diff --git a/.gitignore b/.gitignore
index 564ea90..3f311b8 100644
--- a/.gitignore
+++ b/.gitignore
@@ -1,3 +1,4 @@
 .vscode
 *.pyc
-*.egg-info*
+*.egg-info
+.DS_Store
diff --git a/octoprint_enclosure/old_stuff/SI7021.py b/octoprint_enclosure/old_stuff/SI7021.py
index 6b352f1..3e1eb60 100644
--- a/octoprint_enclosure/old_stuff/SI7021.py
+++ b/octoprint_enclosure/old_stuff/SI7021.py
@@ -3,14 +3,18 @@ import time
 import sys
 
 
-if len(sys.argv) == 2:
+if len(sys.argv) == 2 or len(sys.argv) == 3:
     address = int(sys.argv[1],16)
+    if len(sys.argv) == 3:
+        busNum = int(sys.argv[2],16)
+    else:
+        busNum = 1
 else:
     print('-1 | -1')
     sys.exit(1)
 
 # Get I2C bus
-bus = smbus.SMBus(1)
+bus = smbus.SMBus(busNum)
 
 # SI7021 address, 0x40(64)
 #		0xF5(245)	Select Relative Humidity NO HOLD master mode
diff --git a/octoprint_enclosure/old_stuff/__init__.py b/octoprint_enclosure/old_stuff/__init__.py
index d66a07b..473321c 100644
--- a/octoprint_enclosure/old_stuff/__init__.py
+++ b/octoprint_enclosure/old_stuff/__init__.py
@@ -23,6 +23,35 @@ import json
 import copy
 
 
+#Function that returns Boolean output state of the GPIO inputs / outputs
+def PinState_Boolean(pin, ActiveLow) :
+    try:
+        state = GPIO.input(pin)
+        if ActiveLow and not state: return True
+        if not ActiveLow and state: return True 
+        return False
+    except:
+        return "ERROR: Unable to read pin"
+
+#Function that returns human-readable output state of the GPIO inputs / outputs
+def PinState_Human(pin, ActiveLow):
+    PinState = PinState_Boolean(pin, ActiveLow)
+    if PinState == True :
+        return " ON "
+    elif PinState == False:		
+        return " OFF "
+    else:
+        return PinState
+
+#Translates the Pull-Up/Pull-Down GPIO resistor setting to ActiveLow/ActiveHigh boolean
+def CheckInputActiveLow(Input_Pull_Resistor):
+    #input_pull_up
+    #input_pull_down
+    if Input_Pull_Resistor == "input_pull_up":
+        return True
+    else:
+        return False
+        
 class EnclosurePlugin(octoprint.plugin.StartupPlugin, octoprint.plugin.TemplatePlugin, octoprint.plugin.SettingsPlugin,
                       octoprint.plugin.AssetPlugin, octoprint.plugin.BlueprintPlugin,
                       octoprint.plugin.EventHandlerPlugin):
@@ -52,10 +81,8 @@ class EnclosurePlugin(octoprint.plugin.StartupPlugin, octoprint.plugin.TemplateP
     @staticmethod
     def to_float(value):
         """Converts value to flow
-
         Arguments:
             value {any} -- value to be
-
         Returns:
             float -- value converted
         """
@@ -100,7 +127,7 @@ class EnclosurePlugin(octoprint.plugin.StartupPlugin, octoprint.plugin.TemplateP
         for command in command_string.split(' '):
             index = command.upper().find(gcode.upper())
             if not index == -1:
-                return command.replace(gcode, '').upper()
+                return command.replace(gcode, '')
         return -1
 
     # ~~ StartupPlugin mixin
@@ -144,6 +171,40 @@ class EnclosurePlugin(octoprint.plugin.StartupPlugin, octoprint.plugin.TemplateP
             self._settings.set(["rpi_inputs"], [])
             self.rpi_inputs = self._settings.get(["rpi_inputs"])
 
