gronod/lfs
1
0
Fork 0
mirror of https://git.linuxfromscratch.org/lfs.git synced 2025-01-18 13:07:50 +00:00
Code Issues Packages Projects Releases Wiki Activity

Better document the ESP during partition and file system creation.

Browse Source
This commit is contained in:
Zeckmathederg 2024-12-22 22:47:16 -07:00
parent bfb0cbae18
commit 2b934273e5
2 changed files with 47 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

21
chapter02/creatingfilesystem.xml
View File

@ -66,7 +66,7 @@
<para>If you are using an existing <systemitem class="filesystem">swap
</systemitem> partition, there is no need to format it. If a new
<systemitem class="filesystem"> swap</systemitem> partition was created,
<systemitem class="filesystem">swap</systemitem> partition was created,
it will need to be initialized with this command:</para>
<screen role="nodump"><userinput>mkswap /dev/<replaceable>&lt;yyy&gt;</replaceable></userinput></screen>
@ -74,4 +74,23 @@
<para>Replace <replaceable>&lt;yyy&gt;</replaceable> with the name of the
<systemitem class="filesystem">swap</systemitem> partition.</para>
<para>If you have created an EFI System Partition, you have a few options.
Motherboards when booting with UEFI look for EFI applications in partitions
formatted with a FAT variant (FAT12, FAT16, FAT32, VFAT, etc). Usually,
FAT32 or VFAT are the recommended options.</para>
<para>If you have chosen <systemitem class="filesystem">FAT32</systemitem>,
format the ESP with the following command:</para>
<screen role="nodump"><userinput>mkfs.fat -F 32 /dev/<replaceable>&lt;yyy&gt;</replaceable></userinput></screen>
<para>On the other hand, if you have chosen
<systemitem class="filesystem">VFAT</systemitem>, you can run the following
instead:</para>
<screen role="nodump"><userinput>mkfs.vfat /dev/<replaceable>&lt;yyy&gt;</replaceable></userinput></screen>
<para>Replace <replaceable>&lt;yyy&gt;</replaceable> with the name of the
EFI System Partition.</para>
</sect1>

37
chapter02/creatingpartition.xml
View File

@ -109,11 +109,16 @@
<para>If the <emphasis>boot disk</emphasis> has been partitioned with a
GUID Partition Table (GPT), then a small, typically 1 MB, partition must be
created if it does not already exist. This partition is not formatted, but
must be available for GRUB to use during installation of the boot
loader. This partition will normally be labeled 'BIOS Boot' if using
<command>fdisk</command> or have a code of <emphasis>EF02</emphasis> if
using the <command>gdisk</command> command.</para>
created if the system is being booted with BIOS and it does not already
exist. This partition is not formatted, but must be available for GRUB to
use during installation of the boot loader. This partition will normally
be labeled 'BIOS Boot' if using <command>fdisk</command> or have a code of
<emphasis>EF02</emphasis> if using the <command>gdisk</command>
command.</para>
<para>If the boot disk is partitioned with an MBR Partition Table, or DOS
disklabel, then this partition is not needed as space already exists before
the first partition that Grub can use.</para>
<note><para>The Grub Bios partition must be on the drive that the BIOS
uses to boot the system. This is not necessarily the drive that holds
@ -122,6 +127,23 @@
only on the partition table type of the boot disk.</para></note>
</sect3>
<sect3>
<title>The EFI System Partition</title>
<para>This partition, also known as the <emphasis>ESP</emphasis>, is needed
when booting the system with UEFI. It stores the EFI application that is
ran during bootup. The boot drive can be partitioned with MBR Partition
Table, or DOS, but compatibility issues will tend to arise as a result.
Therefore, it is always a good idea in this case to partition the boot
drive with a GUID Partition Table (GPT). Typically 256 MB for this
partition suffices, although the needed size for a Grub EFI application can
go down to 20 MB or lower. The partition label should be 'EFI System' if
using <command>fdisk</command>.</para>
<para>For Grub, the EFI System Partion should be located at
/boot/efi.</para>
</sect3>
<sect3>
<title>Convenience Partitions</title>
@ -137,11 +159,6 @@
your first disk drive. A partition size of 200 megabytes is
adequate.</para></listitem>
<listitem><para>/boot/efi &ndash; The EFI System Partition, which is
needed for booting the system with UEFI. Read
<ulink url="&blfs-book;postlfs/grub-setup.html">the BLFS page</ulink>
for details.</para></listitem>
<listitem><para>/home &ndash; Highly recommended. Share your home
directory and user customization across multiple distributions or LFS
builds. The size is generally fairly large and depends on available disk