From 41e4e9126e44577e255c62fcbd907e570a7fc4ed Mon Sep 17 00:00:00 2001 From: gronod Date: Fri, 28 Jun 2024 17:24:47 +0100 Subject: [PATCH] Update README.MD --- README.MD | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/README.MD b/README.MD index af29513..6d58f76 100644 --- a/README.MD +++ b/README.MD @@ -58,19 +58,19 @@ Configure the project settings, including Wi-Fi credentials if necessary. Upload the code to the ESP32 microcontroller. ### Usage -1. ## Setup: +1. #### Setup: - Ensure the development tank is clean and dry. - Prepare the water bath and set the desired temperature using a sous vide heater or another closed-loop temperature control device. - Submerge the development tank in the water bath. -2. ## Initialization: +2. #### Initialization: - Power on the device and wait for the initial setup to complete. -3. ## Sequence Selection: +3. #### Sequence Selection: - Select the desired development sequence from the options provided. -4. ## Processing Steps: +4. #### Processing Steps: - For each processing step, follow these instructions: 1. **Add Chemistry:** Fill the tank with the required volume of the developing chemical. @@ -79,8 +79,7 @@ Upload the code to the ESP32 microcontroller. 4. **Drain Chemistry:** At the end of the step, drain the developing chemical from the tank. 5. **Rinse and Repeat:** Repeat the process for each subsequent step, adding and draining the appropriate chemicals as needed. -5. ## Completion: - +5. #### Completion: - Follow standard procedures to dry the film.