+    #Scan all configured inputs and outputs and return the pin value
+    @octoprint.plugin.BlueprintPlugin.route("/ReadPin/<int:identifier>", methods=["GET"])
+    def ReadSinglePin(self, identifier):
+        Resp = []
+        MatchFound = False
+        for rpi_input in self.rpi_inputs:
+            if identifier == self.to_int(rpi_input['gpio_pin']):
+                MatchFound = True
+                ConfiguredAs = "Input"
+                ActiveLow = CheckInputActiveLow(rpi_input['input_pull_resistor'])
+                pin = self.to_int(rpi_input['gpio_pin'])
+                val = PinState_Human(pin,ActiveLow)
+                label = rpi_input['label']
+                Resp.append(dict(Configured_As=ConfiguredAs, label=label, GPIO_Pin=pin, Active_Low=ActiveLow, State=val))
+        for rpi_output in self.rpi_outputs:
+            if identifier == self.to_int(rpi_output['gpio_pin']):
+                MatchFound = True
+                ConfiguredAs = "Output"
+                ActiveLow = CheckInputActiveLow(rpi_output['active_low'])
+                pin = self.to_int(rpi_output['gpio_pin'])
+                val = PinState_Human(pin,ActiveLow)
+                label = rpi_output['label']
+                Resp.append(dict(Configured_As=ConfiguredAs, label=label, GPIO_Pin=pin, Active_Low=ActiveLow, State=val))
+        if MatchFound == False:
+            pin = int(identifier)
+            ConfiguredAs = "Unknown"
+            ActiveLow = "Unknown"
+            try:
+                val = GPIO.input(pin)
+            except:
+                val = "GPIO pin not initialized."
+            Resp.append(dict(Configured_As=ConfiguredAs, GPIO_Pin=pin, Active_Low=ActiveLow, State=val))
+        return Response(json.dumps(Resp), mimetype='application/json')
+
     # ~~ Blueprintplugin mixin
     @octoprint.plugin.BlueprintPlugin.route("/inputs", methods=["GET"])
     def get_inputs(self):
@@ -151,10 +212,12 @@ class EnclosurePlugin(octoprint.plugin.StartupPlugin, octoprint.plugin.TemplateP
         for rpi_input in self.rpi_inputs:
             index = self.to_int(rpi_input['index_id'])
             label = rpi_input['label']
-            inputs.append(dict(index_id=index, label=label))
+            ActiveLow = CheckInputActiveLow(rpi_input['input_pull_resistor'])
+            pin = self.to_int(rpi_input['gpio_pin'])
+            val = PinState_Human(pin,ActiveLow)
+            inputs.append(dict(index_id=index, label=label, GPIO_Pin=pin, State=val))
         return Response(json.dumps(inputs), mimetype='application/json')
 
-
     @octoprint.plugin.BlueprintPlugin.route("/inputs/<int:identifier>", methods=["GET"])
     def get_input_status(self, identifier):
         for rpi_input in self.rpi_inputs:
@@ -207,7 +270,6 @@ class EnclosurePlugin(octoprint.plugin.StartupPlugin, octoprint.plugin.TemplateP
         self._settings.set(["rpi_inputs"], self.rpi_inputs)
         return make_response('', 204)
 
-
     @octoprint.plugin.BlueprintPlugin.route("/outputs", methods=["GET"])
     def get_outputs(self):
         outputs = []
@@ -215,7 +277,10 @@ class EnclosurePlugin(octoprint.plugin.StartupPlugin, octoprint.plugin.TemplateP
             if rpi_output['output_type'] == 'regular':
                 index = self.to_int(rpi_output['index_id'])
                 label = rpi_output['label']
-                outputs.append(dict(index_id=index, label=label))
+                pin = self.to_int(rpi_output['gpio_pin'])          
+                ActiveLow = rpi_output['active_low']
+                val = PinState_Human(pin,ActiveLow)
+                outputs.append(dict(index_id=index, label=label, GPIO_Pin=pin, State=val))
         return Response(json.dumps(outputs), mimetype='application/json')
 
 
@@ -225,7 +290,7 @@ class EnclosurePlugin(octoprint.plugin.StartupPlugin, octoprint.plugin.TemplateP
             if identifier == self.to_int(rpi_output['index_id']):
                 out = copy.deepcopy(rpi_output)
                 pin = self.to_int(rpi_output['gpio_pin'])
-                out['current_value'] = GPIO.input(pin) if not rpi_output['active_low'] else (not GPIO.input(pin))
+                out['current_value'] = PinState_Boolean(pin, rpi_output['active_low'] )
                 return Response(json.dumps(out), mimetype='application/json')
         return make_response('', 404)
 
