commit 63889740749ccde4ec479e602c94732a50579b56 Author: gronod Date: Fri Mar 13 14:35:50 2026 +0000 . diff --git a/Arduino_GFX_databus.h b/Arduino_GFX_databus.h new file mode 100644 index 0000000..563c784 --- /dev/null +++ b/Arduino_GFX_databus.h @@ -0,0 +1,86 @@ +// General software SPI +// Arduino_DataBus *bus = new Arduino_SWSPI(TFT_DC, TFT_CS, 18 /* SCK */, 23 /* MOSI */, GFX_NOT_DEFINED /* MISO */); + +// hardware SPI (default DataBus, comment below block if you are not using hardware SPI) +#if defined(ARDUINO_ARCH_NRF52840) +// Arduino_DataBus *bus = new Arduino_mbedSPI(TFT_DC, TFT_CS); +Arduino_DataBus *bus = new Arduino_NRFXSPI(TFT_DC, TFT_CS, 13 /* SCK */, 11 /* MOSI */, 12 /* MISO */); +#elif defined(TARGET_RP2040) +Arduino_DataBus *bus = new Arduino_RPiPicoSPI(TFT_DC /* DC */, TFT_CS /* CS */, 18 /* SCK */, 19 /* MOSI */, 16 /* MISO */, spi0 /* spi */); +#elif defined(ESP32) && (CONFIG_IDF_TARGET_ESP32) +Arduino_DataBus *bus = new Arduino_ESP32SPI(TFT_DC, TFT_CS, 18 /* SCK */, 23 /* MOSI */, GFX_NOT_DEFINED /* MISO */, VSPI /* spi_num */); +#elif defined(ESP32) && (CONFIG_IDF_TARGET_ESP32S2 || CONFIG_IDF_TARGET_ESP32S3) +Arduino_DataBus *bus = new Arduino_ESP32SPI(TFT_DC, TFT_CS, 36 /* SCK */, 35 /* MOSI */, GFX_NOT_DEFINED /* MISO */, HSPI /* spi_num */); +#elif defined(ESP32) && (CONFIG_IDF_TARGET_ESP32C3) +Arduino_DataBus *bus = new Arduino_ESP32SPI(TFT_DC, TFT_CS, 4 /* SCK */, 6 /* MOSI */, GFX_NOT_DEFINED /* MISO */, FSPI /* spi_num */); +#elif defined(ESP8266) +Arduino_DataBus *bus = new Arduino_ESP8266SPI(TFT_DC, TFT_CS); +#else +// General hardware SPI +Arduino_DataBus *bus = new Arduino_HWSPI(TFT_DC, TFT_CS); +#endif + +// General Software parallel 8-bit +// Arduino_DataBus *bus = new Arduino_SWPAR8(A2 /* DC */, A3 /* CS */, A1 /* WR */, A0 /* RD */, 8 /* D0 */, 9 /* D1 */, 2 /* D2 */, 3 /* D3 */, 4 /* D4 */, 5 /* D5 */, 6 /* D6 */, 7 /* D7 */); + +// General Software parallel 16-bit +// Arduino_DataBus *bus = new Arduino_SWPAR16(32 /* DC */, GFX_NOT_DEFINED /* CS */, 21 /* WR */, GFX_NOT_DEFINED /* RD */, 19 /* D0 */, 23 /* D1 */, 18 /* D2 */, 5 /* D3 */, 17 /* D4 */, 16 /* D5 */, 25 /* D6 */, 26 /* D7 */, 27 /* D8 */, 14 /* D9 */, 12 /* D10 */, 13 /* D11 */, 15 /* D12 */, 2 /* D13 */, 0 /* D14 */, 4 /* D15 */); + +// Arduino UNO / UNO R4 MINIMA / UNO R4 WIFI parallel 8-bit +// Arduino_DataBus *bus = new Arduino_UNOPAR8(); + +// AVR PORT parallel 8-bit +// Arduino Pro Micro port 2(PB): 17, 15, 16, 14, 8, 9, 10, 11 +// Arduino_DataBus *bus = new Arduino_AVRPAR8(4 /* DC */, 5 /* CS */, 18 /* WR */, 19 /* RD */, 2 /* PORT */); + +// AVR PORT parallel 16-bit +// Arduino MEGA 2560 +// port 3(PC): 37, 36, 35, 34, 33, 32, 31, 30 +// port 1(PA): 22, 23, 24, 25, 26, 27, 28, 29 +// Arduino_DataBus *bus = new Arduino_AVRPAR16(38 /* DC */, 40 /* CS */, 39 /* WR */, 43 /* RD */, 3 /* PORT LOW */, 1 /* PORT HIGH */); + +// ESP32 parallel 8-bit +// Arduino_DataBus *bus = new Arduino_ESP32PAR8(TFT_DC, TFT_CS, 25 /* WR */, 32 /* RD */, 23 /* D0 */, 19 /* D1 */, 18 /* D2 */, 26 /* D3 */, 21 /* D4 */, 4 /* D5 */, 0 /* D6 */, 2 /* D7 */); + +// ESP32 parallel 16-bit +// Almost all GPIO 0-31 used up for 16-bit and WR, disable PSRAM to gain 16 and 17 but still no GPIOs remain for CS and RD. +// CS connect to GND (enable); RD connect to Vcc (disable). +// Arduino_DataBus *bus = new Arduino_ESP32PAR16( +// 32 /* DC */, GFX_NOT_DEFINED /* CS */, 21 /* WR */, GFX_NOT_DEFINED /* RD */, +// 19 /* D0 */, 23 /* D1 */, 18 /* D2 */, 5 /* D3 */, 17 /* D4 */, 16 /* D5 */, 25 /* D6 */, 26 /* D7 */, +// 27 /* D8 */, 14 /* D9 */, 12 /* D10 */, 13 /* D11 */, 15 /* D12 */, 2 /* D13 */, 0 /* D14 */, 4 /* D15 */); + +// ESP32 QSPI +// Arduino_DataBus *bus = new Arduino_ESP32QSPI( +// 10 /* CS */, 5 /* SCK */, 14 /* D0 */, 8 /* D1 */, 0 /* D2 */, 1 /* D3 */); + +// ESP32S2 parallel 8-bit +// Display D0-D7 connect to GPIO 0-7 +// Arduino_DataBus *bus = new Arduino_ESP32S2PAR8(TFT_DC, TFT_CS, 16 /* WR */, 17 /* RD */); + +// ESP32S2 parallel 16-bit +// Display D0-D15 connect to GPIO 0-15 +// Arduino_DataBus *bus = new Arduino_ESP32S2PAR16(TFT_DC, TFT_CS, 16 /* WR */, 17 /* RD */); + +// ESP32S3 i80 LCD parallel 8-bit +// Arduino_DataBus *bus = new Arduino_ESP32LCD8( +// TFT_DC, TFT_CS, 16 /* WR */, 17 /* RD */, +// 0 /* D0 */, 1 /* D1 */, 2 /* D2 */, 3 /* D3 */, 4 /* D4 */, 5 /* D5 */, 6 /* D6 */, 7 /* D7 */); + +// ESP32S3 i80 LCD parallel 16-bit +// Arduino_DataBus *bus = new Arduino_ESP32LCD16( +// TFT_DC, TFT_CS, 16 /* WR */, 17 /* RD */, +// 0 /* D0 */, 1 /* D1 */, 2 /* D2 */, 3 /* D3 */, 4 /* D4 */, 5 /* D5 */, 6 /* D6 */, 7 /* D7 */, +// 8 /* D8 */, 9 /* D9 */, 10 /* D10 */, 11 /* D11 */, 12 /* D12 */, 13 /* D13 */, 14 /* D14 */, 15 /* D15 */); + +// Raspberry Pi Pico parallel 8-bit +// Display D0-D7 connect to GPIO 0-7 +// Arduino_DataBus *bus = new Arduino_RPiPicoPAR8(TFT_DC, TFT_CS, 18 /* WR */, 19 /* RD */); + +// Raspberry Pi Pico parallel 16-bit +// Display D0-D15 connect to GPIO 0-15 +// Arduino_DataBus *bus = new Arduino_RPiPicoPAR16(TFT_DC, TFT_CS, 18 /* WR */, 19 /* RD */); + +// RTL8722 parallel 8-bit +// Reduce GPIO usage: CS connect to GND (enable); RD connect to Vcc (disable); No Backlight pins. +// Arduino_DataBus *bus = new Arduino_RTLPAR8(0 /* DC */, GFX_NOT_DEFINED /* CS */, 1 /* WR */, GFX_NOT_DEFINED /* RD */, 18 /* D0 */, 22 /* D1 */, 17 /* D2 */, 20 /* D3 */, 19 /* D4 */, 23 /* D5 */, 21 /* D6 */, 16 /* D7 */); diff --git a/Arduino_GFX_dev_device.h b/Arduino_GFX_dev_device.h new file mode 100644 index 0000000..b84b326 --- /dev/null +++ b/Arduino_GFX_dev_device.h @@ -0,0 +1,626 @@ +// #define DLC35010R // or called "Elecrow ESP Terminal with 3.5inch Parallel RGB Capacitive Touch Display (ILI9488)" +// #define DRAGON_RADAR +// #define ESP32_1732S019 +// #define ESP32_2424012 +// #define ESP32_2432S028 +// #define ESP32_3248S035 +// #define ESP32_4827A043 + #define ESP32_4827A043_QSPI +// #define ESP32_4827S043 +// #define ESP32_8048S043 +// #define ESP32_8048S070 +// #define ESP32_LCDKIT_SPI +// #define ESP32_LCDKIT_PAR8A +// #define ESP32_LCDKIT_PAR8B +// #define ESP32_LCDKIT_PAR16 +// #define ESP32_S3_BOX_3 +// #define ESP32_S3_EYE +// #define ESP32_S3_RGB +// #define ESP32_S3_RPI_DPI +// #define ESP32S3_2_1_TP +// #define JC3248W535 +// #define LILYGO_T_DECK +// #define LILYGO_T_DISPLAY +// #define LILYGO_T_DISPLAY_S3 +// #define LILYGO_T_Display_S3_AMOLED +// #define LILYGO_T_DISPLAY_S3_PRO +// #define LILYGO_T_QT +// #define LILYGO_T_RGB +// #define LILYGO_T_TRACK +// #define LILYGO_T_WATCH_2021 +// #define MAKERFABS_TFT_TOUCH_3_5 +// #define MAKERFABS_ESP32_S3_TFT_4_0 +// #define MAKERFABS_ESP32_S3_TFT_4_3_v1_3 +// #define WT32_SC01 +// #define XIAO_SAMD21_ROUND_DISPLAY +// #define XIAO_ESP32C3_ROUND_DISPLAY +// #define XIAO_ESP32S3_ROUND_DISPLAY +// #define WZ8048C050 // or called "Elecrow Wizee-ESP32" +// #define ZX2D10GE10R_V4848 +// #define ZX3D50CE02S // or called "WT32-SC01 PLUS" +// #define ZX3D95CE01S_AR +// #define ZX3D95CE01S_TR +// #define ZX7D00CE01S // or called "QM Smart Panlee 7.0 inch serial screen" + +#if defined(DLC35010R) +#define GFX_DEV_DEVICE DLC35010R +#define GFX_BL 46 +Arduino_DataBus *bus = new Arduino_ESP32PAR16( + 45 /* DC */, GFX_NOT_DEFINED /* CS */, 18 /* WR */, 48 /* RD */, + 47 /* D0 */, 21 /* D1 */, 14 /* D2 */, 13 /* D3 */, 12 /* D4 */, 11 /* D5 */, 10 /* D6 */, 9 /* D7 */, + 3 /* D8 */, 8 /* D9 */, 16 /* D10 */, 15 /* D11 */, 7 /* D12 */, 6 /* D13 */, 5 /* D14 */, 4 /* D15 */); +Arduino_GFX *gfx = new Arduino_ILI9488(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, false /* IPS */); + +#elif defined(DRAGON_RADAR) +#define GFX_DEV_DEVICE DRAGON_RADAR +#define GFX_BL 38 +Arduino_DataBus *bus = new Arduino_SWSPI( + GFX_NOT_DEFINED /* DC */, 39 /* CS */, + 48 /* SCK */, 47 /* MOSI */, GFX_NOT_DEFINED /* MISO */); +Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel( + 18 /* DE */, 17 /* VSYNC */, 16 /* HSYNC */, 21 /* PCLK */, + 11 /* R0 */, 12 /* R1 */, 13 /* R2 */, 45 /* R3 */, 0 /* R4 */, + 8 /* G0 */, 19 /* G1 */, 20 /* G2 */, 46 /* G3 */, 9 /* G4 */, 10 /* G5 */, + 4 /* B0 */, 5 /* B1 */, 6 /* B2 */, 7 /* B3 */, 15 /* B4 */, + 1 /* hsync_polarity */, 50 /* hsync_front_porch */, 1 /* hsync_pulse_width */, 30 /* hsync_back_porch */, + 1 /* vsync_polarity */, 20 /* vsync_front_porch */, 1 /* vsync_pulse_width */, 30 /* vsync_back_porch */); +Arduino_RGB_Display *gfx = new Arduino_RGB_Display( + 480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */, + bus, GFX_NOT_DEFINED /* RST */, st7701_type6_init_operations, sizeof(st7701_type6_init_operations)); + +#elif defined(ESP32_1732S019) +#define GFX_DEV_DEVICE ESP32_1732S019 +#define GFX_BL 14 +Arduino_DataBus *bus = new Arduino_ESP32SPI(11 /* DC */, 10 /* CS */, 12 /* SCK */, 13 /* MOSI */, GFX_NOT_DEFINED /* MISO */); +Arduino_GFX *gfx = new Arduino_ST7789(bus, 1 /* RST */, 0 /* rotation */, true /* IPS */, 170 /* width */, 320 /* height */, 35 /* col offset 1 */, 0 /* row offset 1 */, 35 /* col offset 2 */, 0 /* row offset 2 */); + +#elif defined(ESP32_2424012) +#define GFX_DEV_DEVICE ESP32_2424012 +#define GFX_BL 8 +Arduino_DataBus *bus = new Arduino_ESP32SPI(2 /* DC */, 10 /* CS */, 6 /* SCK */, 7 /* MOSI */, GFX_NOT_DEFINED /* MISO */); +Arduino_GFX *gfx = new Arduino_GC9A01(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, true /* IPS */); + +#elif defined(ESP32_2432S028) +#define GFX_DEV_DEVICE ESP32_2432S028 +#define GFX_BL 21 +Arduino_DataBus *bus = new Arduino_ESP32SPI(2 /* DC */, 15 /* CS */, 14 /* SCK */, 13 /* MOSI */, 12 /* MISO */); +Arduino_GFX *gfx = new Arduino_ILI9341(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */); + +#elif defined(ESP32_3248S035) +#define GFX_DEV_DEVICE ESP32_3248S035 +#define GFX_BL 27 +Arduino_DataBus *bus = new Arduino_ESP32SPI(2 /* DC */, 15 /* CS */, 14 /* SCK */, 13 /* MOSI */, 12 /* MISO */, VSPI /* spi_num */); +Arduino_GFX *gfx = new Arduino_ST7796(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */); + +#elif defined(ESP32_4827A043) +#define GFX_DEV_DEVICE ESP32_4827A043 +#define GFX_BL 2 +Arduino_DataBus *bus = new Arduino_ESP32LCD16( + 48 /* DC */, 45 /* CS */, 47 /* WR */, 21 /* RD */, + 5 /* D0 */, 6 /* D1 */, 7 /* D2 */, 15 /* D3 */, 16 /* D4 */, 4 /* D5 */, 8 /* D6 */, 3 /* D7 */, + 46 /* D8 */, 9 /* D9 */, 1 /* D10 */, 42 /* D11 */, 39 /* D12 */, 41 /* D13 */, 40 /* D14 */, 14 /* D15 */); +Arduino_GFX *gfx = new Arduino_NV3041A(bus, 17 /* RST */, 0 /* rotation */, true /* IPS */); + +#elif defined(ESP32_4827A043_QSPI) +#define GFX_DEV_DEVICE ESP32_4827A043_QSPI +#define GFX_BL 1 +Arduino_DataBus *bus = new Arduino_ESP32QSPI( + 45 /* cs */, 47 /* sck */, 21 /* d0 */, 48 /* d1 */, 40 /* d2 */, 39 /* d3 */); +Arduino_GFX *g = new Arduino_NV3041A(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, true /* IPS */); +Arduino_GFX *gfx = new Arduino_Canvas(480 /* width */, 272 /* height */, g); +#define CANVAS + +#elif defined(ESP32_4827S043) +#define GFX_DEV_DEVICE ESP32_4827S043 +#define GFX_BL 2 +// option 1: +// Uncomment for ILI6485 LCD 480x272 +Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel( + 40 /* DE */, 41 /* VSYNC */, 39 /* HSYNC */, 42 /* PCLK */, + 45 /* R0 */, 48 /* R1 */, 47 /* R2 */, 21 /* R3 */, 14 /* R4 */, + 5 /* G0 */, 6 /* G1 */, 7 /* G2 */, 15 /* G3 */, 16 /* G4 */, 4 /* G5 */, + 8 /* B0 */, 3 /* B1 */, 46 /* B2 */, 9 /* B3 */, 1 /* B4 */, + 0 /* hsync_polarity */, 1 /* hsync_front_porch */, 1 /* hsync_pulse_width */, 43 /* hsync_back_porch */, + 0 /* vsync_polarity */, 3 /* vsync_front_porch */, 1 /* vsync_pulse_width */, 12 /* vsync_back_porch */, + 1 /* pclk_active_neg */, 10000000 /* prefer_speed */); +Arduino_RGB_Display *gfx = new Arduino_RGB_Display( + 480 /* width */, 272 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */); +// option 2: +// Uncomment for ST7262 IPS LCD 800x480 +// Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel( +// 40 /* DE */, 41 /* VSYNC */, 39 /* HSYNC */, 42 /* PCLK */, +// 45 /* R0 */, 48 /* R1 */, 47 /* R2 */, 21 /* R3 */, 14 /* R4 */, +// 5 /* G0 */, 6 /* G1 */, 7 /* G2 */, 15 /* G3 */, 16 /* G4 */, 4 /* G5 */, +// 8 /* B0 */, 3 /* B1 */, 46 /* B2 */, 9 /* B3 */, 1 /* B4 */, +// 0 /* hsync_polarity */, 8 /* hsync_front_porch */, 4 /* hsync_pulse_width */, 8 /* hsync_back_porch */, +// 0 /* vsync_polarity */, 8 /* vsync_front_porch */, 4 /* vsync_pulse_width */, 8 /* vsync_back_porch */, +// 1 /* pclk_active_neg */, 16000000 /* prefer_speed */); +// Arduino_RGB_Display *gfx = new Arduino_RGB_Display( +// 800 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */); +// option 3: +// Uncomment for RPi DPI 1024x600 +// Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel( +// 40 /* DE */, 41 /* VSYNC */, 39 /* HSYNC */, 42 /* PCLK */, +// 45 /* R0 */, 48 /* R1 */, 47 /* R2 */, 21 /* R3 */, 14 /* R4 */, +// 5 /* G0 */, 6 /* G1 */, 7 /* G2 */, 15 /* G3 */, 16 /* G4 */, 4 /* G5 */, +// 8 /* B0 */, 3 /* B1 */, 46 /* B2 */, 9 /* B3 */, 1 /* B4 */, +// 0 /* hsync_polarity */, 8 /* hsync_front_porch */, 4 /* hsync_pulse_width */, 43 /* hsync_back_porch */, +// 0 /* vsync_polarity */, 8 /* vsync_front_porch */, 4 /* vsync_pulse_width */, 12 /* vsync_back_porch */, +// 1 /* pclk_active_neg */, 9000000 /* prefer_speed */); +// Arduino_RGB_Display *gfx = new Arduino_RGB_Display( +// 1024 /* width */, 600 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */); + +#elif defined(ESP32_8048S043) +#define GFX_DEV_DEVICE ESP32_8048S043 +#define GFX_BL 2 +Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel( + 40 /* DE */, 41 /* VSYNC */, 39 /* HSYNC */, 42 /* PCLK */, + 45 /* R0 */, 48 /* R1 */, 47 /* R2 */, 21 /* R3 */, 14 /* R4 */, + 5 /* G0 */, 6 /* G1 */, 7 /* G2 */, 15 /* G3 */, 16 /* G4 */, 4 /* G5 */, + 8 /* B0 */, 3 /* B1 */, 46 /* B2 */, 9 /* B3 */, 1 /* B4 */, + 0 /* hsync_polarity */, 8 /* hsync_front_porch */, 4 /* hsync_pulse_width */, 8 /* hsync_back_porch */, + 0 /* vsync_polarity */, 8 /* vsync_front_porch */, 4 /* vsync_pulse_width */, 8 /* vsync_back_porch */, + 1 /* pclk_active_neg */, 16000000 /* prefer_speed */); +Arduino_RGB_Display *gfx = new Arduino_RGB_Display( + 800 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */); + +#elif defined(ESP32_8048S070) +#define GFX_DEV_DEVICE ESP32_8048S070 +#define GFX_BL 2 +Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel( + 41 /* DE */, 40 /* VSYNC */, 39 /* HSYNC */, 42 /* PCLK */, + 14 /* R0 */, 21 /* R1 */, 47 /* R2 */, 48 /* R3 */, 45 /* R4 */, + 9 /* G0 */, 46 /* G1 */, 3 /* G2 */, 8 /* G3 */, 16 /* G4 */, 1 /* G5 */, + 15 /* B0 */, 7 /* B1 */, 6 /* B2 */, 5 /* B3 */, 4 /* B4 */, + 0 /* hsync_polarity */, 180 /* hsync_front_porch */, 30 /* hsync_pulse_width */, 16 /* hsync_back_porch */, + 0 /* vsync_polarity */, 12 /* vsync_front_porch */, 13 /* vsync_pulse_width */, 10 /* vsync_back_porch */); +Arduino_RGB_Display *gfx = new Arduino_RGB_Display( + 800 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */); + +#elif defined(ESP32_LCDKIT_SPI) +#define GFX_DEV_DEVICE ESP32_LCDKIT_SPI +#define GFX_BL 23 +Arduino_DataBus *bus = new Arduino_ESP32SPI(19 /* DC */, 5 /* CS */, 22 /* SCK */, 21 /* MOSI */, 27 /* MISO */); +Arduino_GFX *gfx = new Arduino_ILI9341(bus, 18 /* RST */, 1 /* rotation */); + +#elif defined(ESP32_LCDKIT_PAR8A) +#define GFX_DEV_DEVICE ESP32_LCDKIT_PAR8A +Arduino_DataBus *bus = new Arduino_ESP32PAR8(5 /* DC */, GFX_NOT_DEFINED /* CS */, 18 /* WR */, GFX_NOT_DEFINED /* RD */, 19 /* D0 */, 21 /* D1 */, 0 /* D2 */, 22 /* D3 */, 23 /* D4 */, 33 /* D5 */, 32 /* D6 */, 27 /* D7 */); +Arduino_GFX *gfx = new Arduino_ILI9341(bus, GFX_NOT_DEFINED /* RST */, 1 /* rotation */); + +#elif defined(ESP32_LCDKIT_PAR8B) +#define GFX_DEV_DEVICE ESP32_LCDKIT_PAR8B +Arduino_DataBus *bus = new Arduino_ESP32PAR8(5 /* DC */, GFX_NOT_DEFINED /* CS */, 18 /* WR */, GFX_NOT_DEFINED /* RD */, 25 /* D0 */, 26 /* D1 */, 12 /* D2 */, 13 /* D3 */, 14 /* D4 */, 15 /* D5 */, 2 /* D6 */, 4 /* D7 */); +Arduino_GFX *gfx = new Arduino_ILI9341(bus, GFX_NOT_DEFINED /* RST */, 1 /* rotation */); + +#elif defined(ESP32_LCDKIT_PAR16) +#define GFX_DEV_DEVICE ESP32_LCDKIT_PAR16 +Arduino_DataBus *bus = new Arduino_ESP32PAR16( + 5 /* DC */, GFX_NOT_DEFINED /* CS */, 18 /* WR */, GFX_NOT_DEFINED /* RD */, + 19 /* D0 */, 21 /* D1 */, 0 /* D2 */, 22 /* D3 */, 23 /* D4 */, 33 /* D5 */, 32 /* D6 */, 27 /* D7 */, + 25 /* D8 */, 26 /* D9 */, 12 /* D10 */, 13 /* D11 */, 14 /* D12 */, 15 /* D13 */, 2 /* D14 */, 4 /* D15 */); +Arduino_GFX *gfx = new Arduino_ILI9341(bus, GFX_NOT_DEFINED /* RST */, 1 /* rotation */); + +#elif defined(ESP32_S3_BOX_3) +#define GFX_DEV_DEVICE ARDUINO_ESP32_S3_BOX_3 +#define GFX_BL 47 +Arduino_DataBus *bus = new Arduino_ESP32SPI(4 /* DC */, 5 /* CS */, 7 /* SCK */, 6 /* MOSI */, GFX_NOT_DEFINED /* MISO */); +Arduino_GFX *gfx = new Arduino_ILI9342(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */); + +#elif defined(ESP32_S3_EYE) +#define GFX_DEV_DEVICE ESP32_S3_EYE +#define GFX_EXTRA_PRE_INIT() \ + { \ + pinMode(3 /* camera indicator */, OUTPUT); \ + digitalWrite(3 /* camera indicator */, LOW); \ + pinMode(48 /* BACKLIGHT */, OUTPUT); \ + digitalWrite(48 /* BACKLIGHT */, LOW); \ + } +Arduino_DataBus *bus = new Arduino_ESP32SPI(43 /* DC */, 44 /* CS */, 21 /* SCK */, 47 /* MOSI */, GFX_NOT_DEFINED /* MISO */); +Arduino_GFX *gfx = new Arduino_ST7789(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, true /* IPS */, 240 /* width */, 240 /* height */, 0 /* col offset 1 */, 0 /* row offset 1 */, 0 /* col offset 2 */, 80 /* row offset 2 */); + +#elif defined(ESP32_S3_RGB) +#define GFX_DEV_DEVICE ESP32_S3_RGB +#define GFX_BL 38 +Arduino_DataBus *bus = new Arduino_SWSPI( + GFX_NOT_DEFINED /* DC */, 39 /* CS */, + 48 /* SCK */, 47 /* MOSI */, GFX_NOT_DEFINED /* MISO */); + +// option 1: +// Uncomment for 4" rect display +Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel( + 18 /* DE */, 17 /* VSYNC */, 16 /* HSYNC */, 21 /* PCLK */, + 4 /* R0 */, 3 /* R1 */, 2 /* R2 */, 1 /* R3 */, 0 /* R4 */, + 10 /* G0 */, 9 /* G1 */, 8 /* G2 */, 7 /* G3 */, 6 /* G4 */, 5 /* G5 */, + 15 /* B0 */, 14 /* B1 */, 13 /* B2 */, 12 /* B3 */, 11 /* B4 */, + 1 /* hsync_polarity */, 10 /* hsync_front_porch */, 8 /* hsync_pulse_width */, 50 /* hsync_back_porch */, + 1 /* vsync_polarity */, 10 /* vsync_front_porch */, 8 /* vsync_pulse_width */, 20 /* vsync_back_porch */); +Arduino_RGB_Display *gfx = new Arduino_RGB_Display( + 480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */, + bus, GFX_NOT_DEFINED /* RST */, st7701_type1_init_operations, sizeof(st7701_type1_init_operations)); + +// option 2: +// Uncomment for 2.1" round display +// Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel( +// 18 /* DE */, 17 /* VSYNC */, 16 /* HSYNC */, 21 /* PCLK */, +// 4 /* R0 */, 3 /* R1 */, 2 /* R2 */, 1 /* R3 */, 0 /* R4 */, +// 10 /* G0 */, 9 /* G1 */, 8 /* G2 */, 7 /* G3 */, 6 /* G4 */, 5 /* G5 */, +// 15 /* B0 */, 14 /* B1 */, 13 /* B2 */, 12 /* B3 */, 11 /* B4 */, +// 1 /* hsync_polarity */, 10 /* hsync_front_porch */, 8 /* hsync_pulse_width */, 50 /* hsync_back_porch */, +// 1 /* vsync_polarity */, 10 /* vsync_front_porch */, 8 /* vsync_pulse_width */, 20 /* vsync_back_porch */); +// Arduino_RGB_Display *gfx = new Arduino_RGB_Display( +// 480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */, +// bus, GFX_NOT_DEFINED /* RST */, st7701_type5_init_operations, sizeof(st7701_type5_init_operations)); + +// option 3: +// Uncomment for 2.8" round display +// Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel( +// 18 /* DE */, 17 /* VSYNC */, 16 /* HSYNC */, 21 /* PCLK */, +// 4 /* R0 */, 3 /* R1 */, 2 /* R2 */, 1 /* R3 */, 0 /* R4 */, +// 10 /* G0 */, 9 /* G1 */, 8 /* G2 */, 7 /* G3 */, 6 /* G4 */, 5 /* G5 */, +// 15 /* B0 */, 14 /* B1 */, 13 /* B2 */, 12 /* B3 */, 11 /* B4 */, +// 1 /* hsync_polarity */, 50 /* hsync_front_porch */, 1 /* hsync_pulse_width */, 30 /* hsync_back_porch */, +// 1 /* vsync_polarity */, 20 /* vsync_front_porch */, 1 /* vsync_pulse_width */, 30 /* vsync_back_porch */); +// Arduino_RGB_Display *gfx = new Arduino_RGB_Display( +// 480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */, +// bus, GFX_NOT_DEFINED /* RST */, st7701_type6_init_operations, sizeof(st7701_type6_init_operations)); + +// option 4: +// Uncomment for 2.0" display +// Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel( +// 18 /* DE */, 17 /* VSYNC */, 16 /* HSYNC */, 21 /* PCLK */, +// 4 /* R0 */, 3 /* R1 */, 2 /* R2 */, 1 /* R3 */, 0 /* R4 */, +// 10 /* G0 */, 9 /* G1 */, 8 /* G2 */, 7 /* G3 */, 6 /* G4 */, 5 /* G5 */, +// 15 /* B0 */, 14 /* B1 */, 13 /* B2 */, 12 /* B3 */, 11 /* B4 */, +// 1 /* hsync_polarity */, 10 /* hsync_front_porch */, 8 /* hsync_pulse_width */, 50 /* hsync_back_porch */, +// 1 /* vsync_polarity */, 10 /* vsync_front_porch */, 8 /* vsync_pulse_width */, 20 /* vsync_back_porch */); +// Arduino_RGB_Display *gfx = new Arduino_RGB_Display( +// 480 /* width */, 360 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */, +// bus, GFX_NOT_DEFINED /* RST */, st7701_type8_init_operations, sizeof(st7701_type8_init_operations)); + +// option 5: +// Uncomment for 3.5" display +// Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel( +// 18 /* DE */, 17 /* VSYNC */, 16 /* HSYNC */, 21 /* PCLK */, +// 4 /* R0 */, 3 /* R1 */, 2 /* R2 */, 1 /* R3 */, 0 /* R4 */, +// 10 /* G0 */, 9 /* G1 */, 8 /* G2 */, 7 /* G3 */, 6 /* G4 */, 5 /* G5 */, +// 15 /* B0 */, 14 /* B1 */, 13 /* B2 */, 12 /* B3 */, 11 /* B4 */, +// 1 /* hsync_polarity */, 20 /* hsync_front_porch */, 30 /* hsync_pulse_width */, 38 /* hsync_back_porch */, +// 1 /* vsync_polarity */, 4 /* vsync_front_porch */, 3 /* vsync_pulse_width */, 15 /* vsync_back_porch */, +// 10, 16000000); +// Arduino_RGB_Display *gfx = new Arduino_RGB_Display( +// 640 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */, +// bus, GFX_NOT_DEFINED /* RST */, st7701_type1_init_operations, sizeof(st7701_type1_init_operations)); + +#elif defined(ESP32_S3_RPI_DPI) +#define GFX_DEV_DEVICE ESP32_S3_RPI_DPI +// #define GFX_BL 38 + +// e.g. Waveshare 7" RPi DPI LCD: https://www.waveshare.com/wiki/7inch_LCD_for_Pi +// dpi_timings=1024 1 40 48 128 600 1 13 3 45 0 0 0 60 0 37000000 6 +Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel( + 18 /* DE */, 17 /* VSYNC */, 16 /* HSYNC */, 21 /* PCLK */, + 4 /* R0 */, 3 /* R1 */, 2 /* R2 */, 1 /* R3 */, 0 /* R4 */, + 10 /* G0 */, 9 /* G1 */, 8 /* G2 */, 7 /* G3 */, 6 /* G4 */, 5 /* G5 */, + 15 /* B0 */, 14 /* B1 */, 13 /* B2 */, 12 /* B3 */, 11 /* B4 */, + 1 /* hsync_polarity */, 40 /* hsync_front_porch */, 48 /* hsync_pulse_width */, 128 /* hsync_back_porch */, + 1 /* vsync_polarity */, 13 /* vsync_front_porch */, 3 /* vsync_pulse_width */, 45 /* vsync_back_porch */); +Arduino_RGB_Display *gfx = new Arduino_RGB_Display( + 1024 /* width */, 600 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */); + +#elif defined(ESP32S3_2_1_TP) +#define GFX_DEV_DEVICE ESP32S3_2_1_TP +#define GFX_BL 38 +Arduino_DataBus *bus = new Arduino_SWSPI( + GFX_NOT_DEFINED /* DC */, 39 /* CS */, + 48 /* SCK */, 47 /* MOSI */, GFX_NOT_DEFINED /* MISO */); + +Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel( + 18 /* DE */, 17 /* VSYNC */, 16 /* HSYNC */, 21 /* PCLK */, + 4 /* R0 */, 5 /* R1 */, 6 /* R2 */, 7 /* R3 */, 15 /* R4 */, + 8 /* G0 */, 20 /* G1 */, 3 /* G2 */, 46 /* G3 */, 9 /* G4 */, 10 /* G5 */, + 11 /* B0 */, 12 /* B1 */, 13 /* B2 */, 14 /* B3 */, 0 /* B4 */, + 1 /* hsync_polarity */, 10 /* hsync_front_porch */, 8 /* hsync_pulse_width */, 50 /* hsync_back_porch */, + 1 /* vsync_polarity */, 10 /* vsync_front_porch */, 8 /* vsync_pulse_width */, 20 /* vsync_back_porch */); +Arduino_RGB_Display *gfx = new Arduino_RGB_Display( + 480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */, + bus, GFX_NOT_DEFINED /* RST */, st7701_type5_init_operations, sizeof(st7701_type5_init_operations)); + +#elif defined(JC3248W535) +#define GFX_DEV_DEVICE JC3248W535 +#define GFX_BL 1 +Arduino_DataBus *bus = new Arduino_ESP32QSPI( + 45 /* cs */, 47 /* sck */, 21 /* d0 */, 48 /* d1 */, 40 /* d2 */, 39 /* d3 */); +Arduino_GFX *g = new Arduino_AXS15231B(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, false /* IPS */); +Arduino_GFX *gfx = new Arduino_Canvas(320 /* width */, 480 /* height */, g); +#define CANVAS + +#elif defined(LILYGO_T_DECK) +#define GFX_DEV_DEVICE LILYGO_T_DECK +#define GFX_EXTRA_PRE_INIT() \ + { \ + pinMode(39 /* TDECK_SDCARD_CS */, OUTPUT); \ + digitalWrite(39 /* TDECK_SDCARD_CS */, HIGH); \ + pinMode(9 /* TDECK_RADIO_CS */, OUTPUT); \ + digitalWrite(9 /* TDECK_RADIO_CS */, HIGH); \ + pinMode(10 /* TDECK_PERI_POWERON */, OUTPUT); \ + digitalWrite(10 /* TDECK_PERI_POWERON */, HIGH); \ + delay(500); \ + } +#define GFX_BL 42 +Arduino_DataBus *bus = new Arduino_ESP32SPI(11 /* DC */, 12 /* CS */, 40 /* SCK */, 41 /* MOSI */, 38 /* MISO */); +Arduino_GFX *gfx = new Arduino_ST7789(bus, GFX_NOT_DEFINED /* RST */, 1 /* rotation */, false /* IPS */); + +#elif defined(LILYGO_T_DISPLAY) +#define GFX_DEV_DEVICE LILYGO_T_DISPLAY +#define GFX_BL 4 +Arduino_DataBus *bus = new Arduino_ESP32SPI(16 /* DC */, 5 /* CS */, 18 /* SCK */, 19 /* MOSI */, GFX_NOT_DEFINED /* MISO */); +Arduino_GFX *gfx = new Arduino_ST7789(bus, 23 /* RST */, 0 /* rotation */, true /* IPS */, 135 /* width */, 240 /* height */, 52 /* col offset 1 */, 40 /* row offset 1 */, 53 /* col offset 2 */, 40 /* row offset 2 */); + +#elif defined(LILYGO_T_DISPLAY_S3) +#define GFX_DEV_DEVICE LILYGO_T_DISPLAY_S3 +#define GFX_EXTRA_PRE_INIT() \ + { \ + pinMode(15 /* PWD */, OUTPUT); \ + digitalWrite(15 /* PWD */, HIGH); \ + } +#define GFX_BL 38 +Arduino_DataBus *bus = new Arduino_ESP32PAR8Q( + 7 /* DC */, 6 /* CS */, 8 /* WR */, 9 /* RD */, + 39 /* D0 */, 40 /* D1 */, 41 /* D2 */, 42 /* D3 */, 45 /* D4 */, 46 /* D5 */, 47 /* D6 */, 48 /* D7 */); +Arduino_GFX *gfx = new Arduino_ST7789(bus, 5 /* RST */, 0 /* rotation */, true /* IPS */, 170 /* width */, 320 /* height */, 35 /* col offset 1 */, 0 /* row offset 1 */, 35 /* col offset 2 */, 0 /* row offset 2 */); + +#elif defined(LILYGO_T_Display_S3_AMOLED) +#define GFX_DEV_DEVICE LILYGO_T_DISPLAY_S3_AMOLED +Arduino_DataBus *bus = new Arduino_ESP32QSPI( + 6 /* cs */, 47 /* sck */, 18 /* d0 */, 7 /* d1 */, 48 /* d2 */, 5 /* d3 */); +Arduino_GFX *gfx = new Arduino_RM67162(bus, 17 /* RST */, 0 /* rotation */); + +#elif defined(LILYGO_T_QT) +#define GFX_DEV_DEVICE LILYGO_T_QT +#define GFX_EXTRA_PRE_INIT() \ + { \ + pinMode(10 /* BL */, OUTPUT); \ + digitalWrite(10 /* BL */, LOW); \ + } +Arduino_DataBus *bus = new Arduino_ESP32SPI(6 /* DC */, 5 /* CS */, 3 /* SCK */, 2 /* MOSI */, GFX_NOT_DEFINED /* MISO */); +Arduino_GFX *gfx = new Arduino_GC9107(bus, 1 /* RST */, 0 /* rotation */, true /* IPS */); + +#elif defined(LILYGO_T_DISPLAY_S3_PRO) +#define GFX_DEV_DEVICE LILYGO_T_DISPLAY_S3_PRO +#define GFX_BL 48 +Arduino_DataBus *bus = new Arduino_ESP32SPI(9 /* DC */, 39 /* CS */, 18 /* SCK */, 17 /* MOSI */, 8 /* MISO */); +Arduino_GFX *gfx = new Arduino_ST7796(bus, 47 /* RST */, 0 /* rotation */, true /* IPS */, 222 /* width */, 480 /* height */, 49 /* col offset 1 */, 0 /* row offset 1 */, 49 /* col offset 2 */, 0 /* row offset 2 */); + +#elif defined(LILYGO_T_RGB) +#define GFX_DEV_DEVICE LILYGO_T_RGB +#include +#define GFX_EXTRA_PRE_INIT() \ + { \ + Wire.begin(8 /* SDA */, 48 /* SCL */, 800000L /* speed */); \ + } +#define GFX_BL 46 +Arduino_DataBus *bus = new Arduino_XL9535SWSPI(8 /* SDA */, 48 /* SCL */, 2 /* XL PWD */, 3 /* XL CS */, 5 /* XL SCK */, 4 /* XL MOSI */); +Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel( + 45 /* DE */, 41 /* VSYNC */, 47 /* HSYNC */, 42 /* PCLK */, + 21 /* R0 */, 18 /* R1 */, 17 /* R2 */, 16 /* R3 */, 15 /* R4 */, + 14 /* G0 */, 13 /* G1 */, 12 /* G2 */, 11 /* G3 */, 10 /* G4 */, 9 /* G5 */, + 7 /* B0 */, 6 /* B1 */, 5 /* B2 */, 3 /* B3 */, 2 /* B4 */, + 1 /* hsync_polarity */, 50 /* hsync_front_porch */, 1 /* hsync_pulse_width */, 30 /* hsync_back_porch */, + 1 /* vsync_polarity */, 20 /* vsync_front_porch */, 1 /* vsync_pulse_width */, 30 /* vsync_back_porch */, + 1 /* pclk_active_neg */); +Arduino_RGB_Display *gfx = new Arduino_RGB_Display( + 480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */, + bus, GFX_NOT_DEFINED /* RST */, st7701_type4_init_operations, sizeof(st7701_type4_init_operations)); + +#elif defined(LILYGO_T_TRACK) +#define GFX_DEV_DEVICE LILYGO_T_TRACK +#define GFX_EXTRA_PRE_INIT() \ + { \ + pinMode(4 /* POWER */, OUTPUT); \ + digitalWrite(4 /* POWER */, HIGH); \ + } +Arduino_DataBus *bus = new Arduino_ESP32SPIDMA(7 /* DC */, 9 /* CS */, 5 /* SCK */, 6 /* MOSI */, GFX_NOT_DEFINED /* MISO */); +Arduino_G *g = new Arduino_JD9613(bus, 8 /* RST */); +Arduino_GFX *gfx = new Arduino_Canvas(126 /* width */, 294 /* height */, g, 0, 0, 3); +#define CANVAS + +#elif defined(LILYGO_T_WATCH_2021) +#define GFX_DEV_DEVICE LILYGO_T_WATCH_2021 +#define GFX_BL 21 +Arduino_DataBus *bus = new Arduino_ESP32SPI(19 /* DC */, 15 /* CS */, 14 /* SCK */, 13 /* MOSI */, GFX_NOT_DEFINED /* MISO */); +Arduino_GFX *gfx = new Arduino_GC9A01(bus, 27 /* RST */, 0 /* rotation */, true /* IPS */); + +#elif defined(MAKERFABS_TFT_TOUCH_3_5) +#define GFX_DEV_DEVICE MAKERFABS_TFT_TOUCH_3_5 +Arduino_DataBus *bus = new Arduino_ESP32SPI(33 /* DC */, 15 /* CS */, 14 /* SCK */, 13 /* MOSI */, 12 /* MISO */); +Arduino_GFX *gfx = new Arduino_ILI9488_18bit(bus, GFX_NOT_DEFINED /* RST */, 1 /* rotation */, false /* IPS */); + +#elif defined(MAKERFABS_ESP32_S3_TFT_4_0) +#define GFX_DEV_DEVICE MAKERFABS_ESP32_S3_TFT_4_0 +Arduino_DataBus *bus = new Arduino_SWSPI( + GFX_NOT_DEFINED /* DC */, 1 /* CS */, + 12 /* SCK */, 11 /* MOSI */, GFX_NOT_DEFINED /* MISO */); +Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel( + 45 /* DE */, 4 /* VSYNC */, 5 /* HSYNC */, 21 /* PCLK */, + 39 /* R0 */, 40 /* R1 */, 41 /* R2 */, 42 /* R3 */, 2 /* R4 */, + 0 /* G0 */, 9 /* G1 */, 14 /* G2 */, 47 /* G3 */, 48 /* G4 */, 3 /* G5 */, + 6 /* B0 */, 7 /* B1 */, 15 /* B2 */, 16 /* B3 */, 8 /* B4 */, + 1 /* hsync_polarity */, 10 /* hsync_front_porch */, 8 /* hsync_pulse_width */, 50 /* hsync_back_porch */, + 1 /* vsync_polarity */, 10 /* vsync_front_porch */, 8 /* vsync_pulse_width */, 20 /* vsync_back_porch */); +Arduino_RGB_Display *gfx = new Arduino_RGB_Display( + 480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */, + bus, GFX_NOT_DEFINED /* RST */, st7701_type1_init_operations, sizeof(st7701_type1_init_operations)); + +#elif defined(MAKERFABS_ESP32_S3_TFT_4_3_v1_3) +#define GFX_DEV_DEVICE MAKERFABS_ESP32_S3_TFT_4_3_v1_3 +#define GFX_BL 2 +Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel( + 40 /* DE */, 41 /* VSYNC */, 39 /* HSYNC */, 42 /* PCLK */, + 45 /* R0 */, 48 /* R1 */, 47 /* R2 */, 21 /* R3 */, 14 /* R4 */, + 5 /* G0 */, 6 /* G1 */, 7 /* G2 */, 15 /* G3 */, 16 /* G4 */, 4 /* G5 */, + 8 /* B0 */, 3 /* B1 */, 46 /* B2 */, 9 /* B3 */, 1 /* B4 */, + 0 /* hsync_polarity */, 40 /* hsync_front_porch */, 48 /* hsync_pulse_width */, 88 /* hsync_back_porch */, + 0 /* vsync_polarity */, 13 /* vsync_front_porch */, 3 /* vsync_pulse_width */, 32 /* vsync_back_porch */, + 1 /* pclk_active_neg */, 16000000 /* prefer_speed */); +Arduino_RGB_Display *gfx = new Arduino_RGB_Display( + 800 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */); + +#elif defined(WT32_SC01) +#define GFX_DEV_DEVICE WT32_SC01 +#define GFX_BL 23 +Arduino_DataBus *bus = new Arduino_ESP32SPI(21 /* DC */, 15 /* CS */, 14 /* SCK */, 13 /* MOSI */, GFX_NOT_DEFINED /* MISO */); +Arduino_GFX *gfx = new Arduino_ST7796(bus, 22 /* RST */, 3 /* rotation */); + +#elif defined(WZ8048C050) +#define GFX_DEV_DEVICE WZ8048C050 +#define GFX_BL 2 +// ILI6122 +Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel( + 40 /* DE */, 41 /* VSYNC */, 39 /* HSYNC */, 0 /* PCLK */, + 45 /* R0 */, 48 /* R1 */, 47 /* R2 */, 21 /* R3 */, 14 /* R4 */, + 5 /* G0 */, 6 /* G1 */, 7 /* G2 */, 15 /* G3 */, 16 /* G4 */, 4 /* G5 */, + 8 /* B0 */, 3 /* B1 */, 46 /* B2 */, 9 /* B3 */, 1 /* B4 */, + 0 /* hsync_polarity */, 8 /* hsync_front_porch */, 1 /* hsync_pulse_width */, 32 /* hsync_back_porch */, + 0 /* vsync_polarity */, 8 /* vsync_front_porch */, 1 /* vsync_pulse_width */, 8 /* vsync_back_porch */, + 1 /* pclk_active_neg */, 16000000 /* prefer_speed */); +Arduino_RGB_Display *gfx = new Arduino_RGB_Display( + 800 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */); + +#elif defined(XIAO_SAMD21_ROUND_DISPLAY) +#define GFX_DEV_DEVICE XIAO_SAMD21_ROUND_DISPLAY +Arduino_DataBus *bus = new Arduino_HWSPI(3 /* DC */, 1 /* CS */); +Arduino_GFX *gfx = new Arduino_GC9A01(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, true /* IPS */); + +#elif defined(XIAO_ESP32C3_ROUND_DISPLAY) +#define GFX_DEV_DEVICE XIAO_ESP32C3_ROUND_DISPLAY +Arduino_DataBus *bus = new Arduino_ESP32SPI(5 /* DC */, 3 /* CS */, 8 /* SCK */, 10 /* MOSI */, 9 /* MISO */); +Arduino_GFX *gfx = new Arduino_GC9A01(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, true /* IPS */); + +#elif defined(XIAO_ESP32S3_ROUND_DISPLAY) +#define GFX_DEV_DEVICE XIAO_ESP32S3_ROUND_DISPLAY +Arduino_DataBus *bus = new Arduino_ESP32SPI(4 /* DC */, 2 /* CS */, 7 /* SCK */, 9 /* MOSI */, 8 /* MISO */); +Arduino_GFX *gfx = new Arduino_GC9A01(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, true /* IPS */); + +#elif defined(ZX2D10GE10R_V4848) +#define GFX_DEV_DEVICE ZX2D10GE10R_V4848 +#define GFX_BL 38 +Arduino_DataBus *bus = new Arduino_SWSPI( + GFX_NOT_DEFINED /* DC */, 21 /* CS */, + 47 /* SCK */, 41 /* MOSI */, GFX_NOT_DEFINED /* MISO */); +Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel( + 39 /* DE */, 48 /* VSYNC */, 40 /* HSYNC */, 45 /* PCLK */, + 10 /* R0 */, 16 /* R1 */, 9 /* R2 */, 15 /* R3 */, 46 /* R4 */, + 8 /* G0 */, 13 /* G1 */, 18 /* G2 */, 12 /* G3 */, 11 /* G4 */, 17 /* G5 */, + 47 /* B0 */, 41 /* B1 */, 0 /* B2 */, 42 /* B3 */, 14 /* B4 */, + 1 /* hsync_polarity */, 10 /* hsync_front_porch */, 10 /* hsync_pulse_width */, 10 /* hsync_back_porch */, + 1 /* vsync_polarity */, 14 /* vsync_front_porch */, 2 /* vsync_pulse_width */, 12 /* vsync_back_porch */); +Arduino_RGB_Display *gfx = new Arduino_RGB_Display( + 480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */, + bus, GFX_NOT_DEFINED /* RST */, st7701_type7_init_operations, sizeof(st7701_type7_init_operations)); + +#elif defined(ZX3D50CE02S) +#define GFX_DEV_DEVICE ZX3D50CE02S +#define GFX_BL 45 +Arduino_DataBus *bus = new Arduino_ESP32LCD8( + 0 /* DC */, GFX_NOT_DEFINED /* CS */, 47 /* WR */, GFX_NOT_DEFINED /* RD */, + 9 /* D0 */, 46 /* D1 */, 3 /* D2 */, 8 /* D3 */, 18 /* D4 */, 17 /* D5 */, 16 /* D6 */, 15 /* D7 */); +Arduino_GFX *gfx = new Arduino_ST7796(bus, 4 /* RST */, 0 /* rotation */, true /* IPS */); + +#elif defined(ZX3D95CE01S_AR) +#define GFX_DEV_DEVICE ZX3D95CE01S_AR +#define GFX_BL 45 +Arduino_DataBus *bus = new Arduino_SWSPI( + GFX_NOT_DEFINED /* DC */, 0 /* CS */, + 10 /* SCK */, 9 /* MOSI */, GFX_NOT_DEFINED /* MISO */); +Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel( + 13 /* DE */, 12 /* VSYNC */, 11 /* HSYNC */, 14 /* PCLK */, + 2 /* R0 */, 17 /* R1 */, 16 /* R2 */, 1 /* R3 */, 15 /* R4 */, + 41 /* G0 */, 46 /* G1 */, 3 /* G2 */, 42 /* G3 */, 8 /* G4 */, 18 /* G5 */, + 10 /* B0 */, 9 /* B1 */, 40 /* B2 */, 20 /* B3 */, 19 /* B4 */, + 1 /* hsync_polarity */, 10 /* hsync_front_porch */, 8 /* hsync_pulse_width */, 50 /* hsync_back_porch */, + 1 /* vsync_polarity */, 10 /* vsync_front_porch */, 8 /* vsync_pulse_width */, 20 /* vsync_back_porch */); +Arduino_RGB_Display *gfx = new Arduino_RGB_Display( + 480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */, + bus, GFX_NOT_DEFINED /* RST */, gc9503v_type1_init_operations, sizeof(gc9503v_type1_init_operations)); + +#elif defined(ZX3D95CE01S_TR) +#define GFX_DEV_DEVICE ZX3D95CE01S_TR +#define GFX_BL 5 +Arduino_DataBus *bus = new Arduino_SWSPI( + GFX_NOT_DEFINED /* DC */, 38 /* CS */, + 45 /* SCK or SCLK */, 48 /* MOSI */, GFX_NOT_DEFINED /* MISO */); +Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel( + 40 /* DE */, 41 /* VSYNC */, 42 /* HSYNC */, 39 /* PCLK */, + 18 /* R0 */, 8 /* R1 */, 3 /* R2 */, 46 /* R3 */, 10 /* R4 */, + 14 /* G0 */, 13 /* G1 */, 12 /* G2 */, 11 /* G3 */, 16 /* G4 */, 17 /* G5 */, + 45 /* B0 */, 48 /* B1 */, 47 /* B2 */, 0 /* B3 */, 21 /* B4 */, + 1 /* hsync_polarity */, 8 /* hsync_front_porch */, 10 /* hsync_pulse_width */, 50 /* hsync_back_porch */, + 1 /* vsync_polarity */, 8 /* vsync_front_porch */, 10 /* vsync_pulse_width */, 20 /* vsync_back_porch */); +Arduino_RGB_Display *gfx = new Arduino_RGB_Display( + 480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */, + bus, 41 /* RST */, gc9503v_type1_init_operations, sizeof(gc9503v_type1_init_operations)); + +#elif defined(ZX7D00CE01S) +#define GFX_DEV_DEVICE ZX7D00CE01S +#define GFX_BL 45 +Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel( + 39 /* DE */, 38 /* VSYNC */, 5 /* HSYNC */, 9 /* PCLK */, + 10 /* R0 */, 11 /* R1 */, 12 /* R2 */, 13 /* R3 */, 14 /* R4 */, + 21 /* G0 */, 0 /* G1 */, 46 /* G2 */, 3 /* G3 */, 8 /* G4 */, 18 /* G5 */, + 17 /* B0 */, 16 /* B1 */, 15 /* B2 */, 7 /* B3 */, 6 /* B4 */, + 0 /* hsync_polarity */, 0 /* hsync_front_porch */, 210 /* hsync_pulse_width */, 30 /* hsync_back_porch */, + 0 /* vsync_polarity */, 0 /* vsync_front_porch */, 22 /* vsync_pulse_width */, 13 /* vsync_back_porch */); +Arduino_RGB_Display *gfx = new Arduino_RGB_Display( + 800 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */); + +/* Wio Terminal */ +#elif defined(ARDUINO_ARCH_SAMD) && defined(SEEED_GROVE_UI_WIRELESS) +#define GFX_DEV_DEVICE WIO_TERMINAL +// #define GFX_BL LCD_BACKLIGHT +Arduino_DataBus *bus = new Arduino_HWSPI(LCD_DC /* DC */, LCD_SS_PIN /* CS */); +Arduino_GFX *gfx = new Arduino_ILI9341(bus, GFX_NOT_DEFINED /* RST */, 1 /* rotation */); + +/* ESP32-S3-BOX */ +#elif defined(ARDUINO_ESP32_S3_BOX) +#define GFX_DEV_DEVICE ARDUINO_ESP32_S3_BOX +#define GFX_BL 45 +Arduino_DataBus *bus = new Arduino_ESP32SPI(4 /* DC */, 5 /* CS */, 7 /* SCK */, 6 /* MOSI */, 0 /* MISO */); +Arduino_GFX *gfx = new Arduino_ILI9342(bus, 48 /* RST */, 0 /* rotation */); + +/* M5Stack */ +#elif defined(ARDUINO_M5Stack_Core_ESP32) || defined(ARDUINO_M5STACK_FIRE) +#define GFX_DEV_DEVICE ARDUINO_M5Stack_Core_ESP32 +// #define GFX_BL 32 +Arduino_DataBus *bus = new Arduino_ESP32SPI(27 /* DC */, 14 /* CS */, SCK, MOSI, MISO); +Arduino_GFX *gfx = new Arduino_ILI9342(bus, 33 /* RST */, 2 /* rotation */); + +#elif defined(ARDUINO_M5Stack_ATOMS3) +#define GFX_DEV_DEVICE ARDUINO_M5Stack_ATOMS3 +#define GFX_BL 16 +Arduino_DataBus *bus = new Arduino_ESP32SPI(33 /* DC */, 15 /* CS */, 17 /* SCK */, 21 /* MOSI */, GFX_NOT_DEFINED /* MISO */); +Arduino_GFX *gfx = new Arduino_GC9107(bus, 34 /* RST */, 0 /* rotation */, true /* IPS */); + +/* Odroid-Go */ +#elif defined(ARDUINO_ODROID_ESP32) +#define GFX_DEV_DEVICE ARDUINO_ODROID_ESP32 +// #define GFX_BL 14 +Arduino_DataBus *bus = new Arduino_ESP32SPI(21 /* DC */, 5 /* CS */, SCK, MOSI, MISO); +Arduino_GFX *gfx = new Arduino_ILI9341(bus, GFX_NOT_DEFINED /* RST */, 3 /* rotation */); +// Arduino_ST7789 *gfx = new Arduino_ST7789(bus, GFX_NOT_DEFINED /* RST */, 3 /* rotation */, true /* IPS */); + +/* LILYGO T-Watch */ +#elif defined(ARDUINO_T) || defined(ARDUINO_TWATCH_BASE) || defined(ARDUINO_TWATCH_2020_V1) || defined(ARDUINO_TWATCH_2020_V2) +#define GFX_DEV_DEVICE ARDUINO_T_WATCH +#define GFX_BL 12 +Arduino_DataBus *bus = new Arduino_ESP32SPI(27 /* DC */, 5 /* CS */, 18 /* SCK */, 19 /* MOSI */, GFX_NOT_DEFINED /* MISO */); +Arduino_GFX *gfx = new Arduino_ST7789(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, true /* IPS */, 240 /* width */, 240 /* height */, 0 /* col offset 1 */, 0 /* row offset 1 */, 0 /* col offset 2 */, 80 /* row offset 2 */); + +/* Waveshare RP2040-LCD-1.28 */ +#elif defined(ARDUINO_WAVESHARE_RP2040_LCD_1_28) +#define GFX_DEV_DEVICE ARDUINO_WAVESHARE_RP2040_LCD_1_28 +#define GFX_BL 25 +Arduino_DataBus *bus = new Arduino_RPiPicoSPI(8 /* DC */, 9 /* CS */, 10 /* SCK */, 11 /* MOSI */, 12 /* MISO */, spi1 /* spi */); +Arduino_GFX *gfx = new Arduino_GC9A01(bus, 12 /* RST */, 0 /* rotation */, true /* IPS */); + +#endif diff --git a/Arduino_GFX_display.h b/Arduino_GFX_display.h new file mode 100644 index 0000000..2ee1e73 --- /dev/null +++ b/Arduino_GFX_display.h @@ -0,0 +1,158 @@ +/*************************************** + * Start of Canvas (framebuffer) + **************************************/ +// #define CANVAS + +// 16-bit color Canvas (240x320 resolution only works for ESP32 with PSRAM) +// Arduino_G *output_display = new Arduino_ST7789(bus, TFT_RST, 0 /* rotation */, true /* IPS */); +// Arduino_GFX *gfx = new Arduino_Canvas(240 /* width */, 320 /* height */, output_display); + +// Indexed color Canvas, mask_level: 0-2, larger mask level mean less color variation but can have faster index mapping +// Arduino_G *output_display = new Arduino_ST7789(bus, TFT_RST, 0 /* rotation */, true /* IPS */); +// Arduino_GFX *gfx = new Arduino_Canvas_Indexed(240 /* width */, 320 /* height */, output_display, 0 /* output_x */, 0 /* output_y */, MAXMASKLEVEL /* mask_level */); + +// 3-bit color Canvas, R1G1B1, 8 colors +// Arduino_G *output_display = new Arduino_ILI9488_3bit(bus, GFX_NOT_DEFINED /* RST */, 1 /* rotation */, false /* IPS */); +// Arduino_GFX *gfx = new Arduino_Canvas_3bit(480 /* width */, 320 /* height */, output_display, 0 /* output_x */, 0 /* output_y */); + +// Mono color Canvas +// Arduino_G *output_display = new Arduino_ST7789(bus, TFT_RST, 0 /* rotation */, true /* IPS */); +// Arduino_GFX *gfx = new Arduino_Canvas_Mono(240 /* width */, 320 /* height */, output_display, 0 /* output_x */, 0 /* output_y */); +/*************************************** + * End of Canvas (framebuffer) + **************************************/ + +// GC9A01 IPS LCD 240x240 +// Arduino_GFX *gfx = new Arduino_GC9A01(bus, TFT_RST, 0 /* rotation */, true /* IPS */); + +// GC9106 IPS LCD 80x160 +// Arduino_GFX *gfx = new Arduino_GC9106(bus, TFT_RST, 0 /* rotation */, true /* IPS */); + +// GC9107 IPS LCD 128x128 +// Arduino_GFX *gfx = new Arduino_GC9107(bus, TFT_RST, 0 /* rotation */, true /* IPS */); + +// HX8347C IPS LCD 240x320 +// Arduino_GFX *gfx = new Arduino_HX8347C(bus, TFT_RST, 0 /* rotation */, true /* IPS */); + +// HX8347D IPS LCD 240x320 +// Arduino_GFX *gfx = new Arduino_HX8347D(bus, TFT_RST, 0 /* rotation */, true /* IPS */); + +// HX8352C IPS LCD 240x400 +// Arduino_GFX *gfx = new Arduino_HX8352C(bus, TFT_RST, 0 /* rotation */, true /* IPS */); + +// HX8357A IPS LCD 320x480 (currently only portrait works, i.e. rotation 0 and 2) +// Arduino_GFX *gfx = new Arduino_HX8357A(bus, TFT_RST, 0 /* rotation */, true /* IPS */); + +// HX8357B IPS LCD 320x480 +// Arduino_GFX *gfx = new Arduino_HX8357B(bus, TFT_RST, 0 /* rotation */, true /* IPS */); + +// HX8369A LCD 480x800 +// Arduino_GFX *gfx = new Arduino_HX8369A(bus, TFT_RST, 0 /* rotation */, false /* IPS */, 480, 800, 0, 7, 0, 57); + +// ILI9225 LCD 176x220 +// Arduino_GFX *gfx = new Arduino_ILI9225(bus, TFT_RST); + +// ILI9341 LCD 240x320 (default Display, comment below line if you are not using ILI9341) +Arduino_GFX *gfx = new Arduino_ILI9341(bus, TFT_RST, 0 /* rotation */, false /* IPS */); + +// ILI9342 LCD 320x240 +// Arduino_GFX *gfx = new Arduino_ILI9342(bus, TFT_RST, 0 /* rotation */, false /* IPS */); + +// ILI9481 parallel 8/16-bit LCD 320x480 +// Arduino_GFX *gfx = new Arduino_ILI9481(bus, TFT_RST, 0 /* rotation */, false /* IPS */); + +// ILI9481 SPI LCD 320x480 +// Arduino_GFX *gfx = new Arduino_ILI9481_18bit(bus, TFT_RST, 0 /* rotation */, false /* IPS */); + +// ILI9486 parallel 8/16-bit LCD 320x480 +// Arduino_GFX *gfx = new Arduino_ILI9486(bus, TFT_RST, 0 /* rotation */, false /* IPS */); + +// ILI9486 SPI LCD 320x480 +// Arduino_GFX *gfx = new Arduino_ILI9486_18bit(bus, TFT_RST, 0 /* rotation */, false /* IPS */); + +// ILI9488 parallel 8/16-bit LCD 320x480 +// Arduino_GFX *gfx = new Arduino_ILI9488(bus, TFT_RST, 0 /* rotation */, false /* IPS */); + +// ILI9488 SPI LCD 320x480 +// Arduino_GFX *gfx = new Arduino_ILI9488_18bit(bus, TFT_RST, 0 /* rotation */, false /* IPS */); + +// ILI9806 LCD 480x854 +// Arduino_GFX *gfx = new Arduino_ILI9806(bus, TFT_RST, 0 /* rotation */, false /* IPS */); + +// JBT6K71 LCD 240x320 +// Arduino_GFX *gfx = new Arduino_JBT6K71(bus, TFT_RST, 0 /* rotation */, true /* IPS */, 240, 320, 0, 0, 16, 0); + +// NT35310 LCD 320x480 +// Arduino_GFX *gfx = new Arduino_NT35310(bus, TFT_RST, 0 /* rotation */); + +// NT35510 LCD 480x800 +// Arduino_GFX *gfx = new Arduino_NT35510(bus, TFT_RST, 0 /* rotation */); + +// NT39125 LCD 240x376 +// Arduino_GFX *gfx = new Arduino_NT39125(bus, TFT_RST, 0 /* rotation */, false /* IPS */, 240, 376, 0, 0, 0, 56); + +// NV3041A IPS LCD +// Arduino_GFX *gfx = new Arduino_NV3041A(bus, TFT_RST, 0 /* rotation */, true /* IPS */); + +// OTM8009A LCD 480x800 +// Arduino_GFX *gfx = new Arduino_OTM8009A(bus, TFT_RST, 0 /* rotation */); + +// R61529 IPS LCD 320x480 +// Arduino_GFX *gfx = new Arduino_R61529(bus, TFT_RST, 0 /* rotation */, true /* IPS */); + +// SEPS525 OLED 160x128 +// Arduino_GFX *gfx = new Arduino_SEPS525(bus, TFT_RST, 0 /* rotation */); + +// SSD1283A OLED 130x130 +// Arduino_GFX *gfx = new Arduino_SSD1283A(bus, TFT_RST, 0 /* rotation */); + +// SSD1331 OLED 96x64 +// Arduino_GFX *gfx = new Arduino_SSD1331(bus, TFT_RST, 0 /* rotation */); + +// SSD1351 OLED 128x128 +// Arduino_GFX *gfx = new Arduino_SSD1351(bus, TFT_RST, 0 /* rotation */); + +// ST7735 LCD +// 1.8" REDTAB 128x160 +// Arduino_GFX *gfx = new Arduino_ST7735(bus, TFT_RST, 0 /* rotation */); +// 1.8" BLACKTAB 128x160 +// Arduino_GFX *gfx = new Arduino_ST7735(bus, TFT_RST, 0 /* rotation */, false /* IPS */, 128 /* width */, 160 /* height */, 2 /* col offset 1 */, 1 /* row offset 1 */, 2 /* col offset 2 */, 1 /* row offset 2 */, false /* BGR */); +// 1.8" GREENTAB A 128x160 +// Arduino_GFX *gfx = new Arduino_ST7735(bus, TFT_RST, 0 /* rotation */, false /* IPS */, 128 /* width */, 160 /* height */, 2 /* col offset 1 */, 1 /* row offset 1 */, 2 /* col offset 2 */, 1 /* row offset 2 */); +// 1.8" GREENTAB B 128x160 +// Arduino_GFX *gfx = new Arduino_ST7735(bus, TFT_RST, 0 /* rotation */, false /* IPS */, 128 /* width */, 160 /* height */, 2 /* col offset 1 */, 3 /* row offset 1 */, 2 /* col offset 2 */, 1 /* row offset 2 */); +// 1.8" Wide angle LCD 128x160 +// Arduino_GFX *gfx = new Arduino_ST7735(bus, TFT_RST, 0 /* rotation */, false /* IPS */, 128 /* width */, 160 /* height */, 0 /* col offset 1 */, 0 /* row offset 1 */, 0 /* col offset 2 */, 0 /* row offset 2 */, false /* BGR */); +// 1.5" GREENTAB B 128x128 +// Arduino_GFX *gfx = new Arduino_ST7735(bus, TFT_RST, 0 /* rotation */, false /* IPS */, 128 /* width */, 128 /* height */, 2 /* col offset 1 */, 3 /* row offset 1 */, 2 /* col offset 2 */, 1 /* row offset 2 */); +// 1.5" GREENTAB C 128x128 +// Arduino_GFX *gfx = new Arduino_ST7735(bus, TFT_RST, 0 /* rotation */, false /* IPS */, 128 /* width */, 128 /* height */, 0 /* col offset 1 */, 32 /* row offset 1 */); +// 0.96" IPS LCD 80x160 +// Arduino_GFX *gfx = new Arduino_ST7735(bus, TFT_RST, 0 /* rotation */, true /* IPS */, 80 /* width */, 160 /* height */, 26 /* col offset 1 */, 1 /* row offset 1 */, 26 /* col offset 2 */, 1 /* row offset 2 */); + +// ST7789 LCD +// 2.4" LCD 240x320 +// Arduino_GFX *gfx = new Arduino_ST7789(bus, TFT_RST, 0 /* rotation */); +// 2.4" IPS LCD 240x320 +// Arduino_GFX *gfx = new Arduino_ST7789(bus, TFT_RST, 0 /* rotation */, true /* IPS */); +// 1.9" IPS round corner LCD 170x320 +// Arduino_GFX *gfx = new Arduino_ST7789(bus, TFT_RST, 0 /* rotation */, true /* IPS */, 170 /* width */, 320 /* height */, 35 /* col offset 1 */, 0 /* row offset 1 */, 35 /* col offset 2 */, 0 /* row offset 2 */); +// 1.69" IPS round corner LCD 240x280 +// Arduino_GFX *gfx = new Arduino_ST7789(bus, TFT_RST, 0 /* rotation */, true /* IPS */, 240 /* width */, 280 /* height */, 0 /* col offset 1 */, 20 /* row offset 1 */, 0 /* col offset 2 */, 20 /* row offset 2 */); +// 1.47" IPS round corner LCD 172x320 +// Arduino_GFX *gfx = new Arduino_ST7789(bus, TFT_RST, 0 /* rotation */, true /* IPS */, 172 /* width */, 320 /* height */, 34 /* col offset 1 */, 0 /* row offset 1 */, 34 /* col offset 2 */, 0 /* row offset 2 */); +// 1.3"/1.5" square IPS LCD 240x240 +// Arduino_GFX *gfx = new Arduino_ST7789(bus, TFT_RST, 0 /* rotation */, true /* IPS */, 240 /* width */, 240 /* height */, 0 /* col offset 1 */, 0 /* row offset 1 */, 0 /* col offset 2 */, 80 /* row offset 2 */); +// 1.14" IPS LCD 135x240 +// Arduino_GFX *gfx = new Arduino_ST7789(bus, TFT_RST, 0 /* rotation */, true /* IPS */, 135 /* width */, 240 /* height */, 52 /* col offset 1 */, 40 /* row offset 1 */, 53 /* col offset 2 */, 40 /* row offset 2 */); + +// ST7796 LCD +// 4" LCD 320x480 +// Arduino_GFX *gfx = new Arduino_ST7796(bus, TFT_RST, 0 /* rotation */); +// 4" IPS LCD 320x480 +// Arduino_GFX *gfx = new Arduino_ST7796(bus, TFT_RST, 0 /* rotation */, true /* IPS */); + +// WEA2012 LCD +// #define CANVAS +// Arduino_GFX *output_display = new Arduino_WEA2012(bus, TFT_RST); +// Arduino_GFX *gfx = new Arduino_Canvas(356 /* width */, 400 /* height */, output_display); diff --git a/Arduino_GFX_pins.h b/Arduino_GFX_pins.h new file mode 100644 index 0000000..6bc7df9 --- /dev/null +++ b/Arduino_GFX_pins.h @@ -0,0 +1,74 @@ +#if defined(__IMXRT1052__) || defined(__IMXRT1062__) +// PJRC Teensy 4.x +#define TFT_CS 39 // GFX_NOT_DEFINED for display without CS pin +#define TFT_DC 41 +#define TFT_RST 40 +#define GFX_BL 22 +#elif defined(ARDUINO_BLACKPILL_F411CE) +#define TFT_CS 4 // GFX_NOT_DEFINED for display without CS pin +#define TFT_DC 3 +#define TFT_RST 2 +#define GFX_BL 1 +#elif defined(TARGET_RP2040) +#define TFT_CS 17 // GFX_NOT_DEFINED for display without CS pin +#define TFT_DC 27 +#define