diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml
deleted file mode 100644
index 1b146b2..0000000
--- a/.github/workflows/build.yml
+++ /dev/null
@@ -1,72 +0,0 @@
-name: Build and Package Firmware
-
-on:
-  push:
-    branches:
-      - '*'
-    tags:
-      - 'v*'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    container: espressif/idf:v5.2.1
-    steps:
-      - name: Checkout Repository
-        uses: actions/checkout@v4
-        with:
-          submodules: recursive
-
-      - name: Configure Safe Directory
-        run: git config --global --add safe.directory "*"
-
-      - name: Set Version Identifier
-        run: git rev-parse --short HEAD > version.txt && echo "Build version (commit ID): $(cat version.txt)"
-
-      - name: Build and Run Host Unit Tests
-        run: cmake -S tests -B tests/build && cmake --build tests/build && ./tests/build/test_decoder
-
-      - name: Build Firmware
-        run: . $IDF_PATH/export.sh && idf.py build
-
-      - name: Create Flashing Instructions Document
-        run: |
-          mkdir -p dist && cat << 'EOF' > dist/README_FLASHING.txt
-          ESP32 ALDL Bridge Firmware Flash Instructions
-          =============================================
-
-          Prerequisites:
-          - Python 3 installed
-          - esptool installed: pip install esptool
-
-          Connect your ESP32 to your PC, identify its serial port, and run the following command to flash:
-
-          esptool.py --chip esp32 -b 460800 --before default_reset --after hard_reset write_flash --flash_mode dio --flash_size 2MB --flash_freq 40m 0x1000 bootloader.bin 0x8000 partition-table.bin 0x10000 esp32-aldl.bin
-          EOF
-
-      - name: Stage Firmware Binaries
-        run: cp build/esp32-aldl.bin dist/ && cp build/bootloader/bootloader.bin dist/ && cp build/partition_table/partition-table.bin dist/
-
-      - name: Package Release
-        run: tar -czvf esp32-aldl-firmware.tar.gz -C dist .
-
-      # ---------------------------------------------------------------
-      # Conditional Artifact Uploads for Cross-Platform Compatibility
-      # ---------------------------------------------------------------
-
-      - name: Upload Firmware Package (GitHub)
-        if: ${{ github.server_url == 'https://github.com' }}
-        uses: actions/upload-artifact@v4
-        with:
-          name: esp32-aldl-firmware-${{ github.sha }}
-          path: esp32-aldl-firmware.tar.gz
-          if-no-files-found: error
-
-      - name: Upload Firmware Package (Gitea)
-        if: ${{ github.server_url != 'https://github.com' }}
-        uses: actions/upload-artifact@v3
-        with:
-          name: esp32-aldl-firmware-${{ github.sha }}
-          path: esp32-aldl-firmware.tar.gz
-          if-no-files-found: error
-          
\ No newline at end of file