@@ -454,9 +519,11 @@ class EnclosurePlugin(octoprint.plugin.StartupPlugin, octoprint.plugin.TemplateP
         for rpi_output in self.rpi_outputs:
             if rpi_output['output_type'] == 'regular':
                 pin = self.to_int(rpi_output['gpio_pin'])
-                val = GPIO.input(pin) if not rpi_output['active_low'] else (not GPIO.input(pin))
+                ActiveLow = rpi_output['active_low']
+                val = PinState_Boolean(pin, ActiveLow)
+                val2 = PinState_Human(pin, ActiveLow)
                 index = self.to_int(rpi_output['index_id'])
-                gpio_status.append(dict(index_id=index, status=val))
+                gpio_status.append(dict(index_id=index, status=val, State=val2))
         return Response(json.dumps(gpio_status), mimetype='application/json')
 
     @octoprint.plugin.BlueprintPlugin.route("/setIO", methods=["GET"])
@@ -581,7 +648,6 @@ class EnclosurePlugin(octoprint.plugin.StartupPlugin, octoprint.plugin.TemplateP
     def send_neopixel_command(self, led_pin, led_count, led_brightness, red, green, blue, address, neopixel_dirrect,
                               index_id, queue_id=None):
         """Send neopixel command
-
         Arguments:
             led_pin {int} -- GPIO number
             ledCount {int} -- number of LEDS
@@ -800,7 +866,7 @@ class EnclosurePlugin(octoprint.plugin.StartupPlugin, octoprint.plugin.TemplateP
                 elif sensor['temp_sensor_type'] == "am2320":
                     temp, hum = self.read_am2320_temp() # sensor has fixed address
                 elif sensor['temp_sensor_type'] == "si7021":
-                    temp, hum = self.read_si7021_temp(sensor['temp_sensor_address'])
+                    temp, hum = self.read_si7021_temp(sensor['temp_sensor_address'], sensor['temp_sensor_i2cbus'])
                 elif sensor['temp_sensor_type'] == "tmp102":
                     temp = self.read_tmp102_temp(sensor['temp_sensor_address'])
                     hum = 0
@@ -835,7 +901,7 @@ class EnclosurePlugin(octoprint.plugin.StartupPlugin, octoprint.plugin.TemplateP
                 for rpi_controlled_output in self.rpi_outputs:
                     if self.to_int(temperature_alarm['controlled_io']) == self.to_int(
                             rpi_controlled_output['index_id']):
-                        val = GPIO.LOW if rpi_controlled_output['active_low'] else GPIO.HIGH
+                        val = GPIO.LOW if temperature_alarm['controlled_io_set_value'] == 'low' else GPIO.HIGH
                         self.write_gpio(self.to_int(rpi_controlled_output['gpio_pin']), val)
                         for notification in self.notifications:
                             if notification['temperatureAction']:
@@ -864,7 +930,7 @@ class EnclosurePlugin(octoprint.plugin.StartupPlugin, octoprint.plugin.TemplateP
             stdout, _ = proc.communicate()
             if self._settings.get(["debug_temperature_log"]) is True:
                 self._logger.debug("MCP9808 result: %s", stdout)
-            return self.to_float(stdout.strip())
+            return self.to_float(stdout.decode("utf-8").strip())
         except Exception as ex:
             self._logger.info("Failed to execute python scripts, try disabling use SUDO on advanced section.")
             self.log_error(ex)
@@ -883,7 +949,7 @@ class EnclosurePlugin(octoprint.plugin.StartupPlugin, octoprint.plugin.TemplateP
             stdout = (Popen(cmd, shell=True, stdout=PIPE).stdout).read()
             if  self._settings.get(["debug_temperature_log"]) is True:
                 self._logger.debug("Dht result: %s", stdout)
-            temp, hum = stdout.split("|")
+            temp, hum = stdout.decode("utf-8").split("|")
             return (self.to_float(temp.strip()), self.to_float(hum.strip()))
         except Exception as ex:
             self._logger.info(
@@ -904,7 +970,7 @@ class EnclosurePlugin(octoprint.plugin.StartupPlugin, octoprint.plugin.TemplateP
             stdout = (Popen(cmd, shell=True, stdout=PIPE).stdout).read()
             if  self._settings.get(["debug_temperature_log"]) is True:
                 self._logger.debug("BME280 result: %s", stdout)
-            temp, hum = stdout.split("|")
+            temp, hum = stdout.decode("utf-8").split("|")
             return (self.to_float(temp.strip()), self.to_float(hum.strip()))
         except Exception as ex:
             self._logger.info(
@@ -925,7 +991,7 @@ class EnclosurePlugin(octoprint.plugin.StartupPlugin, octoprint.plugin.TemplateP
             stdout = (Popen(cmd, shell=True, stdout=PIPE).stdout).read()
             if  self._settings.get(["debug_temperature_log"]) is True:
                 self._logger.debug("AM2320 result: %s", stdout)
-            temp, hum = stdout.split("|")
+            temp, hum = stdout.decode("utf-8").split("|")
             return (self.to_float(temp.strip()), self.to_float(hum.strip()))
         except Exception as ex:
             self._logger.info(
@@ -933,20 +999,20 @@ class EnclosurePlugin(octoprint.plugin.StartupPlugin, octoprint.plugin.TemplateP
             self.log_error(ex)
             return (0, 0)
 
