diff --git a/appendices/dependencies.xml b/appendices/dependencies.xml index 1493d84f9..158ed0f04 100644 --- a/appendices/dependencies.xml +++ b/appendices/dependencies.xml @@ -1047,7 +1047,7 @@ &external; - None + libxml2 diff --git a/chapter02/creatingpartition.xml b/chapter02/creatingpartition.xml index ef16c8b92..f5bb244cb 100644 --- a/chapter02/creatingpartition.xml +++ b/chapter02/creatingpartition.xml @@ -40,7 +40,8 @@ /dev/sda for the primary disk drive. Create a Linux native partition and a swap partition, if needed. Please - refer to cfdisk(8) or fdisk(8) if + refer to cfdisk(8) or + fdisk(8) if you do not yet know how to use the programs. For experienced users, other partitioning schemes are possible. diff --git a/chapter04/addinguser.xml b/chapter04/addinguser.xml index 438f60470..3f4d07645 100644 --- a/chapter04/addinguser.xml +++ b/chapter04/addinguser.xml @@ -102,6 +102,7 @@ esac The - instructs su to start a login shell as opposed to a non-login shell. The difference between these two types of shells is described in detail in - bash(1) and info bash. + bash(1) and info + bash. diff --git a/chapter04/settingenviron.xml b/chapter04/settingenviron.xml index 699d49313..67c2bd886 100644 --- a/chapter04/settingenviron.xml +++ b/chapter04/settingenviron.xml @@ -93,8 +93,8 @@ EOF Setting the user file-creation mask (umask) to 022 ensures that newly created files and directories are only writable by their owner, but are readable and executable by anyone (assuming default modes are used by the - open(2) system call, new files will end up with - permission mode 644 and directories with mode 755). + open(2) system call, new files + will end up with permission mode 644 and directories with mode 755). diff --git a/chapter05/glibc.xml b/chapter05/glibc.xml index ee4282047..350912122 100644 --- a/chapter05/glibc.xml +++ b/chapter05/glibc.xml @@ -62,8 +62,9 @@ ln -sfv ../lib/ld-linux-x86-64.so.2 $LFS/lib64/ld-lsb-x86-64.so.3 The above command is correct. The ln command has several syntactic versions, so be sure to check - info coreutils ln and ln(1) - before reporting what may appear to be an error. + info coreutils ln and ln(1) before reporting what may appear to be + an error. diff --git a/chapter07/creatingdirs.xml b/chapter07/creatingdirs.xml index 9f8424809..c93323590 100644 --- a/chapter07/creatingdirs.xml +++ b/chapter07/creatingdirs.xml @@ -57,7 +57,7 @@ install -dv -m 1777 /tmp /var/tmp /tmp and /var/tmp directories, but cannot remove another user's files from them. The latter is prohibited by the so-called - sticky bit, the highest bit (1) in the 1777 bit mask. + sticky bit, the highest bit (1) in the 1777 bit mask. FHS Compliance Note diff --git a/chapter07/python.xml b/chapter07/python.xml index 4ed385d58..84a173426 100644 --- a/chapter07/python.xml +++ b/chapter07/python.xml @@ -83,9 +83,9 @@ Some Python 3 modules can't be built now because the dependencies - are not installed yet. The building system still attempts to build - them however, so the compilation of some files will fail and the - compiler message may seem to indicate fatal error. + are not installed yet. For the ssl module, + a message Python requires a OpenSSL 1.1.1 or + newer is outputted. The message should be ignored. Just make sure the toplevel make command has not failed. The optional modules are not needed now and they will be built in diff --git a/chapter08/e2fsprogs.xml b/chapter08/e2fsprogs.xml index 6a4489dee..c5718c191 100644 --- a/chapter08/e2fsprogs.xml +++ b/chapter08/e2fsprogs.xml @@ -159,7 +159,8 @@ install-info --dir-file=/usr/share/info/dir /usr/share/info/com_err.infosed 's/metadata_csum_seed,//' -i /etc/mke2fs.conf - Read the man page mke2fs.conf(5) for details. + Read the man page mke2fs.conf(5) for details. diff --git a/chapter08/libtool.xml b/chapter08/libtool.xml index bb71ac1c4..4f387b6e8 100644 --- a/chapter08/libtool.xml +++ b/chapter08/libtool.xml @@ -56,8 +56,9 @@ Five tests are known to fail in the LFS build environment due to a circular dependency, but these tests pass if rechecked after - automake has been installed. Additionally, with grep-3.8, two tests will - trigger a warning for non-POSIX regular expressions and fail. + automake has been