, or injected by the
-        attacker somehow) instead of the original one.
+        attacker somehow).
       </para>
     </note>
 
@@ -129,10 +129,10 @@ cd       build</userinput></screen>
 
     <important>
       <para>In this section, the test suite for GCC is considered
-      important, but it takes a long time. First time builders are
+      important, but it takes a long time. First-time builders are
-      encouraged to not skip it.  The time to run the tests can be
+      encouraged to run the test suite.  The time to run the tests can be
-      reduced significantly by adding -jx to the make command below
+      reduced significantly by adding -jx to the <command>make -k check</command> command below,
-      where x is the number of cores on your system.</para>
+      where x is the number of CPU cores on your system.</para>
     </important>
 
    <para>One set of tests in the GCC test suite is known to exhaust the default
@@ -145,11 +145,11 @@ cd       build</userinput></screen>
 <screen><userinput remap="test">chown -Rv tester .
 su tester -c "PATH=$PATH make -k check"</userinput></screen>
 
-    <para>To receive a summary of the test suite results, run:</para>
+    <para>To extract a summary of the test suite results, run:</para>
 
 <screen><userinput remap="test">../contrib/test_summary</userinput></screen>
 
-    <para>For only the summaries, pipe the output through
+    <para>To filter out only the summaries, pipe the output through
     <userinput>grep -A7 Summ</userinput>.</para>
 
     <para>Results can be compared with those located at <ulink
@@ -221,8 +221,8 @@ su tester -c "PATH=$PATH make -k check"</userinput></screen>
 <screen><userinput remap="install">make install</userinput></screen>
 
     <para>The GCC build directory is owned by <systemitem class="username">
-    tester</systemitem> now and the ownership of the installed header
+    tester</systemitem> now, and the ownership of the installed header
-    directory (and its content) will be incorrect.  Change the ownership to
+    directory (and its content) is incorrect.  Change the ownership to the
     <systemitem class="username">root</systemitem> user and group:</para>
 
 <screen><userinput remap="install">chown -v -R root:root \
@@ -259,7 +259,7 @@ readelf -l a.out | grep ': /lib'</userinput></screen>
 
 <screen><computeroutput>[Requesting program interpreter: /lib/ld-linux-aarch64.so.1]</computeroutput></screen>
 
-  <para>Now make sure that we're setup to use the correct start files:</para>
+  <para>Now make sure that we're set up to use the correct start files:</para>
 
 <screen><userinput>grep -E -o '/usr/lib.*/S?crt[1in].*succeeded' dummy.log</userinput></screen>
 
@@ -308,7 +308,7 @@ SEARCH_DIR("/usr/local/lib")
 SEARCH_DIR("/lib")
 SEARCH_DIR("/usr/lib");</computeroutput></screen>
 
-   <para>A 32-bit system may see a few different directories. For example, here
+   <para>A 32-bit system may use a few other directories. For example, here
    is the output from an i686 machine:</para>
 
 <screen><computeroutput>SEARCH_DIR("/usr/i686-pc-linux-gnu/lib32")
@@ -341,7 +341,7 @@ SEARCH_DIR("/usr/lib");</computeroutput></screen>
   at all, then something is seriously wrong. Investigate and retrace the
   steps to find out where the problem is and correct it. <!--The most likely
   reason is that something went wrong with the specs file adjustment.--> Any
-  issues will need to be resolved before continuing with the process.</para>
+  issues should be resolved before continuing with the process.</para>
 