-    def read_si7021_temp(self, address):
+    def read_si7021_temp(self, address, i2cbus):
         try:
             script = os.path.dirname(os.path.realpath(__file__)) + "/SI7021.py "
             if self._settings.get(["use_sudo"]):
                 sudo_str = "sudo "
             else:
                 sudo_str = ""
-            cmd = sudo_str + "python " + script + str(address)
+            cmd = sudo_str + "python " + script + str(address) + " " + str(i2cbus)
             if  self._settings.get(["debug_temperature_log"]) is True:
                 self._logger.debug("Temperature SI7021 cmd: %s", cmd)
             stdout = (Popen(cmd, shell=True, stdout=PIPE).stdout).read()
             if  self._settings.get(["debug_temperature_log"]) is True:
                 self._logger.debug("SI7021 result: %s", stdout)
-            temp, hum = stdout.split("|")
+            temp, hum = stdout.decode("utf-8").split("|")
             return (self.to_float(temp.strip()), self.to_float(hum.strip()))
         except Exception as ex:
             self._logger.info(
@@ -990,7 +1056,7 @@ class EnclosurePlugin(octoprint.plugin.StartupPlugin, octoprint.plugin.TemplateP
             stdout, _ = proc.communicate()
             if  self._settings.get(["debug_temperature_log"]) is True:
                 self._logger.debug("TMP102 result: %s", stdout)
-            return self.to_float(stdout.strip())
+            return self.to_float(stdout.decode("utf-8").strip())
         except Exception as ex:
             self._logger.info("Failed to execute python scripts, try disabling use SUDO on advanced section.")
             self.log_error(ex)
@@ -1006,7 +1072,7 @@ class EnclosurePlugin(octoprint.plugin.StartupPlugin, octoprint.plugin.TemplateP
             stdout, _ = proc.communicate()
             if  self._settings.get(["debug_temperature_log"]) is True:
                 self._logger.debug("MAX31855 result: %s", stdout)
-            return self.to_float(stdout.strip())
+            return self.to_float(stdout.decode("utf-8").strip())
         except Exception as ex:
             self._logger.info("Failed to execute python scripts, try disabling use SUDO on advanced section.")
             self.log_error(ex)
@@ -1261,8 +1327,8 @@ class EnclosurePlugin(octoprint.plugin.StartupPlugin, octoprint.plugin.TemplateP
                                 item['time'] = time_now
                         for line in self._settings.get(["filament_sensor_gcode"]).split('\n'):
                             if line:
-                                self._printer.commands(line.strip().upper())
-                                self._logger.info("Sending GCODE command: %s", line.strip().upper())
+                                self._printer.commands(line.strip())
+                                self._logger.info("Sending GCODE command: %s", line.strip())
                                 time.sleep(0.2)
                         for notification in self.notifications:
                             if notification['filamentChange']:
@@ -1378,8 +1444,8 @@ class EnclosurePlugin(octoprint.plugin.StartupPlugin, octoprint.plugin.TemplateP
     def send_gcode_command(self, command):
         for line in command.split('\n'):
             if line:
-                self._printer.commands(line.strip().upper())
-                self._logger.info("Sending GCODE command: %s", line.strip().upper())
+                self._printer.commands(line.strip())
+                self._logger.info("Sending GCODE command: %s", line.strip())
                 time.sleep(0.2)
 