TFT_RST 26 +#define GFX_BL 28 +#elif defined(ESP32) && (CONFIG_IDF_TARGET_ESP32) +#define TFT_CS 5 // GFX_NOT_DEFINED for display without CS pin +#define TFT_DC 27 // GFX_NOT_DEFINED for display without DC pin (9-bit SPI) +#define TFT_RST 33 +#define GFX_BL 22 +#elif defined(ESP32) && (CONFIG_IDF_TARGET_ESP32S2) +#define TFT_CS 34 // GFX_NOT_DEFINED for display without CS pin +#define TFT_DC 38 +#define TFT_RST 33 +#define GFX_BL 21 +#elif defined(ESP32) && (CONFIG_IDF_TARGET_ESP32S3) +#define TFT_CS 40 // GFX_NOT_DEFINED for display without CS pin +#define TFT_DC 41 +#define TFT_RST 42 +#define GFX_BL 48 +#elif defined(ESP32) && (CONFIG_IDF_TARGET_ESP32C3) +#define TFT_CS 7 // GFX_NOT_DEFINED for display without CS pin +#define TFT_DC 2 +#define TFT_RST 1 +#define GFX_BL 3 +#elif defined(ESP8266) +#define TFT_CS 15 // GFX_NOT_DEFINED for display without CS pin +#define TFT_DC 4 +#define TFT_RST 2 +#define GFX_BL 5 +#elif defined(RTL8722DM) +#if defined(BOARD_RTL8720DN_BW16) +#define TFT_CS 9 +#define TFT_DC 8 +#define TFT_RST 6 +#define GFX_BL 3 +#elif defined(BOARD_RTL8722DM) +#define TFT_CS 18 +#define TFT_DC 17 +#define TFT_RST 22 +#define GFX_BL 23 +#elif defined(BOARD_RTL8722DM_MINI) +#define TFT_CS 12 +#define TFT_DC 14 +#define TFT_RST 15 +#define GFX_BL 13 +#else // old version +#define TFT_CS 18 // GFX_NOT_DEFINED for display without CS pin +#define TFT_DC 17 +#define TFT_RST 2 +#define GFX_BL 23 +#endif +#elif defined(SEEED_XIAO_M0) +#define TFT_CS 3 // GFX_NOT_DEFINED for display without CS pin +#define TFT_DC 2 +#define TFT_RST 1 +#define GFX_BL 0 +#else +#define TFT_CS 9 // GFX_NOT_DEFINED for display without CS pin +#define TFT_DC 8 +#define TFT_RST 7 +#define GFX_BL 6 +#endif \ No newline at end of file diff --git a/PDQgraphicstest.ino b/PDQgraphicstest.ino new file mode 100644 index 0000000..ef5f6cb --- /dev/null +++ b/PDQgraphicstest.ino @@ -0,0 +1,681 @@ +/* + Adapted from the Adafruit and Xark's PDQ graphicstest sketch. + + See end of file for original header text and MIT license info. +*/ + +/******************************************************************************* + * Start of Arduino_GFX setting + ******************************************************************************/ +#include + +/* OPTION 1: Uncomment a dev device in Arduino_GFX_dev_device.h */ +#include "Arduino_GFX_dev_device.h" + +#ifndef GFX_DEV_DEVICE +/* OPTION 2: Manual define hardware */ + +/* Step 1: Define pins in Arduino_GFX_databus.h */ +#include "Arduino_GFX_pins.h" + +/* Step 2: Uncomment your databus in Arduino_GFX_databus.h */ +#include "Arduino_GFX_databus.h" + +/* Step 3: Uncomment your display driver in Arduino_GFX_display.h */ +#include "Arduino_GFX_display.h" + +#endif /* Manual define hardware */ +/******************************************************************************* + * End of Arduino_GFX setting + ******************************************************************************/ + +#ifdef ESP32 +#undef F +#define F(s) (s) +#endif + +int32_t w, h, n, n1, cx, cy, cx1, cy1, cn, cn1; +uint8_t tsa, tsb, tsc, ds; + +void setup() +{ + Serial.begin(115200); + // Serial.setDebugOutput(true); + // while(!Serial); + Serial.println("Arduino_GFX PDQgraphicstest example!"); + +#ifdef GFX_EXTRA_PRE_INIT + GFX_EXTRA_PRE_INIT(); +#endif + + // Init Display + if (!gfx->begin()) + // if (!gfx->begin(80000000)) /* specify data bus speed */ + { + Serial.println("gfx->begin() failed!"); + } + + w = gfx->width(); + h = gfx->height(); + n = min(w, h); + n1 = n - 1; + cx = w / 2; + cy = h / 2; + cx1 = cx - 1; + cy1 = cy - 1; + cn = min(cx1, cy1); + cn1 = cn - 1; + tsa = ((w <= 176) || (h <= 160)) ? 1 : (((w <= 240) || (h <= 240)) ? 2 : 3); // text size A + tsb = ((w <= 272) || (h <= 220)) ? 1 : 2; // text size B + tsc = ((w <= 220) || (h <= 220)) ? 1 : 2; // text size C + ds = (w <= 160) ? 9 : 12; // digit size + +#ifdef GFX_BL + pinMode(GFX_BL, OUTPUT); + digitalWrite(GFX_BL, HIGH); +#endif +} + +static inline uint32_t micros_start() __attribute__((always_inline)); +static inline uint32_t micros_start() +{ + uint8_t oms = millis(); + while ((uint8_t)millis() == oms) + ; + return micros(); +} + +void loop(void) +{ + + + Serial.println(F("Benchmark\tmicro-secs")); + + int32_t usecFillScreen = testFillScreen(); + serialOut(F("Screen fill\t"), usecFillScreen, 100, true); + + int32_t usecText = testText(); + serialOut(F("Text\t"), usecText, 3000, true); + + int32_t usecPixels = testPixels(); + serialOut(F("Pixels\t"), usecPixels, 100, true); + + int32_t usecLines = testLines(); + serialOut(F("Lines\t"), usecLines, 100, true); + + int32_t usecFastLines = testFastLines(); + serialOut(F("Horiz/Vert Lines\t"), usecFastLines, 100, true); + + int32_t usecFilledRects = testFilledRects(); + serialOut(F("Rectangles (filled)\t"), usecFilledRects, 100, false); + + int32_t usecRects = testRects(); + serialOut(F("Rectangles (outline)\t"), usecRects, 100, true); + + int32_t usecFilledTrangles = testFilledTriangles(); + serialOut(F("Triangles (filled)\t"), usecFilledTrangles, 100, false); + + int32_t usecTriangles = testTriangles(); + serialOut(F("Triangles (outline)\t"), usecTriangles, 100, true); + + int32_t usecFilledCircles = testFilledCircles(10); + serialOut(F("Circles (filled)\t"), usecFilledCircles, 100, false); + + int32_t usecCircles = testCircles(10); + serialOut(F("Circles (outline)\t"), usecCircles, 100, true); + + int32_t usecFilledArcs = testFillArcs(); + serialOut(F("Arcs (filled)\t"), usecFilledArcs, 100, false); + + int32_t usecArcs = testArcs(); + serialOut(F("Arcs (outline)\t"), usecArcs, 100, true); + + int32_t usecFilledRoundRects = testFilledRoundRects(); + serialOut(F("Rounded rects (filled)\t"), usecFilledRoundRects, 100, false); + + int32_t usecRoundRects = testRoundRects(); + serialOut(F("Rounded rects (outline)\t"), usecRoundRects, 100, true); + +#ifdef CANVAS + uint32_t start = micros_start(); + gfx->flush(); + int32_t usecFlush = micros() - start; + serialOut(F("flush (Canvas only)\t"), usecFlush, 0, false); +#endif + + Serial.println(F("Done!")); + //gfx->fillScreen(BLACK); + + uint16_t c = 4; + int8_t d = 1; + for (int32_t i = 0; i < h; i++) + { + gfx->drawFastHLine(0, i, w, c); + c += d; + if (c <= 4 || c >= 11) + { + d = -d; + } + } + + gfx->setCursor(0, 0); + + gfx->setTextSize(tsa); + gfx->setTextColor(MAGENTA); + gfx->println(F("Arduino GFX PDQ")); + + if (h > w) + { + gfx->setTextSize(tsb); + gfx->setTextColor(GREEN); + gfx->print(F("\nBenchmark ")); + gfx->setTextSize(tsc); + if (ds == 12) + { + gfx->print(F(" ")); + } + gfx->println(F("micro-secs")); + } + + printnice(F("Screen fill "), usecFillScreen); + printnice(F("Text "), usecText); + printnice(F("Pixels "), usecPixels); + printnice(F("Lines "), usecLines); + printnice(F("H/V Lines "), usecFastLines); + printnice(F("Rectangles F"), usecFilledRects); + printnice(F("Rectangles "), usecRects); + printnice(F("Triangles F "), usecFilledTrangles); + printnice(F("Triangles "), usecTriangles); + printnice(F("Circles F "), usecFilledCircles); + printnice(F("Circles "), usecCircles); + printnice(F("Arcs F "), usecFilledArcs); + printnice(F("Arcs "), usecArcs); + printnice(F("RoundRects F"), usecFilledRoundRects); + printnice(F("RoundRects "), usecRoundRects); + + if ((h > w) || (h > 240)) + { + gfx->setTextSize(tsc); + gfx->setTextColor(GREEN); + gfx->print(F("\nBenchmark Complete!")); + } + +#ifdef CANVAS + gfx->flush(); +#endif + + delay(60 * 1000L); +} + +#ifdef ESP32 +void serialOut(const char *item, int32_t v, uint32_t d, bool clear) +#else +void serialOut(const __FlashStringHelper *item, int32_t v, uint32_t d, bool clear) +#endif +{ +#ifdef CANVAS + gfx->flush(); +#endif + Serial.print(item); + if (v < 0) + { + Serial.println(F("N/A")); + } + else + { + Serial.println(v); + } + delay(d); + if (clear) + { + gfx->fillScreen(BLACK); + } +} + +#ifdef ESP32 +void printnice(const char *item, long int v) +#else +void printnice(const __FlashStringHelper *item, long int v) +#endif +{ + gfx->setTextSize(tsb); + gfx->setTextColor(CYAN); + gfx->print(item); + + gfx->setTextSize(tsc); + gfx->setTextColor(YELLOW); + if (v < 0) + { + gfx->println(F(" N / A")); + } + else + { + char str[32] = {0}; +#ifdef RTL8722DM + sprintf(str, "%d", (int)v); +#else + sprintf(str, "%ld", v); +#endif + for (char *p = (str + strlen(str)) - 3; p > str; p -= 3) + { + memmove(p + 1, p, strlen(p) + 1); + *p = ','; + } + while (strlen(str) < ds) + { + memmove(str + 1, str, strlen(str) + 1); + *str = ' '; + } + gfx->println(str); + } +} + +int32_t testFillScreen() +{ + uint32_t start = micros_start(); + // Shortened this tedious test! + gfx->fillScreen(WHITE); + gfx->fillScreen(RED); + gfx->fillScreen(GREEN); + gfx->fillScreen(BLUE); + gfx->fillScreen(BLACK); + + return micros() - start; +} + +int32_t testText() +{ + uint32_t start = micros_start(); + gfx->setCursor(0, 0); + + gfx->setTextSize(1); + gfx->setTextColor(WHITE, BLACK); + gfx->println(F("Hello World!")); + + gfx->setTextSize(2); + gfx->setTextColor(gfx->color565(0xff, 0x00, 0x00)); + gfx->print(F("RED ")); + gfx->setTextColor(gfx->color565(0x00, 0xff, 0x00)); + gfx->print(F("GREEN ")); + gfx->setTextColor(gfx->color565(0x00, 0x00, 0xff)); + gfx->println(F("BLUE")); + + gfx->setTextSize(tsa); + gfx->setTextColor(YELLOW); + gfx->println(1234.56); + + gfx->setTextColor(WHITE); + gfx->println((w > 128) ? 