From a089d3e97eb4be80e3d1fc581ca05b23a9a1d0e7 Mon Sep 17 00:00:00 2001 From: Vitor de Miranda Henrique Date: Thu, 1 Mar 2018 08:50:16 -0600 Subject: [PATCH] Update README.md --- README.md | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/README.md b/README.md index 6a5128d..82ae990 100644 --- a/README.md +++ b/README.md @@ -168,19 +168,19 @@ You can enable GCODE commands to control configured **outputs**. The list of supported gcodes: -Regular outputs +* Regular outputs 
ENC O[id] S[value]
Id is generated on the setting plugin, value can be 0 to turn OFF the output or 1 to turn ON output. Ex: sending ENC O2 S1 would turn ON output 2. -PWM outputs +* PWM outputs 
ENC O[id] S[pwm value]
Id is generated on the setting plugin, value is the duty cycle from 0 to 100. Ex: sending ENC O5 S75 would turn set duty cycle of 75% on output 5. -Neopixel +* Neopixel 
ENC O[id] R[red value] G[green value] B[blue value]
Id is generated on the setting plugin, value should be between 0 to 255. R, G, and B are the colors for that value. Ex: sending ENC O1 R255 G0 B0 would set neopixel with id 1 color to full red. -Temperature / Humidity Control +* Temperature / Humidity Control 
ENC O[id] W[wait value] S[set value]
Id is generated on the setting plugin, W specify if the plugin should wait or not for the enclosure to reach the temperature (1 is to wait), S will set the set temperature. Ex: ENC O1 W1 S45 will set temperature control with id 1 to 45 and wait until the temperature is reached to continue printing.