     def handle_printer_action(self, channel):
@@ -1880,7 +1946,7 @@ class EnclosurePlugin(octoprint.plugin.StartupPlugin, octoprint.plugin.TemplateP
 
 
 __plugin_name__ = "Enclosure Plugin"
-__plugin_pythoncompat__ = ">=3,<4"
+__plugin_pythoncompat__ = ">=2.7,<4"
 
 
 def __plugin_load__():
@@ -1891,4 +1957,4 @@ def __plugin_load__():
     __plugin_hooks__ = {
         "octoprint.comm.protocol.gcode.queuing"       : __plugin_implementation__.hook_gcode_queuing,
         "octoprint.plugin.softwareupdate.check_config": __plugin_implementation__.get_update_information
-    }
\ No newline at end of file
+    }
diff --git a/octoprint_enclosure/old_stuff/neopixel_direct.py b/octoprint_enclosure/old_stuff/neopixel_direct.py
index 3af63f9..6259377 100644
--- a/octoprint_enclosure/old_stuff/neopixel_direct.py
+++ b/octoprint_enclosure/old_stuff/neopixel_direct.py
@@ -17,7 +17,7 @@ else:
     print("fail")
     sys.exit(1)
 
-strip = Adafruit_NeoPixel(LED_COUNT, LED_PIN, LED_FREQ_HZ, LED_DMA, LED_INVERT)
+strip = Adafruit_NeoPixel(LED_COUNT, LED_PIN, LED_FREQ_HZ, LED_DMA, LED_INVERT, LED_BRIGHTNESS)
 strip.begin()
 
 color = Color(red, green, blue)
diff --git a/octoprint_enclosure/old_stuff/static/css/bootstrap-colorpicker.css b/octoprint_enclosure/old_stuff/static/css/bootstrap-colorpicker.css
index 0dfa89c..26cb0de 100644
--- a/octoprint_enclosure/old_stuff/static/css/bootstrap-colorpicker.css
+++ b/octoprint_enclosure/old_stuff/static/css/bootstrap-colorpicker.css
@@ -226,4 +226,5 @@
 }
 .colorpicker-inline.colorpicker-visible {
   display: inline-block;
-}
\ No newline at end of file
+}
+/*# sourceMappingURL=bootstrap-colorpicker.css.map */
\ No newline at end of file
diff --git a/octoprint_enclosure/old_stuff/static/js/enclosure.js b/octoprint_enclosure/old_stuff/static/js/enclosure.js
index b7a96e5..e9c4847 100644
--- a/octoprint_enclosure/old_stuff/static/js/enclosure.js
+++ b/octoprint_enclosure/old_stuff/static/js/enclosure.js
@@ -455,7 +455,8 @@ $(function () {
         printer_action: ko.observable("filament"),
         temp_sensor_navbar: ko.observable(true),
         filament_sensor_timeout: ko.observable(120),
-        filament_sensor_enabled: ko.observable(true)
+        filament_sensor_enabled: ko.observable(true),
+        temp_sensor_i2cbus: ko.observable(1)
       });
     };
 
@@ -706,4 +707,4 @@ $(function () {
     elements: ["#tab_plugin_enclosure", "#settings_plugin_enclosure", "#navbar_plugin_enclosure_1", "#navbar_plugin_enclosure_2"]
   });
 