installed. Additionally, with grep-3.8 or newer, + two tests will trigger a warning for non-POSIX regular expressions and + fail. Install the package: diff --git a/chapter08/ncurses.xml b/chapter08/ncurses.xml index ecd4d52dd..bd395a5a9 100644 --- a/chapter08/ncurses.xml +++ b/chapter08/ncurses.xml @@ -443,16 +443,6 @@ rm -rf DESTDIR - - libcursesw - - A link to libncursesw - - libcursesw - - - - libncursesw diff --git a/chapter08/openssl.xml b/chapter08/openssl.xml index 58fecae61..c07108c84 100644 --- a/chapter08/openssl.xml +++ b/chapter08/openssl.xml @@ -227,7 +227,7 @@ rm -rf DESTDIR is a command-line tool for using the various cryptography functions of OpenSSL's crypto library from the shell. It can be used for various functions which are documented in - openssl(1) + openssl(1) openssl @@ -259,7 +259,8 @@ rm -rf DESTDIR implements the Transport Layer Security (TLS v1) protocol. It provides a rich API, documentation - on which can be found in ssl(7) + on which can be found in ssl(7) libssl.so diff --git a/chapter08/shadow.xml b/chapter08/shadow.xml index 49bcae6de..89678b3f4 100644 --- a/chapter08/shadow.xml +++ b/chapter08/shadow.xml @@ -203,8 +203,8 @@ make -C man install-man to pass either the -g or -N parameter to useradd, or else change the setting of USERGROUPS_ENAB in - /etc/login.defs. See useradd(8) - for more information. + /etc/login.defs. See useradd(8) for more information. Second, to change the default parameters, the file /etc/default/useradd must be created and tailored diff --git a/chapter08/util-linux.xml b/chapter08/util-linux.xml index 30310033d..27691196b 100644 --- a/chapter08/util-linux.xml +++ b/chapter08/util-linux.xml @@ -716,7 +716,8 @@ rm -rf DESTDIR irqtop Displays kernel interrupt counter information in - top(1) style view + top(1) style + view irqtop diff --git a/chapter09/networkd.xml b/chapter09/networkd.xml index 19a1f7c01..3b9dd2cda 100644 --- a/chapter09/networkd.xml +++ b/chapter09/networkd.xml @@ -50,9 +50,11 @@ .netdev and .network files. For detailed descriptions and example contents of these configuration files, consult - the systemd-link(5), - systemd-netdev(5) and - systemd-network(5) manual pages. + the systemd-link(5), + systemd-netdev(5), + and systemd-network(5) manual + pages. Network Device Naming @@ -113,7 +115,7 @@ Name=ether0 EOF - See systemd.link(5) for more information. + See systemd.link(5) for more information. @@ -357,7 +359,9 @@ EOF localhost.localdomain, or the hostname (without a domain) because they are handled by the myhostname NSS module, read - the man page nss-myhostname(8) for details. + the man page nss-myhostname(8) for + details. The ::1 entry is the IPv6 counterpart of 127.0.0.1 and represents the IPv6 loopback interface. diff --git a/chapter09/systemd-custom.xml b/chapter09/systemd-custom.xml index 81a94a148..ffca1a76f 100644 --- a/chapter09/systemd-custom.xml +++ b/chapter09/systemd-custom.xml @@ -21,8 +21,9 @@ of options to control basic systemd operations. The default file has all entries commented out with the default settings indicated. This file is where the log level may be changed as well as some basic logging settings. - See the systemd-system.conf(5) manual page for details - on each configuration option. + See the systemd-system.conf(5) manual + page for details on each configuration option. @@ -89,8 +90,8 @@ EOF /etc/tmpfiles.d override files with the same name in /usr/lib/tmpfiles.d. See - tmpfiles.d(5) manual page for file format - details. + tmpfiles.d(5) manual + page for file format details. Note that the syntax for the @@ -135,7 +136,8 @@ Restart=always RestartSec=30 EOF - See systemd.unit(5) manual page for more + See systemd.unit(5) manual page for more information. After creating the configuration file, run systemctl daemon-reload and systemctl restart foobar to activate the changes to a service. @@ -251,10 +253,11 @@ cat > /etc/systemd/coredump.conf.d/maxuse.conf << EOF MaxUse=5G EOF - See the systemd-coredump(8), - coredumpctl(1), and - coredump.conf.d(5) manual pages for more - information. + See the systemd-coredump(8), + coredumpctl(1), and + coredump.conf.d(5) manual pages for + more information. diff --git a/chapter09/udev.xml b/chapter09/udev.xml