   <para>Once everything is working correctly, clean up the test files:</para>
 
@@ -408,7 +408,7 @@ mv -v /usr/lib/*gdb.py /usr/share/gdb/auto-load/usr/lib</userinput></screen>
         <term><command>cpp</command></term>
         <listitem>
           <para>The C preprocessor; it is used by the compiler to expand the
-          #include, #define, and similar statements in the source files</para>
+          #include, #define, and similar directives in the source files</para>
           <indexterm zone="ch-system-gcc cpp">
             <primary sortas="b-cpp">cpp</primary>
           </indexterm>
@@ -441,7 +441,7 @@ mv -v /usr/lib/*gdb.py /usr/share/gdb/auto-load/usr/lib</userinput></screen>
           <para>A wrapper around <command>ar</command> that adds a
           plugin to the command line. This program is only used
           to add "link time optimization" and is not useful with the
-          default build options</para>
+          default build options.</para>
           <indexterm zone="ch-system-gcc gcc-ar">
             <primary sortas="b-gcc-ar">gc-ar</primary>
           </indexterm>
@@ -454,7 +454,7 @@ mv -v /usr/lib/*gdb.py /usr/share/gdb/auto-load/usr/lib</userinput></screen>
           <para>A wrapper around <command>nm</command> that adds a
           plugin to the command line. This program is only used
           to add "link time optimization" and is not useful with the
-          default build options</para>
+          default build options.</para>
           <indexterm zone="ch-system-gcc gcc-nm">
             <primary sortas="b-gcc-nm">gc-nm</primary>
           </indexterm>
@@ -467,7 +467,7 @@ mv -v /usr/lib/*gdb.py /usr/share/gdb/auto-load/usr/lib</userinput></screen>
           <para>A wrapper around <command>ranlib</command> that adds a
           plugin to the command line. This program is only used
           to add "link time optimization" and is not useful with the
-          default build options</para>
+          default build options.</para>
           <indexterm zone="ch-system-gcc gcc-ranlib">
             <primary sortas="b-gcc-ranlib">gc-ranlib</primary>
           </indexterm>
@@ -478,7 +478,7 @@ mv -v /usr/lib/*gdb.py /usr/share/gdb/auto-load/usr/lib</userinput></screen>
         <term><command>gcov</command></term>
         <listitem>
           <para>A coverage testing tool; it is used to analyze programs to
-          determine where optimizations will have the most effect</para>
+          determine where optimizations will have the greatest effect</para>
           <indexterm zone="ch-system-gcc gcov">
             <primary sortas="b-gcov">gcov</primary>
           </indexterm>
@@ -559,7 +559,7 @@ mv -v /usr/lib/*gdb.py /usr/share/gdb/auto-load/usr/lib</userinput></screen>
       <varlistentry id="libgcov">
         <term><filename class="libraryfile">libgcov</filename></term>
         <listitem>
-          <para>This library is linked in to a program when GCC is instructed
+          <para>This library is linked into a program when GCC is instructed
           to enable profiling</para>
           <indexterm zone="ch-system-gcc libgcov">
             <primary sortas="c-libgcov">libgcov</primary>
@@ -601,7 +601,7 @@ mv -v /usr/lib/*gdb.py /usr/share/gdb/auto-load/usr/lib</userinput></screen>
       <varlistentry id="liblto_plugin">
         <term><filename class="libraryfile">liblto_plugin</filename></term>
         <listitem>
-          <para>GCC's LTO plugin allows binutils to process object files
+          <para>GCC's LTO plugin allows Binutils to process object files
           produced by GCC with LTO enabled</para>
           <indexterm zone="ch-system-gcc liblto_plugin">
             <primary sortas="c-liblto_plugin">liblto_plugin</primary>
@@ -623,8 +623,8 @@ mv -v /usr/lib/*gdb.py /usr/share/gdb/auto-load/usr/lib</userinput></screen>
         <term><filename class="libraryfile">libssp</filename></term>
         <listitem>
           <para>Contains routines supporting GCC's stack-smashing protection
-          functionality.  Normally it's unused because glibc also provides
+          functionality.  Normally it is not used, because Glibc also provides
-          those routines</para>
+          those routines.</para>
           <indexterm zone="ch-system-gcc libssp">
             <primary sortas="c-libssp">libssp</primary>
           </indexterm>

chapter08/gdbm.xml

@@ -24,7 +24,7 @@
     <title/>
 
     <para>The GDBM package contains the GNU Database Manager.  It is a library
-    of database functions that use extensible hashing and works similar to the
+    of database functions that uses extensible hashing and works like the
     standard UNIX dbm.  The library provides primitives for storing key/data
     pairs, searching and retrieving the data by its key and deleting a key
     along with its data. </para>

chapter08/gettext.xml

@@ -346,7 +346,7 @@ chmod -v 0755 /usr/lib/preloadable_libintl.so</userinput></screen>
       <varlistentry id="libasprintf">
         <term><filename class="libraryfile">libasprintf</filename></term>
         <listitem>
-          <para>defines the <emphasis>autosprintf</emphasis> class, which makes
+          <para>Defines the <emphasis>autosprintf</emphasis> class, which makes
           C formatted output routines usable in C++ programs, for use with the
           <emphasis>&lt;string&gt;</emphasis> strings and the
           <emphasis>&lt;iostream&gt;</emphasis> streams</para>
@@ -359,7 +359,7 @@ chmod -v 0755 /usr/lib/preloadable_libintl.so</userinput></screen>
       <varlistentry id="libgettextlib">
         <term><filename class="libraryfile">libgettextlib</filename></term>
         <listitem>
-          <para>a private library containing common routines used by the
+          <para>Contains common routines used by the
           various Gettext programs; these are not intended for general use</para>
           <indexterm zone="ch-system-gettext libgettextlib">
             <primary sortas="c-libgettextlib">libgettextlib</primary>
@@ -385,7 +385,7 @@ chmod -v 0755 /usr/lib/preloadable_libintl.so</userinput></screen>
       <varlistentry id="libgettextsrc">
         <term><filename class="libraryfile">libgettextsrc</filename></term>
         <listitem>
-          <para>A private library containing common routines used by the
+          <para>Provides common routines used by the
           various Gettext programs; these are not intended for general use</para>
           <indexterm zone="ch-system-gettext libgettextsrc">
             <primary sortas="c-libgettextsrc">libgettextsrc</primary>
@@ -406,8 +406,8 @@ chmod -v 0755 /usr/lib/preloadable_libintl.so</userinput></screen>
       <varlistentry id="preloadable_libintl">
         <term><filename class="libraryfile">preloadable_libintl</filename></term>
         <listitem>
-          <para>A library, intended to be used by LD_PRELOAD that assists
+          <para>A library, intended to be used by LD_PRELOAD, that helps
-          <filename class="libraryfile">libintl</filename> in logging
+          <filename class="libraryfile">libintl</filename> log
           untranslated messages</para>
           <indexterm zone="ch-system-gettext preloadable_libintl">
             <primary sortas="c-preloadable_libintl">preloadable_libintl</primary>

chapter08/libelf.xml

@@ -41,8 +41,8 @@
   <sect2 role="installation">
     <title>Installation of Libelf</title>
 
-      <para>Libelf is part of elfutils-&elfutils-version; package. Use
+      <para>Libelf is part of the elfutils-&elfutils-version; package. Use
-      the elfutils-&elfutils-version;.tar.bz2 as the source tarball.</para>
+      the elfutils-&elfutils-version;.tar.bz2 file as the source tarball.</para>
 