-});
\ No newline at end of file
+});
diff --git a/octoprint_enclosure/old_stuff/templates/enclosure_settings.jinja2 b/octoprint_enclosure/old_stuff/templates/enclosure_settings.jinja2
index 5195bbe..a30ca69 100644
--- a/octoprint_enclosure/old_stuff/templates/enclosure_settings.jinja2
+++ b/octoprint_enclosure/old_stuff/templates/enclosure_settings.jinja2
@@ -11,7 +11,7 @@
     <!-- <div class="controls">
     <h5>IO <span data-bind="text: $index"> </span></h5>
   </div> -->
-    <!-- <div class="control-group">
+    <div class="control-group">
       <label class="control-label">{{ _('Output Type') }}</label>
       <div class="controls">
         <label class="radio">
@@ -55,7 +55,7 @@
       </div>
       <div class="controls">
         <label class="radio">
-          <input type="radio" value="gcode_output" data-bind="checked: output_type, attr: {name: 'output_type_' + $index() }"> {{ _('GCode') }}
+          <input type="radio" value="gcode_output" data-bind="checked: output_type, attr: {name: 'output_type_' + $index() }"> {{ _('Gcode') }}
           </span>
         </label>
       </div>
@@ -65,31 +65,31 @@
           </span>
         </label>
       </div>
-    </div> -->
+    </div>
     <!-- ko if: ($data.output_type() != "temperature_alarm")  -->
-    <!-- <div class="control-group">
+    <div class="control-group">
       <label class="control-label">{{ _('Label') }}</label>
       <div class="controls">
         <input type="text" class="input-block-level" data-bind="value: label">
         <span class="help-inline">Name displayed on Enclosure Tab</span>
       </div>
-    </div> -->
+    </div>
     <!-- /ko -->
-    <!-- <div class="control-group">
+    <div class="control-group">
       <label class="control-label">{{ _('Id') }}</label>
       <div class="controls">
         <input type="text" class="input-block-level" data-bind="value: index_id" disabled="true">
         <span class="help-inline">Id used for API control</span>
       </div>
-    </div> -->
+    </div>
     <!-- ko if: ($data.output_type() == "shell_output")  -->
-    <!-- <div class="control-group">
+    <div class="control-group">
       <label class="control-label">{{ _('Script') }}</label>
       <div class="controls">
         <input type="text" class="input-block-level" data-bind="value: shell_script">
         <span class="help-inline">Shell script to be executed</span>
       </div>
-    </div> -->
+    </div>
     <!-- /ko -->
     <!-- ko ifnot: ($data.output_type() == "gcode_output" || $data.output_type() == "temperature_alarm" || $data.output_type() == "shell_output" || $data.output_type() == "ledstrip") -->
     <div class="control-group">
@@ -98,8 +98,8 @@
         <input type="text" class="input-block-level" data-bind="value: gpio_pin">
         <!-- ko ifnot: ($data.output_type() == "neopixel_indirect")  -->
         <span class="help-inline">GPIO number that will be controlled.</span>
-        /ko
-        ko if: ($data.output_type() == "neopixel_indirect") 
+        <!-- /ko -->
+        <!-- ko if: ($data.output_type() == "neopixel_indirect")  -->
         <span class="help-inline">
           <span class="label label-danger">Attention</span> Neopixel requires a microcontroller (ex: arduino) 
             connected to I2C bus. This is the pin on the
@@ -328,22 +328,22 @@
     </div>
 
     <!-- ko if: ($data.auto_startup() || $data.startup_with_server())-->
-    <!-- <div class="control-group">
+    <div class="control-group">
       <label class="control-label">{{ _('Default Value') }}</label>
       <div class="controls">
         <input type="text" class="input-block-level" data-bind="value: temp_ctr_default_value">
         <span class="help-inline">Default temperature / humidity that temperature control will be set when the print starts or the server starts.</span>
       </div>
-    </div> -->
+    </div>
     <!-- /ko -->
 
-    <!-- <div class="control-group">
+    <div class="control-group">
       <label class="control-label">{{ _('Value Deadband') }}</label>
       <div class="controls">
         <input type="text" class="input-block-level" data-bind="value: temp_ctr_deadband">
         <span class="help-inline">Allowable drift on temperature / humidity control. Set it to zero to disable.</span>
       </div>
-    </div> -->
+    </div>
 