0xDEADBEEF : 0xDEADBEE, HEX); + + gfx->setTextColor(CYAN, WHITE); + gfx->println(F("Groop,")); + + gfx->setTextSize(tsc); + gfx->setTextColor(MAGENTA, WHITE); + gfx->println(F("I implore thee,")); + + gfx->setTextSize(1); + gfx->setTextColor(NAVY, WHITE); + gfx->println(F("my foonting turlingdromes.")); + + gfx->setTextColor(DARKGREEN, WHITE); + gfx->println(F("And hooptiously drangle me")); + + gfx->setTextColor(DARKCYAN, WHITE); + gfx->println(F("with crinkly bindlewurdles,")); + + gfx->setTextColor(MAROON, WHITE); + gfx->println(F("Or I will rend thee")); + + gfx->setTextColor(PURPLE, WHITE); + gfx->println(F("in the gobberwartsb")); + + gfx->setTextColor(OLIVE, WHITE); + gfx->println(F("with my blurglecruncheon,")); + + gfx->setTextColor(DARKGREY, WHITE); + gfx->println(F("see if I don't!")); + + gfx->setTextSize(2); + gfx->setTextColor(RED); + gfx->println(F("Size 2")); + + gfx->setTextSize(3); + gfx->setTextColor(ORANGE); + gfx->println(F("Size 3")); + + gfx->setTextSize(4); + gfx->setTextColor(YELLOW); + gfx->println(F("Size 4")); + + gfx->setTextSize(5); + gfx->setTextColor(GREENYELLOW); + gfx->println(F("Size 5")); + + gfx->setTextSize(6); + gfx->setTextColor(GREEN); + gfx->println(F("Size 6")); + + gfx->setTextSize(7); + gfx->setTextColor(BLUE); + gfx->println(F("Size 7")); + + gfx->setTextSize(8); + gfx->setTextColor(PURPLE); + gfx->println(F("Size 8")); + + gfx->setTextSize(9); + gfx->setTextColor(PALERED); + gfx->println(F("Size 9")); + + return micros() - start; +} + +int32_t testPixels() +{ + uint32_t start = micros_start(); + + for (int16_t y = 0; y < h; y++) + { + for (int16_t x = 0; x < w; x++) + { + gfx->drawPixel(x, y, gfx->color565(x << 3, y << 3, x * y)); + } +#ifdef ESP8266 + yield(); // avoid long run triggered ESP8266 WDT restart +#endif + } + + return micros() - start; +} + +int32_t testLines() +{ + uint32_t start; + int32_t x1, y1, x2, y2; + + start = micros_start(); + + x1 = y1 = 0; + y2 = h - 1; + for (x2 = 0; x2 < w; x2 += 6) + { + gfx->drawLine(x1, y1, x2, y2, BLUE); + } +#ifdef ESP8266 + yield(); // avoid long run triggered ESP8266 WDT restart +#endif + + x2 = w - 1; + for (y2 = 0; y2 < h; y2 += 6) + { + gfx->drawLine(x1, y1, x2, y2, BLUE); + } +#ifdef ESP8266 + yield(); // avoid long run triggered ESP8266 WDT restart +#endif + + x1 = w - 1; + y1 = 0; + y2 = h - 1; + for (x2 = 0; x2 < w; x2 += 6) + { + gfx->drawLine(x1, y1, x2, y2, BLUE); + } +#ifdef ESP8266 + yield(); // avoid long run triggered ESP8266 WDT restart +#endif + + x2 = 0; + for (y2 = 0; y2 < h; y2 += 6) + { + gfx->drawLine(x1, y1, x2, y2, BLUE); + } +#ifdef ESP8266 + yield(); // avoid long run triggered ESP8266 WDT restart +#endif + + x1 = 0; + y1 = h - 1; + y2 = 0; + for (x2 = 0; x2 < w; x2 += 6) + { + gfx->drawLine(x1, y1, x2, y2, BLUE); + } +#ifdef ESP8266 + yield(); // avoid long run triggered ESP8266 WDT restart +#endif + + x2 = w - 1; + for (y2 = 0; y2 < h; y2 += 6) + { + gfx->drawLine(x1, y1, x2, y2, BLUE); + } +#ifdef ESP8266 + yield(); // avoid long run triggered ESP8266 WDT restart +#endif + + x1 = w - 1; + y1 = h - 1; + y2 = 0; + for (x2 = 0; x2 < w; x2 += 6) + { + gfx->drawLine(x1, y1, x2, y2, BLUE); + } +#ifdef ESP8266 + yield(); // avoid long run triggered ESP8266 WDT restart +#endif + + x2 = 0; + for (y2 = 0; y2 < h; y2 += 6) + { + gfx->drawLine(x1, y1, x2, y2, BLUE); + } +#ifdef ESP8266 + yield(); // avoid long run triggered ESP8266 WDT restart +#endif + + return micros() - start; +} + +int32_t testFastLines() +{ + uint32_t start; + int32_t x, y; + + start = micros_start(); + + for (y = 0; y < h; y += 5) + { + gfx->drawFastHLine(0, y, w, RED); + } + for (x = 0; x < w; x += 5) + { + gfx->drawFastVLine(x, 0, h, BLUE); + } + + return micros() - start; +} + +int32_t testFilledRects() +{ + uint32_t start; + int32_t i, i2; + + start = micros_start(); + + for (i = n; i > 0; i -= 6) + { + i2 = i / 2; + + gfx->fillRect(cx - i2, cy - i2, i, i, gfx->color565(i, i, 0)); + } + + return micros() - start; +} + +int32_t testRects() +{ + uint32_t start; + int32_t i, i2; + + start = micros_start(); + for (i = 2; i < n; i += 6) + { + i2 = i / 2; + gfx->drawRect(cx - i2, cy - i2, i, i, GREEN); + } + + return micros() - start; +} + +int32_t testFilledCircles(uint8_t radius) +{ + uint32_t start; + int32_t x, y, r2 = radius * 2; + + start = micros_start(); + + for (x = radius; x < w; x += r2) + { + for (y = radius; y < h; y += r2) + { + gfx->fillCircle(x, y, radius, MAGENTA); + } + } + + return micros() - start; +} + +int32_t testCircles(uint8_t radius) +{ + uint32_t start; + int32_t x, y, r2 = radius * 2; + int32_t w1 = w + radius; + int32_t h1 = h + radius; + + // Screen is not cleared for this one -- this is + // intentional and does not affect the reported time. + start = micros_start(); + + for (x = 0; x < w1; x += r2) + { + for (y = 0; y < h1; y += r2) + { + gfx->drawCircle(x, y, radius, WHITE); + } + } + + return micros() - start; +} + +int32_t testFillArcs() +{ + int16_t i, r = 360 / cn; + uint32_t start = micros_start(); + + for (i = 6; i < cn; i += 6) + { + gfx->fillArc(cx1, cy1, i, i - 3, 0, i * r, RED); + } + + return micros() - start; +} + +int32_t testArcs() +{ + int16_t i, r = 360 / cn; + uint32_t start = micros_start(); + + for (i = 6; i < cn; i += 6) + { + gfx->drawArc(cx1, cy1, i, i - 3, 0, i * r, WHITE); + } + + return micros() - start; +} + +int32_t testFilledTriangles() +{ + uint32_t start; + int32_t i; + + start = micros_start(); + + for (i = cn1; i > 10; i -= 5) + { + gfx->fillTriangle(cx1, cy1 - i, cx1 - i, cy1 + i, cx1 + i, cy1 + i, + gfx->color565(0, i, i)); + } + + return micros() - start; +} + +int32_t testTriangles() +{ + uint32_t start; + int32_t i; + + start = micros_start(); + + for (i = 0; i < cn; i += 5) + { + gfx->drawTriangle( + cx1, cy1 - i, // peak + cx1 - i, cy1 + i, // bottom left + cx1 + i, cy1 + i, // bottom right + gfx->color565(0, 0, i)); + } + + return micros() - start; +} + +int32_t testFilledRoundRects() +{ + uint32_t start; + int32_t i, i2; + + start = micros_start(); + + for (i = n1; i > 20; i -= 6) + { + i2 = i / 2; + gfx->fillRoundRect(cx - i2, cy - i2, i, i, i / 8, gfx->color565(0, i, 0)); + } + + return micros() - start; +} + +int32_t testRoundRects() +{ + uint32_t start; + int32_t i, i2; + + start = micros_start(); + + for (i = 20; i < n1; i += 6) + { + i2 = i / 2; + gfx->drawRoundRect(cx - i2, cy - i2, i, i, i / 8, gfx->color565(i, 0, 0)); + } + + return micros() - start; +} + +/*************************************************** + Original sketch text: + + This is an example sketch for the Adafruit 2.2" SPI display. + This library works with the Adafruit 2.2" TFT Breakout w/SD card + ----> http://www.adafruit.com/products/1480 + + Check out the links above for our tutorials and wiring diagrams + These displays use SPI to communicate, 4 or 5 pins are required to + interface (RST is optional) + Adafruit invests time and resources providing this open source code, + please support Adafruit and open-source hardware by purchasing + products from Adafruit! + + Written by Limor Fried/Ladyada for Adafruit Industries. + MIT license, all text above must be included in any redistribution + ****************************************************/