     <para>Prepare Libelf for compilation:</para>
 
@@ -59,7 +59,7 @@
 <screen><userinput remap="test">make check</userinput></screen>
 
     <para>One test named <filename>run-low_high_pc.sh</filename> is known to
-    fail on ARM64.</para>
+    fail on ARM64 systems.</para>
 
     <para>Install only Libelf:</para>
 

chapter08/libffi.xml

@@ -26,6 +26,11 @@
     <para>The Libffi library provides a portable, high level programming
     interface to various calling conventions. This allows a programmer to call
     any function specified by a call interface description at run time.</para>
+  
+    <para>FFI stands for Foreign Function Interface. An FFI allows a program written
+    in one language to call a program written in another language. Specifically,
+    Libffi can provide a bridge between an interpreter like Perl, or Python, and
+    shared library subroutines written in C, or C++.</para>
 
     <segmentedlist>
       <segtitle>&buildtime;</segtitle>
@@ -43,7 +48,7 @@
     <title>Installation of Libffi</title>
 
     <note>
-      <para>Similar to GMP, libffi builds with optimizations specific
+      <para>Like GMP, Libffi builds with optimizations specific
       to the processor in use. If building for another system, change the
       value of the <parameter>--with-gcc-arch=</parameter> parameter in the
       following command to an architecture name fully implemented by the
@@ -52,7 +57,7 @@
       Illegal Operation Errors.</para>
     </note>
 
-    <para>Prepare libffi for compilation:</para>
+    <para>Prepare Libffi for compilation:</para>
 
     <screen><userinput remap="configure">./configure --prefix=/usr          \
             --disable-static       \
@@ -67,7 +72,7 @@
         <listitem>
           <para>Ensure GCC optimizes for the current system.  If this
           is not specified, the system is guessed and the code generated
-          may not be correct for some systems.  If the generated code
+          may not be correct.  If the generated code
           will be copied from the native system to a less capable
           system, use the less capable system as a parameter. For details
           about alternative system types, see <ulink
@@ -80,8 +85,8 @@
         <!-- To editors: try to remove it once GJS fixed (at GNOME 43) -->
         <term><parameter>--disable-exec-static-tramp</parameter></term>
         <listitem>
-          <para>Disable static trampoline support.  It's a new security
+          <para>Disable static trampoline support, a new security
-          feature in libffi, but some BLFS packages (notably
+          feature in Libffi. Some BLFS packages (notably
           <application>GJS</application>) have not been adapted for it.</para>
         </listitem>
       </varlistentry>
@@ -124,7 +129,7 @@
       <varlistentry id="libffi">
         <term><filename class="libraryfile">libffi</filename></term>
         <listitem>
-          <para>contains the foreign function interface API functions</para>
+          <para>Contains the foreign function interface API functions</para>
           <indexterm zone="ch-system-libffi">
             <primary sortas="c-libffi">libffi</primary>
           </indexterm>

chapter08/libtool.xml

@@ -24,7 +24,7 @@
     <title/>
 
     <para>The Libtool package contains the GNU generic library support script.
-    It wraps the complexity of using shared libraries in a consistent, portable
+    It makes the use of shared libraries simpler with a consistent, portable
     interface.</para>
 
     <segmentedlist>
@@ -54,7 +54,7 @@
 
 <screen><userinput remap="test">make -k check</userinput></screen>
 
-    <note><para>The test time for libtool can be reduced significantly on a
+    <note><para>The test time for Libtool can be reduced significantly on a
     system with multiple cores.  To do this, append
     <command>TESTSUITEFLAGS=-j&lt;N&gt;</command> to the line above.  For
     instance, using -j4 can reduce the test time by over 60
@@ -62,7 +62,7 @@
 
     <para>Five tests are known to fail in the LFS build environment due
     to a circular dependency, but these tests pass if rechecked after
-    automake is installed.  Additionally, with grep-3.8, two tests will
+    automake has been installed.  Additionally, with grep-3.8, two tests will
     trigger a warning for non-POSIX regular expressions and fail.</para>
 
     <para>Install the package:</para>
@@ -123,7 +123,7 @@
       <varlistentry id="libltdl">
         <term><filename class="libraryfile">libltdl</filename></term>
         <listitem>
-          <para>Hides the various difficulties of dlopening libraries</para>
+          <para>Hides the various difficulties of opening dynamically loaded libraries</para>
           <indexterm zone="ch-system-libtool libltdl">
             <primary sortas="c-libltdl">libltdl</primary>
           </indexterm>

chapter08/ninja.xml

@@ -36,10 +36,10 @@
     </segmentedlist>
 
     <tip revision="sysv">
-      <para>This section is not strictly required for LFS if not using
+      <para>This section is not strictly required when LFS does not use
-      systemd. On the other hand, ninja associated to meson makes
+      systemd. On the other hand, Ninja, along with Meson, makes
       a powerful build system combination,
-      which is expected to be used more and more often. It is required for
+      which will probably be used more and more often. It is required for
       several packages in <ulink url="&blfs-book;">the BLFS
       book</ulink>.</para>
     </tip>
@@ -49,12 +49,12 @@
   <sect2 role="installation">
     <title>Installation of Ninja</title>
 
-    <para>When run, ninja normally runs a maximum number of processes
+    <para>When run, <command>ninja</command> normally utilizes the greatest
-    in parallel.  By default this is the number of cores on the system
+    possible number of processes in parallel.  By default this is the number of cores on the system,
-    plus two.  In some cases this can overheat a CPU or run a system out
+    plus two.  This may overheat the CPU, or make the system run out
-    of memory.  If run from the command line, passing a -jN parameter
+    of memory.  When <command>ninja</command> is invoked from the command line, passing the -jN parameter
-    will limit the number of parallel processes, but some packages
+    will limit the number of parallel processes. Some packages
-    embed the execution of ninja and do not pass a -j parameter.</para>
+    embed the execution of <command>ninja</command>, and do not pass the -j parameter on to it.</para>
 
