diff --git a/3dprinter-octoprint/DOCS.md b/3dprinter-octoprint/DOCS.md
index c6ac894..08f2875 100644
--- a/3dprinter-octoprint/DOCS.md
+++ b/3dprinter-octoprint/DOCS.md
@@ -11,7 +11,7 @@ By setting trusted proxies you should be able to use HTTPS *if you have placed a
 # OctoPrint integration
 
 You can use the OctoPrint integration with this addon. Go to Home Assistant, add integration OctoPrint, and use the following:
-- Host: `cce6f2d5-3dprinter-octoprint`
+- Host: `cce6f2d5-3dprinter-octoprint` (use the add-on hostname, the first part could differ).
 - port: 5000
 - Don't use SSL (leave unchecked)
 
diff --git a/3dprinter-remote/README.md b/3dprinter-remote/README.md
index f1a061b..8bf287e 100644
--- a/3dprinter-remote/README.md
+++ b/3dprinter-remote/README.md
@@ -8,4 +8,4 @@ On the machine connected to the printer (`remote machine`):
 * Setup the add-on. At minimum you will need to specify `printer_path` and verify that `baud_rate` is correct.
 
 On the machine with OctoPrint:
-* Go to Settings --> Serial Connection, section __Additional serial ports__. Add : `socket://<remote machine>:9999`. For example, use the IP for `remote machine`.
\ No newline at end of file
+* Go to Settings --> Serial Connection, section __Additional serial ports__. Add : `socket://<remote machine>:9999`. For example, use the IP for `remote machine`.
diff --git a/README.md b/README.md
index a4a3877..355115e 100644
--- a/README.md
+++ b/README.md
@@ -14,6 +14,10 @@ You can use the following button to add the repository to your Home Assistant in
 
 OctoPrint, plain and simple.
 
+### 3DPrinter-Remote
+
+Run OctoPrint on a different machine from the printer.
+
 ### Camera-mjpg-streamer
 
-For streaming camera feed.
+Stream from camera.
diff --git a/camera-mjpg-streamer/DOCS.md b/camera-mjpg-streamer/DOCS.md
index 85308d3..c45cb93 100644
--- a/camera-mjpg-streamer/DOCS.md
+++ b/camera-mjpg-streamer/DOCS.md
@@ -16,7 +16,11 @@ The camera stream and snapshot can be accessed by e.g. [MJPEG IP Camera](https:/
 
 Addon hostname can be found under [addon settings](https://my.home-assistant.io/redirect/supervisor_addon/?addon=b7aa59c4_camera-mjpg-streamer&repository_url=https%3A%2F%2Fgithub.com%2Ffredrikbaberg%2Fha-3dprinter-addons).
 
-## Tests
+## Ingress?
+
+Ingress support is included only to verify that the camera can be accessed. Streaming will most likely only work in the "JavaScript" tab.
+
+## Testing
 
 For testing you can set `mjpg_input` to:
 > input_file.so -f /www_mjpg -e