index 0fba5a8b4..bd0b75912 100644 --- a/chapter09/udev.xml +++ b/chapter09/udev.xml @@ -225,8 +225,9 @@ Note that the softdep command also allows pre: dependencies, or a mixture of both pre: and post: dependencies. See - the modprobe.d(5) manual page for more information - on softdep syntax and capabilities. + the modprobe.d(5) + manual page for more information on softdep syntax and + capabilities. If the module in question is not a wrapper and is useful by itself, configure the modules bootscript to diff --git a/chapter09/usage.xml b/chapter09/usage.xml index 1fc7189d6..25175c45f 100644 --- a/chapter09/usage.xml +++ b/chapter09/usage.xml @@ -32,7 +32,8 @@ SysVinit (which will be referred to as init from now on) uses a run levels scheme. There are seven run levels, numbered 0 to 6. (Actually, there are more run levels, but the others are for special cases and are - generally not used. See init(8) for more details.) + generally not used. See init(8) for more details.) Each one of the seven corresponds to actions the computer is supposed to perform when it starts up or shuts down. The default run level is 3. Here are the descriptions of the different run levels as they are implemented in LFS: @@ -341,9 +342,10 @@ EOF url="https://tldp.org/HOWTO/HOWTO-INDEX/other-lang.html"/>. If still in doubt, look in the /usr/share/keymaps and /usr/share/consolefonts directories - for valid keymaps and screen fonts. Read the loadkeys(1) and - setfont(8) manual pages to determine the correct - arguments for these programs. + for valid keymaps and screen fonts. Read the loadkeys(1) and setfont(8) manual pages to determine the + correct arguments for these programs. The /etc/sysconfig/console file should contain lines of the form: VARIABLE="value". The following variables are recognized: diff --git a/chapter10/fstab.xml b/chapter10/fstab.xml index c20f806dd..ad835be30 100644 --- a/chapter10/fstab.xml +++ b/chapter10/fstab.xml @@ -56,7 +56,7 @@ EOF class="partition">sda2, sda5, and ext4. For details on the six - fields in this file, see fstab(5). + fields in this file, see fstab(5). Filesystems with MS-DOS or Windows origin (i.e. vfat, ntfs, smbfs, cifs, iso9660, udf) need a special option, utf8, in order for non-ASCII diff --git a/chapter10/kernel.xml b/chapter10/kernel.xml index fdc591e28..cb4e80849 100644 --- a/chapter10/kernel.xml +++ b/chapter10/kernel.xml @@ -356,7 +356,8 @@ located in and in the kernel documentation in the linux-&linux-version;/Documentation directory. - Also, modprobe.d(5) may be of interest. + Also, modprobe.d(5) + may be of interest. Unless module support has been disabled in the kernel configuration, install the modules with: diff --git a/general.ent b/general.ent index 0540ac6c2..31e6daecc 100644 --- a/general.ent +++ b/general.ent @@ -125,6 +125,7 @@ + root"> lfs"> diff --git a/packages.ent b/packages.ent index a3d10250e..18fadcc2c 100644 --- a/packages.ent +++ b/packages.ent @@ -362,7 +362,7 @@ - + diff --git a/prologue/typography.xml b/prologue/typography.xml index 303a107c5..db66b345c 100644 --- a/prologue/typography.xml +++ b/prologue/typography.xml @@ -74,14 +74,15 @@ EOF This format is used to encapsulate text that is optional. - passwd(5) + passwd(5) This format is used to refer to a specific manual (man) page. The number inside parentheses indicates a specific section inside the manuals. For example, passwd has two man pages. Per LFS installation instructions, those two man pages will be located at /usr/share/man/man1/passwd.1 and - /usr/share/man/man5/passwd.5. When the book uses passwd(5) it is + /usr/share/man/man5/passwd.5. When the book uses + passwd(5) it is specifically referring to /usr/share/man/man5/passwd.5. man passwd will print the first man page it finds that matches passwd, which will be @@ -89,7 +90,11 @@ EOF need to run man 5 passwd in order to read the page being specified. Note that most man pages do not have duplicate page names in different sections. Therefore, man <program - name> is generally sufficient. + name> is generally sufficient. In the LFS + book these references to man pages are also hyperlinks, so clicking on + such a reference will open the man page rendered in HTML from + Arch Linux manual + pages.