ESP32 ALDL Dashboard Android Application
A modern, high-performance Android application designed to interface with GM OBD1 systems—specifically the 1986 Pontiac Fiero 1227170 ECM —using a custom ESP32 Bluetooth SPP bridge. The app decodes the low-speed 160-baud ALDL (Assembly Line Diagnostic Link) datastream in real-time, displaying live telemetry, logging diagnostic parameters, and generating tuning heatmaps.
📸 Screenshots
The app features a clean, dark-themed interface optimized for in-car use. Below are the primary screens:
1. Main Dashboard (Disconnected / Initial State)
2. Live Instrumentation Dashboard (Connected)
Real-time gauges, sensor cards, status flags, and active ECM fault code alerts.
3. Real-Time Telemetry Charts (Multi-Parameter Mode)
Dynamic line charts supporting up to 4 simultaneous parameters with single/multi toggle.
4. BLM/INT Fuel Trim Heatmap Table
Color-coded 14×17 (RPM × MAP) diagnostic grid with live updates and legend.
5. Settings & Alerts
Persistent preferences, auto-logging controls, raw datastream recording, logged files browser, and threshold sliders.
🌟 Key Features
- Real-Time Instrumentation Dashboard: Vibrant, animated Canvas-based components including a radial RPM gauge and a Throttle Position Sensor (TPS) bar graph.
- Instantaneous readouts for Engine Speed (RPM), Vehicle Speed (MPH), Coolant Temperature, Manifold Air Temp (MAT), Manifold Absolute Pressure (MAP), TPS voltage, O2 Sensor voltage, and Battery voltage.
- Status Flags: Instant visibility into critical operating states like Closed Loop Mode, Rich/Lean Mixture, Torque Converter Clutch (TCC) Lockup, and A/C Clutch requests.
- Derived Metrics: Real-time calculated estimates of Engine Load and Fuel Flow Hints.
- BLM & INT Fuel Trim Heatmap Grid (New): A real-time diagnostic table indexing fuel trim metrics across 14 RPM bands (600 to 4800 RPM) and 17 MAP bands (20 to 100 kPa).
- Color-coded cell visualisations using dynamic RGB interpolation: Green for lean fuel trims (≤ 120), Blue for stoichiometric neutral (128), and Red for rich fuel trims (≥ 150).
- Multi-Parameter Line Charting (New): A dynamic telemetry visualizer toggling between a Single Chart Mode (large-scale view of any metric) and a Multi Chart Mode displaying up to 4 selected metrics in a 2x2 grid.
- Supports charting for 12 distinct parameters: RPM, Coolant Temp, MAP, TPS, O2 Sensor, Battery Voltage, Spark Advance, Base Pulse Width (BPW), MAT, BLM, Integrator, and Idle Air Control (IAC) Position.
- Trouble Code Diagnostic Engine: Decodes active ECM trouble codes into human-readable alerts (e.g., Code 14 - Coolant Temperature Sensor High) dynamically displayed at the bottom of the dashboard screen.
- Dual-Logging Framework:
- Room Database Sessions: Saves all active telemetry packets to a local SQLite database using Jetpack Room.
- TunerPro RT CSV Export: Automatically compiles sessions into .csv log files fully compatible with TunerPro RT, exported to Downloads/ALDLLogs using Android MediaStore.
- Raw Binary Stream Logging (New): Optional raw capture recording direct 27-byte diagnostic datastream packets (incorporating AA 55 headers and 25-byte payloads) to .bin files for advanced playback and diagnostic troubleshooting.
- Logged Files Manager (New): An in-app browser inside the Settings panel that scans Downloads/ALDLLogs for CSV and BIN logs, enabling users to view details, open logs with default viewers, or share files via the Android Sharesheet.
- Persistent Preferences & Guardrails: DataStore-backed settings for Temperature Unit toggle (°C/°F), Auto-Logging toggles, Coolant alert thresholds, Low Battery alert thresholds, and Raw Binary Stream recording toggles.
🛠️ Architecture & Technical Highlights
- Jetpack Compose & MVVM: Developed with a clean Model-View-ViewModel architecture. State emission is managed via reactive StateFlow and SharedFlow streams to guarantee lag-free rendering.
- Circular Buffering & Packet Validation (New): Ingests raw Bluetooth stream buffers using an ArrayDeque circular buffer.
- Employs a 27-byte lookahead validation algorithm to search for authentic AA 55 frame headers, preventing sync misalignment or telemetry corruption from noisy serial lines.
- TunerPro ADS Translation: Uses an advanced ALDLParser mapping raw 25-byte payloads into physical metrics using exact scale conversions, offsets, and non-linear lookup interpolations (derived from the 24-INT10.ads definition file).
- Foreground Service Operations (New): Runs a persistent BluetoothForegroundService to keep the Bluetooth socket open and stream telemetry continuously in the background, even when the phone screen is locked or the app is minimized.
📱 Requirements
- Android Device: Android 8.0 (API Level 26) or higher.
- Requires Nearby Devices (Android 12+) and Legacy Bluetooth Admin access.
- ESP32 Transceiver: Bridge hardware programmed to output 160-baud serial data from the ALDL pin and stream it over Classic Bluetooth SPP (named
ESP32-ALDL).
🚀 Setup & Usage
- Pair the ESP32-ALDL Bluetooth module in your Android system settings.
- Launch the application and grant all requested permissions.
- Tap Connect BT on the main dashboard to establish connection and start telemetry.
- Navigate between screens (Dashboard, Charts, BLM Table, Settings) using the bottom navigation bar.
- Configure logging preferences or browse logged CSV/BIN files in the Settings menu.
🧪 Testing & Verification
The parsing logic, scaling calculations, and boundary conditions are validated by a unit test suite located in ALDLParserTest.kt.
To run the unit tests, execute the following Gradle command in the root project directory:
./gradlew test
Coverage Areas
- Sample Frame Decoding: Parses a real-world telemetry payload and verifies the output of IAC position, coolant/manifold temperatures, MAP, TPS, battery voltage, BLM, integrator, spark advance, base pulse width, closed-loop flags, and active trouble codes.
- Boundary Guards: Ensures outlier protection for engine speeds, battery voltages, TPS, and coolant temperatures, rejecting out-of-range sensor values as invalid data packets.
- Lookahead Stability: Validates parser behavior against truncated or incomplete frame fragments.
📄 License & Privacy
- LICENSE (MIT)
- PRIVACY.md