     <para>Using the <emphasis>optional</emphasis> procedure below allows a user to
     limit the number of parallel processes via an environment variable,
@@ -62,10 +62,10 @@
 
     <screen>export NINJAJOBS=4</screen>
 
-    will limit ninja to four parallel processes.</para>
+    will limit <command>ninja</command> to four parallel processes.</para>
 
-    <para>If desired, add the capability to use the environment variable
+    <para>If desired, make <command>ninja</command> recognize the environment variable
-    NINJAJOBS by running:</para>
+    NINJAJOBS by running the stream editor:</para>
 
 <screen><userinput remap="pre">sed -i '/int Guess/a \
   int   j = 0;\
@@ -84,7 +84,7 @@
       <varlistentry>
         <term><parameter>--bootstrap</parameter></term>
         <listitem>
-          <para>This parameter forces ninja to rebuild itself for the current
+          <para>This parameter forces Ninja to rebuild itself for the current
           system.</para>
         </listitem>
       </varlistentry>

chapter08/openssl.xml

@@ -89,13 +89,13 @@ make MANSUFFIX=ssl install</userinput></screen>
         You should update OpenSSL when a new version which fixes vulnerabilities
         is announced.  Since OpenSSL 3.0.0, the OpenSSL versioning scheme
         follows the MAJOR.MINOR.PATCH format.  API/ABI compatibility
-        are guaranteed for the same MAJOR version number.  Because LFS
+        is guaranteed for the same MAJOR version number.  Because LFS
         installs only the shared libraries, there is no need to recompile
         packages which link to
         <filename class="libraryfile">libcrypto.so</filename> or
         <filename class="libraryfile">libssl.so</filename>
-        <emphasis>when upgrading to a version with MAJOR version number
+        <emphasis>when upgrading to a version with the same MAJOR version
-        unchanged</emphasis>.
+        number</emphasis>.
       </para>
 
       <para>

chapter08/perl.xml

@@ -46,7 +46,7 @@
 
 <screen><userinput remap="pre">patch -Np1 -i ../&perl-fix-patch;</userinput></screen>
 -->
-    <para>This version of Perl now builds the Compress::Raw::Zlib and
+    <para>This version of Perl builds the Compress::Raw::Zlib and
     Compress::Raw::BZip2 modules. By
     default Perl will use an internal copy of the sources for the build.
     Issue the following command so that Perl will use the libraries
@@ -57,7 +57,7 @@ export BUILD_BZIP2=0</userinput></screen>
 
     <para>To have full control over the way Perl is set up, you can remove the
     <quote>-des</quote> options from the following command and hand-pick the way
-    this package is built. Alternatively, use the command exactly as below to
+    this package is built. Alternatively, use the command exactly as shown below to
     use the defaults that Perl auto-detects:</para>
 
  <screen><userinput remap="configure">sh Configure -des                                         \
@@ -82,7 +82,7 @@ export BUILD_BZIP2=0</userinput></screen>
         <term><parameter>-Dvendorprefix=/usr</parameter></term>
         <listitem>
           <para>This ensures <command>perl</command> knows how to
-          tell packages where they should install their perl modules.</para>
+          tell packages where they should install their Perl modules.</para>
         </listitem>
       </varlistentry>
 
@@ -99,33 +99,33 @@ export BUILD_BZIP2=0</userinput></screen>
         -Dman3dir=/usr/share/man/man3</parameter></term>
         <listitem>
           <para>Since Groff is not installed yet, <command>Configure</command>
-          thinks that we do not want man pages for Perl.  Issuing these
+          will not create man pages for Perl.  These
-          parameters overrides this decision.</para>
+          parameters override this behavior.</para>
         </listitem>
       </varlistentry>
 
       <varlistentry>
         <term><parameter>-Duseshrplib</parameter></term>
         <listitem>
-          <para>Build a shared libperl needed by some perl modules.</para>
+          <para>Build a shared libperl needed by some Perl modules.</para>
         </listitem>
       </varlistentry>
 
       <varlistentry>
         <term><parameter>-Dusethreads</parameter></term>
         <listitem>
-          <para>Build perl with support for threads.</para>
+          <para>Build Perl with support for threads.</para>
         </listitem>
       </varlistentry>
 
       <varlistentry>
         <term><parameter>-Dprivlib,-Darchlib,-Dsitelib,...</parameter></term>
         <listitem>
-          <para>These settings define where Perl is looking for installed
+          <para>These settings define where Perl looks for installed
           modules. The LFS editors chose to put them in a directory structure
           based on the Major.Minor version of Perl (&perl-version-min;) which
           allows upgrading Perl to newer Patch levels (&perl-version;) without
-          the need to reinstall all of the modules again.</para>
+          reinstalling all of the modules.</para>
         </listitem>
       </varlistentry>
 