     <!-- ko if: ($data.temp_ctr_type() == "heater")  -->
     <div class="control-group">
@@ -387,7 +387,7 @@
     </div>
     <!-- /ko -->
     <!-- ko if: ($data.output_type() == "pwm")  -->
-    <!-- <div class="control-group">
+    <div class="control-group">
       <label class="control-label">{{ _('PWM Frequency') }}</label>
       <div class="controls">
         <input type="text" class="input-block-level" data-bind="value: pwm_frequency">
@@ -400,7 +400,7 @@
         <input type="text" class="input-block-level" data-bind="value: default_duty_cycle">
         <span class="help-inline">Value is in percentage, between 0 and 100</span>
       </div>
-    </div> -->
+    </div>
     <!-- /ko -->
     <!-- ko if: ($data.output_type() == "neopixel_indirect")  -->
     <div class="control-group">
@@ -413,7 +413,7 @@
     </div>
     <!-- /ko -->
     <!-- ko if: ($data.output_type() == "ledstrip")  -->
-    <!-- <div class="control-group">
+    <div class="control-group">
       <label class="control-label">{{ _('CLK') }}</label>
       <div class="controls">
         <input type="text" class="input-block-level" data-bind="value: ledstrip_gpio_clk">
@@ -431,10 +431,10 @@
         <input type="text" class="input-block-level" data-bind="value: default_ledstrip_color, attr: {name: 'colorpicker' } , click: $root.showColorPicker()">
         <span class="help-inline">Value needs to follow the format rgb(value_red,value_green,value_blue) where values should be between 0 and 255</span>
       </div>
-    </div> -->
+    </div>
     <!-- /ko -->
     <!-- ko if: ($data.output_type() == "neopixel_indirect" || $data.output_type() == "neopixel_direct")  -->
-    <!-- <div class="control-group">
+    <div class="control-group">
       <label class="control-label">{{ _('Number of LEDS') }}</label>
       <div class="controls">
         <input type="text" class="input-block-level" data-bind="value: neopixel_count">
@@ -454,7 +454,7 @@
         <input type="text" class="input-block-level" data-bind="value: default_neopixel_color, attr: {name: 'colorpicker' } , click: $root.showColorPicker()">
         <span class="help-inline">Value needs to follow the format rgb(value_red,value_green,value_blue) where values should be between 0 and 255</span>
       </div>
-    </div> -->
+    </div>
     <!-- /ko -->
     <!-- ko if: ($data.output_type() == "gcode_output")  -->
     <div class="control-group">
@@ -582,6 +582,14 @@
             <code>i2cdetect -y 1</code> on your Raspberry Pi</span>
         </div>
       </div>
+      <div class="control-group">
+        <label class="control-label" for="settings-enclosure-dhtPin">{{ _('i2c Bus') }}</label>
+        <div class="controls">
+          <input type="text" class="input-block-level" data-bind="value: temp_sensor_i2cbus">
+          <span class="help-inline">This value should remain 1 unless you've used dtoverlay=i2c-gpio.
+          </span>
+        </div>
+      </div>
       <!-- /ko -->
       <!-- ko if: ($data.temp_sensor_type() == "max31855") -->
       <div class="control-group">
@@ -901,4 +909,4 @@
       </div>
       <!-- /ko -->
     </form>
-  </div>
\ No newline at end of file
+  </div>
diff --git a/octoprint_enclosure/templates/input_folder/general_info.jinja2 b/octoprint_enclosure/templates/input_folder/general_info.jinja2
new file mode 100644
index 0000000..da6de71
--- /dev/null
+++ b/octoprint_enclosure/templates/input_folder/general_info.jinja2
@@ -0,0 +1,5 @@
+<form class="form-horizontal">
+  
+
+  
+</form>
\ No newline at end of file
diff --git a/octoprint_enclosure/templates/input_folder/io_output.jinja2 b/octoprint_enclosure/templates/input_folder/io_output.jinja2
new file mode 100644
index 0000000..da6de71
--- /dev/null
+++ b/octoprint_enclosure/templates/input_folder/io_output.jinja2
@@ -0,0 +1,5 @@
+<form class="form-horizontal">
+  
+
+  
+</form>
\ No newline at end of file
diff --git a/octoprint_enclosure/templates/input_folder/main_screen.jinja2 b/octoprint_enclosure/templates/input_folder/main_screen.jinja2
