History

Fredrik Baberg 4b8e9a92bc Update remote (#96 ) * Update Readme * Move from experimental to stable		2024-02-16 08:16:15 +01:00
..
rootfs	Add 3DPrinter-Remote	2023-03-01 23:27:07 +01:00
CHANGELOG.md	2024.01 (#91 )	2024-01-17 11:02:01 +01:00
config.yaml	Update remote (#96 )	2024-02-16 08:16:15 +01:00
Dockerfile	Add 3DPrinter-Remote	2023-03-01 23:27:07 +01:00
README.md	Update remote (#96 )	2024-02-16 08:16:15 +01:00

README.md

3DPrinter-Remote

Lets you connect a 3D printer to one device and connect to it from a different one running OctoPrint. Add-on runs ser2net and can be connected to by e.g. socat.

Note: Performance will be very dependent on network.

Usage

On the machine connected to the printer (remote machine):

Setup the add-on. At minimum you will need to specify printer_path and verify that baud_rate is correct.

On the machine with OctoPrint (host machine):

Go to Settings --> Serial Connection, section Additional serial ports. Add : socket://<remote machine>:9999. For example, use the IP for remote machine.
Install plugin OctoPrint-Network-Printing