@@ -185,7 +185,7 @@ unset BUILD_ZLIB BUILD_BZIP2</userinput></screen>
       <varlistentry id="corelist">
         <term><command>corelist</command></term>
         <listitem>
-          <para>A commandline frontend to Module::CoreList</para>
+          <para>A command line front end to Module::CoreList</para>
           <indexterm zone="ch-system-perl corelist">
             <primary sortas="b-corelist">corelist</primary>
           </indexterm>
@@ -250,8 +250,8 @@ unset BUILD_ZLIB BUILD_BZIP2</userinput></screen>
       <varlistentry id="instmodsh">
         <term><command>instmodsh</command></term>
         <listitem>
-          <para>Shell script for examining installed Perl modules,
+          <para>Shell script for examining installed Perl modules;
-          and can create a tarball from an installed module</para>
+          it can create a tarball from an installed module</para>
           <indexterm zone="ch-system-perl instmodsh">
             <primary sortas="b-instmodsh">instmodsh</primary>
           </indexterm>
@@ -284,7 +284,7 @@ unset BUILD_ZLIB BUILD_BZIP2</userinput></screen>
         <listitem>
           <para>Combines some of the best features of C, <command>sed</command>,
           <command>awk</command> and <command>sh</command> into a single
-          swiss-army language</para>
+          Swiss Army language</para>
           <indexterm zone="ch-system-perl perl">
             <primary sortas="b-perl">perl</primary>
           </indexterm>

chapter08/python.xml

@@ -25,7 +25,8 @@
 
     <para>The Python 3 package contains the Python development environment. It
     is useful for object-oriented programming, writing scripts, prototyping
-    large programs, or developing entire applications.</para>
+    large programs, and developing entire applications. Python is an interpreted
+    computer language.</para>
 
     <segmentedlist>
       <segtitle>&buildtime;</segtitle>
@@ -56,7 +57,7 @@
     <varlistentry>
       <term><parameter>--with-system-expat</parameter></term>
       <listitem>
-        <para>This switch enables linking against system version of
+        <para>This switch enables linking against the system version of
         <application>Expat</application>.</para>
        </listitem>
      </varlistentry>
@@ -64,15 +65,19 @@
     <varlistentry>
       <term><parameter>--with-system-ffi</parameter></term>
       <listitem>
-        <para>This switch enables linking against system version of
+        <para>This switch enables linking against the system version of
-        <application>libffi</application>.</para>
+        <filename class='libraryfile'>libffi.so</filename>.</para>
       </listitem>
     </varlistentry>
 
     <varlistentry>
       <term><parameter>--enable-optimizations</parameter></term>
       <listitem>
-        <para>This switch enables stable, but expensive, optimizations.</para>
+        <para>This switch enables extensive, but time-consuming, optimization
+        steps. The interpreter is built twice; tests performed on the first 
+        build are used to improve the optimized final version.</para>
+        <!-- This description was drawn from the README.rst file
+        in the Python-3.11.0 package. -->
       </listitem>
     </varlistentry>
 
@@ -84,7 +89,7 @@
 
     <para>Running the tests at this point is not recommended.  The
     tests are known to hang indefinitely in the partial LFS environment.
-    If desired, the tests can be rerun at the end of this chapter or
+    If desired, the tests can be rerun at the end of this chapter, or
     when Python 3 is reinstalled in BLFS.  To run the tests anyway,
     issue <command>make test</command>.</para>
 
@@ -92,29 +97,34 @@
 
 <screen><userinput remap="install">make install</userinput></screen>
 
-    <para>In several places we use the <command>pip3</command> command to
+    <para>We use the <command>pip3</command> command to
     install Python 3 programs and modules for all users as
-    <systemitem class='username'>root</systemitem>. This conflicts
+    <systemitem class='username'>root</systemitem> in several places in this book.
-    with the Python developers recommendation to install packages into a
+    This conflicts with the Python developers' recommendation: to install packages into a
-    virtual environment or the home directory of a regular user (by running
+    virtual environment, or into the home directory of a regular user (by running
-    <command>pip3</command> as this user). To this end, a multi-line warning
+    <command>pip3</command> as this user). A multi-line warning
-    is written when using <command>pip3</command> as the
+    is triggered whenever <command>pip3</command> is issued by the
-    <systemitem class='username'>root</systemitem> user.  The main reason
+    <systemitem class='username'>root</systemitem> user.</para>
-    of this recommendation is for avoiding a conflict with the system
+    
-    package manager (<command>dpkg</command> for example), but LFS does not
+    <para>The main reason
-    have a system-wide package manager so this is not a problem.  And,
+    for the recommendation is to avoid conflicts with the system's
-    <command>pip3</command> will attempt to check for a new version of
+    package manager (<command>dpkg</command>, for example). LFS does not
-    itself whenever it's run.  As domain name resolving is not configured
+    have a system-wide package manager, so this is not a problem.  Also,
-    yet in LFS chroot environment, it will fail to check for a new version
+    <command>pip3</command> will check for a new version of
-    and produce a warning.  Once we boot the LFS system and set up network
+    itself whenever it's run.  Since domain name resolution is not yet configured
-    connection, it will then produce a warning telling the user to update it
+    in the LFS chroot environment, <command>pip3</command> cannot check
-    from a pre-built wheel on PyPI if any new version is available.  But LFS
+    for a new version of itself, and will
-    consider <command>pip3</command> a part of Python 3 so it should not be
+    produce a warning. </para>
-    updated separately, and an update from a pre-built wheel will deviate
+  
-    from our purpose to build a Linux system from source code.  So the
+    <para>After we boot the LFS system and set up a network connection,
-    warning for a new <command>pip3</command> version should be ignored as
+    a different warning will be issued, telling the user to update <command>pip3</command>
-    well. If desired, suppress these warnings by running the following
+    from a pre-built wheel on PyPI (whenever a new version is available).  But LFS
-    commands:</para>
+    considers <command>pip3</command> to be a part of Python 3, so it should not be
+    updated separately. Also, an update from a pre-built wheel would deviate
+    from our objective: to build a Linux system from source code.  So the
+    warning about a new version of <command>pip3</command> should be ignored as
+    well. If you wish, you can suppress all these warnings by running the following
+    command, which creates a configuration file:</para>
 