new file mode 100644
index 0000000..4cf6b04
--- /dev/null
+++ b/octoprint_enclosure/templates/input_folder/main_screen.jinja2
@@ -0,0 +1,59 @@
+<div id="settings_inputs_edit_dialog" class="modal hide fade">
+    <div class="modal-header">
+        <a href="#" class="close" data-dismiss="modal" aria-hidden="true">&times;</a>
+        <h3 class="modal-title">Add / Edit Input</h3>
+    </div>
+    <div class="modal-body">
+
+
+        <div class="full-sized-box">
+            <ul class="nav nav-pills">
+                <li class="active"><a href="#settings_inputs_edit_dialog_general"
+                        data-toggle="tab">{{ _('General') }}</a></li>
+
+                <li><a href="#settings_inputs_edit_dialog_io" data-toggle="tab">{{ _('IO Settings') }}</a></li>
+
+                <li><a href="#settings_inputs_edit_dialog_printer_action"
+                        data-toggle="tab">{{ _('Printer Action') }}</a></li>
+
+                <li><a href="#settings_inputs_edit_dialog_output_action" data-toggle="tab">{{ _('Output Action') }}</a>
+                </li>
+
+                <li><a href="#settings_inputs_edit_dialog_temperature_sensor"
+                        data-toggle="tab">{{ _('Temperature Sensor') }}</a></li>
+
+
+            </ul>
+
+            <div class="tab-content">
+                <div id="settings_inputs_edit_dialog_general" class="tab-pane active">
+                    {% include "input_folder/general_info.jinja2" %}
+                </div>
+
+                <div id="settings_inputs_edit_dialog_io" class="tab-pane">
+                    {% include "input_folder/io_output.jinja2" %}
+                </div>
+
+                <div id="settings_inputs_edit_dialog_printer_action" class="tab-pane">
+                    {% include "input_folder/printer_action.jinja2" %}
+                </div>
+
+                <div id="settings_inputs_edit_dialog_output_action" class="tab-pane">
+                    {% include "input_folder/output_action.jinja2" %}
+                </div>
+
+                <div id="settings_inputs_edit_dialog_temperature_sensor" class="tab-pane">
+                    {% include "input_folder/temperature_sensor.jinja2" %}
+                </div>
+
+            </div>
+        </div>
+
+
+    </div>
+    <div class="modal-footer">
+        <button class="btn" data-dismiss="modal" aria-hidden="true">{{ _('Abort') }}</button>
+        <button class="btn btn-primary btn-confirm"
+            data-bind="click: function() { $root.confirmEditInput();}, css: {disabled: !inputEditor.validInput()}">{{ _('Save') }}</button>
+    </div>
+</div>
\ No newline at end of file
diff --git a/octoprint_enclosure/templates/input_folder/output_action.jinja2 b/octoprint_enclosure/templates/input_folder/output_action.jinja2
new file mode 100644
index 0000000..da6de71
--- /dev/null
+++ b/octoprint_enclosure/templates/input_folder/output_action.jinja2
@@ -0,0 +1,5 @@
+<form class="form-horizontal">
+  
+
+  
+</form>
\ No newline at end of file
diff --git a/octoprint_enclosure/templates/input_folder/printer_action.jinja2 b/octoprint_enclosure/templates/input_folder/printer_action.jinja2
new file mode 100644
index 0000000..da6de71
--- /dev/null
+++ b/octoprint_enclosure/templates/input_folder/printer_action.jinja2
@@ -0,0 +1,5 @@
+<form class="form-horizontal">
+  
+
+  
+</form>
\ No newline at end of file
diff --git a/octoprint_enclosure/templates/input_folder/temperature_sensor.jinja2 b/octoprint_enclosure/templates/input_folder/temperature_sensor.jinja2
new file mode 100644
index 0000000..da6de71
--- /dev/null
+++ b/octoprint_enclosure/templates/input_folder/temperature_sensor.jinja2
@@ -0,0 +1,5 @@
+<form class="form-horizontal">
+  
+
+  
+</form>
\ No newline at end of file
diff --git a/octoprint_enclosure/templates/input_table.jinja2 b/octoprint_enclosure/templates/input_table.jinja2
new file mode 100644
index 0000000..e69de29