 <screen><userinput remap="install">cat &gt; /etc/pip.conf &lt;&lt; EOF
 <literal>[global]
@@ -130,20 +140,20 @@ EOF
     <important>
       <para>
         In LFS and BLFS we normally build and install Python modules with the
-        <command>pip3</command> command.  Please take care that the
+        <command>pip3</command> command.  Please be sure that the
-        <command>pip3 install</command> commands in both the books should be
+        <command>pip3 install</command> commands in both books are
-        run as the &root; user unless it's for a Python virtual environment.
+        run as the &root; user (unless it's for a Python virtual environment).
-        Running a <command>pip3 install</command> as a non-&root; user may seem
+        Running <command>pip3 install</command> as a non-&root; user may seem
-        to work fine, but it will cause the installed module to be inaccessible
+        to work, but it will cause the installed module to be inaccessible
         by other users.
       </para>
 
       <para>
         <command>pip3 install</command> will not reinstall an already installed
-        module by default.  For using the <command>pip3 install</command>
+        module automatically.  When using the <command>pip3 install</command>
         command to upgrade a module (for example, from meson-0.61.3 to
         meson-0.62.0), insert the option <parameter>--upgrade</parameter> into
-        the command line.  If it's really necessary to downgrade a module or
+        the command line.  If it's really necessary to downgrade a module, or
         reinstall the same version for some reason, insert
         <parameter>--force-reinstall --no-deps</parameter> into the command
         line.
@@ -167,7 +177,7 @@ tar --strip-components=1  \
       <term><option>--no-same-owner</option> and <option>--no-same-permissions</option></term>
       <listitem>
         <para>Ensure the installed files have the correct ownership and
-        permissions.  Without these options, using <application>tar</application>
+        permissions.  Without these options, <application>tar</application>
         will install the package files with the upstream creator's values.
         </para>
       </listitem>
@@ -226,8 +236,8 @@ tar --strip-components=1  \
           <para>
             is a wrapper script that opens a <application>Python</application>
             aware GUI editor. For this script to run, you must have installed
-            <application>Tk</application> before Python so that the Tkinter
+            <application>Tk</application> before Python, so that the Tkinter
-            Python module is built
+            Python module is built.
           </para>
           <indexterm zone="ch-system-Python">
             <primary sortas="b-idle3">idle3</primary>
@@ -240,7 +250,7 @@ tar --strip-components=1  \
         <listitem>
           <para>
             The package installer for Python. You can use pip to install
-            packages from Python Package Index and other indexes
+            packages from Python Package Index and other indexes.
           </para>
           <indexterm zone="ch-system-Python">
             <primary sortas="b-pip3">pip3</primary>
@@ -264,8 +274,8 @@ tar --strip-components=1  \
         <term><command>python3</command></term>
         <listitem>
           <para>
-            is an interpreted, interactive, object-oriented programming
+            is the interpreter for Python, an interpreted, interactive, 
-            language
+            object-oriented programming language
           </para>
           <indexterm zone="ch-system-Python">
             <primary sortas="b-python3">python3</primary>

chapter08/shadow.xml

@@ -62,7 +62,9 @@ find man -name Makefile.in -exec sed -i 's/passwd\.5 / /'   {} \;</userinput></s
     <para id="shadow-login_defs">Instead of using the default
     <emphasis>crypt</emphasis> method, use the more secure
     <emphasis>SHA-512</emphasis> method of password encryption, which also
-    allows passwords longer than 8 characters. It is also necessary to change
+    allows passwords longer than 8 characters. In addition, set the number of
+    rounds to 500,000 instead of the default 5000, which is much too low to
+    prevent brute force password attacks. It is also necessary to change
     the obsolete <filename class="directory">/var/spool/mail</filename> location
     for user mailboxes that Shadow uses by default to the <filename
     class="directory">/var/mail</filename> location used currently. And,
@@ -80,6 +82,7 @@ find man -name Makefile.in -exec sed -i 's/passwd\.5 / /'   {} \;</userinput></s
     </note>
 
 <screen><userinput remap="pre">sed -e 's:#ENCRYPT_METHOD DES:ENCRYPT_METHOD SHA512:' \
+    -e 's@#\(SHA_CRYPT_..._ROUNDS 5000\)@\100@'       \
     -e 's:/var/spool/mail:/var/mail:'                 \
     -e '/PATH=/{s@/sbin:@@;s@/bin:@@}'                \
     -i etc/login.defs</userinput></screen>
@@ -639,7 +642,7 @@ useradd -D --gid 999</userinput></screen>
       <varlistentry id="libsubid">
         <term><filename class='libraryfile'>libsubid</filename></term>
         <listitem>
-          <para>library for processing subordinate id ranges for users</para>
+          <para>library to handle subordinate id ranges for users and groups</para>
           <indexterm zone="ch-system-shadow libsubid">
             <primary sortas="c-libsubid">libsubid</primary>
           </indexterm>

chapter08/tcl.xml

@@ -3,8 +3,8 @@
   "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
   <!ENTITY % general-entities SYSTEM "../general.ent">
   %general-entities;
-  <!ENTITY tdbc-ver          "1.1.3">
+  <!ENTITY tdbc-ver          "1.1.5">
-  <!ENTITY itcl-ver          "4.2.2">
+  <!ENTITY itcl-ver          "4.2.3">
 ]>
 
 <sect1 id="ch-system-tcl" role="wrap">

chapter08/wheel.xml

@@ -40,21 +40,21 @@
   <sect2 role="installation">
     <title>Installation of Wheel</title>
 
-    <para>Compile wheel with the following command:</para>
+    <para>Compile Wheel with the following command:</para>
 
 <screen><userinput remap="make">PYTHONPATH=src pip3 wheel -w dist --no-build-isolation --no-deps $PWD</userinput></screen>
 
-    <para>Install wheel with the following command:</para>
+    <para>Install Wheel with the following command:</para>
 
 <screen><userinput remap="install">pip3 install --no-index --find-links=dist wheel</userinput></screen>
 
     <variablelist>
-      <title>The meaning of the pip3 commands:</title>
+      <title>The meaning of the pip3 configuration options and commands:</title>
 
       <varlistentry>
         <term><envar>PYTHONPATH=src</envar></term>
         <listitem>
-           <para>Allow using this package (not installed yet) to build a
+           <para>Allows this package (not installed yet) to build a
            wheel archive for itself, to avoid a chicken-or-egg problem.</para>
         </listitem>
       </varlistentry>
@@ -62,14 +62,14 @@
       <varlistentry>
         <term><command>wheel</command></term>
         <listitem>
-           <para>Build wheel archive for this package.</para>
+           <para>This command builds the wheel archive for this package.</para>
         </listitem>
       </varlistentry>
 
       <varlistentry>
         <term><parameter>-w dist</parameter></term>
         <listitem>
-           <para>Put the created wheels into the
+           <para>Instructs pip to put the created wheel into the
            <filename class='directory'>dist</filename> directory.</para>
         </listitem>
       </varlistentry>
@@ -77,7 +77,7 @@
       <varlistentry>
         <term><command>install</command></term>
         <listitem>
-           <para>Install the package.</para>
+           <para>This command installs the package.</para>
         </listitem>
       </varlistentry>
 
@@ -86,9 +86,9 @@
               <parameter>--no-deps</parameter>, and
               <parameter>--no-index</parameter></term>
         <listitem>
-          <para>Prevent pip from fetching files from the online package
+          <para>These options prevent fetching files from the online package
           repository (PyPI). If packages are installed in the correct order,
-          then it won't need to fetch any files in the first place, but these
+          pip won't need to fetch any files in the first place; these
           options add some safety in case of user error.</para>
         </listitem>
       </varlistentry>
@@ -96,7 +96,7 @@
       <varlistentry>
         <term><parameter>--find-links dist</parameter></term>
         <listitem>
-           <para>Search wheel archives from the
+           <para>Instructs pip to search for wheel archives in the
            <filename class='directory'>dist</filename> directory.</para>
         </listitem>
       </varlistentry>
@@ -128,7 +128,7 @@
         <term><command>wheel</command></term>
         <listitem>
           <para>
-            is an utility to unpack, pack, or convert wheel packages
+            is a utility to unpack, pack, or convert wheel archives
           </para>
           <indexterm zone="ch-system-wheel">
             <primary sortas="b-wheel">wheel</primary>

packages.ent

@@ -207,10 +207,10 @@
 <!ENTITY flex-fin-du "33 MB">
 <!ENTITY flex-fin-sbu "0.4 SBU">
 
-<!ENTITY gawk-version "5.2.0">
+<!ENTITY gawk-version "5.2.1">
-<!ENTITY gawk-size "3,307 KB">
+<!ENTITY gawk-size "3,332 KB">
 <!ENTITY gawk-url "&gnu;gawk/gawk-&gawk-version;.tar.xz">
-<!ENTITY gawk-md5 "2f724d925873fc82f5e7b1d605ba9a42">
+<!ENTITY gawk-md5 "02956bc5d117a7437bb4f7039f23b964">
 <!ENTITY gawk-home "&gnu-software;gawk/">
 <!ENTITY gawk-tmp-du "45 MB">
 <!ENTITY gawk-tmp-sbu "0.2 SBU">
@@ -317,10 +317,10 @@
 <!ENTITY gzip-fin-du "21 MB">
 <!ENTITY gzip-fin-sbu "0.3 SBU">
 
-<!ENTITY iana-etc-version "20221025">
+<!ENTITY iana-etc-version "20221122">
-<!ENTITY iana-etc-size "584 KB">
+<!ENTITY iana-etc-size "585 KB">
 <!ENTITY iana-etc-url "https://github.com/Mic92/iana-etc/releases/download/&iana-etc-version;/iana-etc-&iana-etc-version;.tar.gz">
-<!ENTITY iana-etc-md5 "feeb662fd7875d94767fd5aed5ae21d7">
+<!ENTITY iana-etc-md5 "2d4ea18372691d8c6ffd009a766e3380">
 <!ENTITY iana-etc-home "https://www.iana.org/protocols">
 <!ENTITY iana-etc-fin-du "4.8 MB">
 <!ENTITY iana-etc-fin-sbu "less than 0.1 SBU">
@@ -424,12 +424,12 @@
 
 <!ENTITY linux-major-version "6">
 <!ENTITY linux-minor-version "0">
-<!ENTITY linux-patch-version "9">
+<!ENTITY linux-patch-version "11">
 <!--<!ENTITY linux-version "&linux-major-version;.&linux-minor-version;">-->
 <!ENTITY linux-version "&linux-major-version;.&linux-minor-version;.&linux-patch-version;">
-<!ENTITY linux-size "130,776 KB">
+<!ENTITY linux-size "130,780 KB">
 <!ENTITY linux-url "&kernel;linux/kernel/v&linux-major-version;.x/linux-&linux-version;.tar.xz">
-<!ENTITY linux-md5 "3de364bdbacd2115950cc3dd94157ab6">
+<!ENTITY linux-md5 "7a47796e842b77519613abbca6037c91">
 <!ENTITY linux-home "https://www.kernel.org/">
 <!-- measured for 5.13.4 / gcc-11.1.0 on x86_64 : minimum is
  allnoconfig rounded down to allow for ongoing cleanups,
@@ -487,10 +487,10 @@
 <!ENTITY markupsafe-fin-du "168 KB">
 <!ENTITY markupsafe-fin-sbu "less than 0.1 SBU">
 
-<!ENTITY meson-version "0.64.0">
+<!ENTITY meson-version "0.64.1">
-<!ENTITY meson-size "2,042 KB">
+<!ENTITY meson-size "2,041 KB">
 <!ENTITY meson-url "&github;/mesonbuild/meson/releases/download/&meson-version;/meson-&meson-version;.tar.gz">
-<!ENTITY meson-md5 "63a3d83206e7e277fce4b90e8ad8003a">
+<!ENTITY meson-md5 "9f260adfcbc66ed2e15047c6eb98e503">
 <!ENTITY meson-home "https://mesonbuild.com">
 <!ENTITY meson-fin-du "38 MB">
 <!ENTITY meson-fin-sbu "less than 0.1 SBU">
@@ -672,32 +672,32 @@
 <!ENTITY tar-fin-du "40 MB">
 <!ENTITY tar-fin-sbu "1.7 SBU">
 
-<!ENTITY tcl-version "8.6.12">
+<!ENTITY tcl-version "8.6.13">
 <!ENTITY tcl-major-version "8.6">
-<!ENTITY tcl-size "10,112 KB">
+<!ENTITY tcl-size "10,581 KB">
 <!ENTITY tcl-url "https://downloads.sourceforge.net/tcl/tcl&tcl-version;-src.tar.gz">
-<!ENTITY tcl-md5 "87ea890821d2221f2ab5157bc5eb885f">
+<!ENTITY tcl-md5 "0e4358aade2f5db8a8b6f2f6d9481ec2">
 <!ENTITY tcl-home "http://tcl.sourceforge.net/">
 <!ENTITY tcl-docs-url "https://downloads.sourceforge.net/tcl/tcl&tcl-version;-html.tar.gz">
-<!ENTITY tcl-docs-md5 "a0d1a5b60bbb68f2f0bd3066a19c527a">
+<!ENTITY tcl-docs-md5 "4452f2f6d557f5598cca17b786d6eb68">
-<!ENTITY tcl-docs-size "1,176 KB">
+<!ENTITY tcl-docs-size "1,165 KB">
 <!ENTITY tcl-tmp-du "88 MB">
 <!ENTITY tcl-tmp-sbu "3.2 SBU">
 
-<!ENTITY texinfo-version "7.0">
+<!ENTITY texinfo-version "7.0.1">
-<!ENTITY texinfo-size "4,786 KB">
+<!ENTITY texinfo-size "4,776 KB">
 <!ENTITY texinfo-url "&gnu;texinfo/texinfo-&texinfo-version;.tar.xz">
-<!ENTITY texinfo-md5 "c9bda68c809e3afe67f1fbcd7c3d9fd3">
+<!ENTITY texinfo-md5 "545e6fdb23f5c7923c057187aa19f9f4">
 <!ENTITY texinfo-home "&gnu-software;texinfo/">
 <!ENTITY texinfo-tmp-du "113 MB">
 <!ENTITY texinfo-tmp-sbu "0.2 SBU">
 <!ENTITY texinfo-fin-du "114 MB">
 <!ENTITY texinfo-fin-sbu "0.6 SBU">
 
-<!ENTITY tzdata-version "2022f">
+<!ENTITY tzdata-version "2022g">
-<!ENTITY tzdata-size "427 KB">
+<!ENTITY tzdata-size "430 KB">
 <!ENTITY tzdata-url "https://www.iana.org/time-zones/repository/releases/tzdata&tzdata-version;.tar.gz">
-<!ENTITY tzdata-md5 "7dbb997b73a0504b61a83a85988d7771">
+<!ENTITY tzdata-md5 "884250fd2a8a55f6322900ad4ab94d7b">
 <!ENTITY tzdata-home "https://www.iana.org/time-zones">
 
 <!ENTITY udev-lfs-version "udev-lfs-20171102">
@@ -744,10 +744,10 @@
 <!ENTITY xml-parser-fin-du "2.3 MB">
 <!ENTITY xml-parser-fin-sbu "less than 0.1 SBU">
 
-<!ENTITY xz-version "5.2.8">
+<!ENTITY xz-version "5.2.9">
-<!ENTITY xz-size "1,260 KB">
+<!ENTITY xz-size "1,261 KB">
 <!ENTITY xz-url "https://tukaani.org/xz/xz-&xz-version;.tar.xz">
-<!ENTITY xz-md5 "7cfa6136d984083e7d4da12c8fb083ea">
+<!ENTITY xz-md5 "115d93141a38801983572f816c6dd68a">
 <!ENTITY xz-home "https://tukaani.org/xz">
 <!ENTITY xz-tmp-du "16 MB">
 <!ENTITY xz-tmp-sbu "0.1 SBU">